Westlofty

Hi guys, I managed to get a connector ordered through Autobarn http://aerpro.com/apvty01 which was specifically for the Aurion to connect a factory fitted camera to a aftermarket camera. After spending time time to take the head unit out I realised the connector was different as the MY is different. In the mean time I realised that the head unit is not connecting to my iPhone hotspot automatically wanting me to connect manually every time. So Google maps was not working. Also the audio quality is comparatively low compared to the original Fujitsu unit which is now 6 years old and the Eonon unit takes a lot longer to start up, too I decided to cut the loss and return the unit back to Eonon which cost me $73.00 via Auspost / EMS tracked courier. Unit has been returned and I am for the cost of the unit to be refunded via PayPal. Thanks everyone for offering your knowledge. Cheers!

Thanks KAA, Full-throttle, Texasflysuperstar. I will look into the adaptor before cutting off the DIN connector. Cheers!

Thanks Jacko, No, there is no change in the LCD and yes, it seems it does not get the switching signal. All radio stations picked up without any issue and the unit runs Google maps via my phone hotspot and I also installed OSMAnd the free app that works to be fine without the internet connection. So the short answer is Ididnot buy a GPS Sim. Cheers!

Hi guys, I just installed on my Presara 2010 a new Eonon GA5146F head unit with navigation and all seems to be working well. Except when I enter the reverse gear this unit does not connect to the factory fitted camera. I think the camera line is not connected in the harness provided. Details of the unit is at http://www.eonon.com/Android-Car-GPS/Vehicle-Specific-GPS/GA5164F.html While waiting for Eonon to respond, I am trying to figure out the wiring from the camera so that I can connect it to the input of the unit. if some one can help me figure out the wiring in different DIN connectors in the navigation/stereo area, it is much appreciated. Thanks!