DerekD

Hi again,

I have no problem pairing my iPhone to the factory BlueTooth unit in my 08 Presara, but it doesn't seem to transfer things like the phonebook (just sits there saying to get the phone to send it, how do you do that?).

Are there any tricks/tips to get these two gadgets working fully together?

Cheers

Guy

The SatNav unit in the Aurion cannot retreive phonebook data from the iPhone. Only specific phones work in this scenario. I have an iPhone and it works fine except for the phonebook transfer feature, which this I used an old Nokia N95 for. (had my phonebook on it prior to going an an iPhone)

The iPhone does not have this capability hence why it does not work on the SatNav unit.

Tofuboi,

So is the Iphone able to use the phone book which you had previously loaded to the Satnav?

Derek.

This is my 07 Silver Presara with the Lexus Style Grill.

Derek.

Please can anyone confirm that if these smart keys have been previously registered to a vehicle then they CAN NOT be reused on another vehicle!

Example; One from a Wrecked vehicle being reused.

A service adviser at my local Toyota Dealer told me this!

He said to be careful of the ones on Ebay.

Hi guys.

Argie sent me the black grill and I got it delivered today.

I LOVE IT!!

Thanks heaps Argie!!

Here are some pictures of it. hehe

Before

After

Hello JIN,

Can you please give us a quick rundown on what is required to Remove original Grill to do the replacement.

Does the bumper have be removed etc.

Thanks Derek.

i test drove a presara tonite and was trying to activate the lowering of the mirror but failed.

is it automatic?

Hi Freddo,

The Lowering of the Mirrors when in reverse only occurs when the Mirror Selector switch ( Used when adjusting the positon of mirrors )

is NOT in the center position.

You can leave it in the center position when you do not require the mirrors to lower.

Regards

Derek.

Easy put 12 volts via a switch to the red wire on plug H at rear of navigation unit.

Look at attached picture.

H plug has 3 wire only on it.

Hello Aurion ZR6,

I just checked the Manuals and it looks like the Connector is "F13" position 5, See Photo below.

Where did the "H" connector diagram come from?

The reason I need it is because I have a very low Trailer and cant see it in the rear vision mirror.

Also I just like to "play with switches"

When I do the Modification I'll let you know.

Regards Derek.

Well, it took a while but I did it, connected a toggle switch to Pin 5 on connector F13 to 12V+ and it works great. The Warning to "check surrounds"is still there

but I can not tun on the Reversing Camera any time I wish.

All the best Derek.

Hello All,

I have a 2007 Presara fitted standard with factory reversing camera,

My Question is: Has anyone worked out a way to activate the Reversing camera without putting the car into reverse?

I'm hoping its just a matter of installing a toggle switch to override it.

Preferably without the reversing lights coming on.

Thanks Derek.

There's a factory reversing camera? o.O?

Is that just for Presara or u can actually install it on ZR6?

How much did it cost u btw..

Hi VF-X

Camera is standard on Presara and is included in price of car, If you have Factory Sat Nav option, I guess it should work.

Maybe someone that has the Factory Sat nav Option can tell us what is Displayed on the Nav screen when they put their car in Reverse?

Does the Screen change and a warning appear at botton of screen?

Derek.

Easy put 12 volts via a switch to the red wire on plug H at rear of navigation unit.

Look at attached picture.

H plug has 3 wire only on it.

Hello Aurion ZR6,

I just checked the Manuals and it looks like the Connector is "F13" position 5, See Photo below.

Where did the "H" connector diagram come from?

The reason I need it is because I have a very low Trailer and cant see it in the rear vision mirror.

Also I just like to "play with switches"

When I do the Modification I'll let you know.

Regards Derek.

Hello All,

I have a 2007 Presara fitted standard with factory reversing camera,

My Question is: Has anyone worked out a way to activate the Reversing camera without putting the car into reverse?

I'm hoping its just a matter of installing a toggle switch to override it.

Preferably without the reversing lights coming on.

Thanks Derek.

Hi All,

I note that the Presara includeds a 3 yr subscription for Toyota Link.

Wondered how usefull Toyota Link has been. Some of you would have had this feature for about 18 months.

Has it been usefull and would you consider extending this subscrition when it expires.

Also, any idea what sort of $s will be involved to renew subscription.

Regards

Quark

Hi Quark,

One day I left my ignition on in the car ( not use to the press button then ) and about an hour later I get a phone call on my moble phone from a Toyota link operator to tell me that the battery in my car is getting low. Hows that!!!!!!!!!!!

I love it.

Derek.

Hello All,

I thought I would share this you all, I have a 6 Month old Presara that has done only 5900K, nearly all city driving.

I have noticed that bugs are being caught in the radiator fins and causing the alloy to be discoloured, as well as their bodies blocking the radiator fins.

See Photo A,

Note: I removed the bugs with a water hose before this photo was taken

So in an attempt to reduce this I have fitted a Aluminum insect Screen in front of the radiator, the screen is secured at the top and bottom via an alloy rail screwed to the bottom brace and the top radiator mounts.

See Photo B

This View is Front of radiator with screen fitted.

I think if you are doing a lot of country traveling a Bug Screen fitted to the Aurion will be worth while in the long term.

Derek.

Hi..

Just double check when you had your first complimentary service within 3 months or 1500km, do you get oil change?

how about car wash and vacuum?

Thanks for sharing.

