alice1111

I've just bought a new blank remote for my Toyota Does anyone know how to get it to programming mode? I've found some instructions online but they don't seem to be working is getting into the programming mode different for Australian built altise models? if I go through the steps , the car lock won't cycle ... the instructions found here was 1. Driver door open and unlocked. Key out of the ignition2. Insert the key and remove 2 times in 5 sec.3. Close and open driver door 2 times in 40 sec.4. Insert the key and remove it again from ignition.5. Close and open driver door 2 times in 40 sec.6. Insert the key in ignition, 7. Close the door, 8. Turn to on and back to lock in 1 second intervals. 1 time for add, 2 times for rewrite, 3 for confirmation 5 for prohibition. (yes, there is no “4”)9. Remove the key10. Power lock will cycle to confirm 11. For add or rewrite mode within 40 sec of the confirmation, A. press “lock” and “unlock” buttons of the FOB at the same time between 1 and 1.5 seconds. B. within 3 sec press “Lock” button for more than 1 sec and release. C. If it’s correct, the power door lock will cycle once. If it’s wrong the door lock will cycle twice.