No Oil Change Sorry,

My was NOT washed or Vacuumed, but I did get a FREE Coffee and Biscuit while waiting for the courtesy bus.

Derek.

OK There is a trick too it. After much experimenting.

To TURN OFF TRACTION CONTROL

The Procedure below MUST be completed quickly, less than 30 Secs from my testing.

1. Make sure the car is in Park and the parking brake is disengaged before you start the car.

2. Start the engine.

3. Engage the parking brake.

4. Fully depress the brake pedal and then release.

5. Fully depress the brake pedal and then release.

6. Disengage the parking brake.

7. Fully depress and hold down the brake pedal.

8. Engage the parking brake, then disengage it (while holding down the brake pedal).

9. Engage the parking brake, then disengage it (while holding down the brake pedal).

10. Release the brake pedal.

11. Engage the parking brake.

12. Fully depress the brake pedal and then release.

13. Fully depress the brake pedal and then release.

Good Luck & Drive Safely

Derek

Hello MASH,

Ive now been able to turn off the TRC via the procedure I detailed above, ( With car in Park )

But I was unable to turn it off via your procedure while in drive, I must be doing something wrong.

Maybe the foot brake needs to be held on when doing the two park brake operations , If so, that wasnt in your description.

Derek.

Derek, could you please update or modify the steps below since you got it work because if I follow the steps below it doesn't work.

Thanks

1. Make sure the car is in Park and the parking brake is disengaged before you start the car.

2. Start the engine.

3. Engage the parking brake.

4. Fully depress the brake pedal and then release.

5. Fully depress the brake pedal and then release.

6. Disengage the parking brake.

7. Fully depress and hold down the brake pedal.

8. Engage the parking brake, then disengage it (while holding down the brake pedal).

9. Engage the parking brake, then disengage it (while holding down the brake pedal).

10. Release the brake pedal.

11. Engage the parking brake.

12. Fully depress the brake pedal and then release.

13. Fully depress the brake pedal and then release.

Mash,

This is strange, The instuctions above are correct as far as I know, ( It did work last weekend for me )

But now I'm having trouble getting it to work, I suspect it's a timing issue. ( or I'm not holding my mouth in the correct position )

I'll see if I can work it out and let you know.

Derek.

Hello MASH,

Ive now been able to turn off the TRC via the procedure I detailed above, ( With car in Park )

But I was unable to turn it off via your procedure while in drive, I must be doing something wrong.

Maybe the foot brake needs to be held on when doing the two park brake operations , If so, that wasnt in your description.

Derek.

Hello Mash,

I seen another more involved procedure else where on this forum,

Regarding your procedure, I'm having trouble understanding exactly what to do,

1. Brake is spelt incorrectly. ( no big problem )

2. I'm not sure if your refering to the Foot operated "Park Brake" or the main "Brake Pedal" which is also foot operated.

Please rewrite and specify EXACTLY the procedure.

Thanks in advance Derek

Hi Derek,

Cool, maybe you can share the procedure. Anyways, sorry about the spelling mistake, meant to be 'brake'. Ok when I say brake, I mean the normal brake pedal. Foot brake = hand brake. So - Put in drive with foot brake (handbrake) locked - press brake 2 times (normal brake) then foot brake 2 times (must see the handbrake light turn on and off 2 times), then normal brake again 2 times. It will take some practise. It takes me maybe 2 or 3 goes sometimes.. thats why I don't play around with it too much, once you get it, on the right corner you will see the icon light up. Let me know how you go.

I'll Try yours later.

I have not been able to get this procedure below to work as far ( No light comes on at least) May you can get it working!

Member DKzr6 Posted this in June 2007 see Topic heading "Aurion ASC: Has anyone worked out how to turn it off?"

Hey,

THe method below works. But you need to do each time you start the car if you want the TC off. By default it turns back on each time you start the car.

1. Make sure the car is in Park and the parking brake is disengaged before you start the car.

2. Start the engine.

3. Engage the parking brake.

4. Fully depress the brake pedal and then release.

5. Fully depress the brake pedal and then release.

6. Disengage the parking brake.

7. Fully depress and hold down the brake pedal.

8. Engage the parking brake, then disengage it (while holding down the brake pedal).

9. Engage the parking brake, then disengage it (while holding down the brake pedal).

10. Release the brake pedal.

11. Engage the parking brake.

12. Fully depress the brake pedal and then release.

13. Fully depress the brake pedal and then release.

Its a bit convoluted, but i tried it and i works.

Good Luck. I let you how I go later.

Derek

Hi All, I just got my new ZR6 today after waiting for 3 weeks. After I signed all the papers and was given the key, I asked the sales rep if there was a way to turn off traction control he was a bit hesitant but after a few seconds of talk he said in order to turn off the traction control you need to have all doors closed, with the car in drive. With the foot break still pressed, tap the break 2 times, then hold break, push foot break on and off 2 times, then press the break 2 times, after he did this a light popped up on the dash display of a car with swirly lines behind it, similar to the one you see on those yellow wet road signs. But he said it turns off every time you turn the car off and you need to do the sequence again. I thought some of you would like to know...sorry if some of you already did. And also I am not responsible for anything that is caused to you or your car by doing turning off the TRC. Have fun.

Hello Mash,

I seen another more involved procedure else where on this forum,

Regarding your procedure, I'm having trouble understanding exactly what to do,

1. Brake is spelt incorrectly. ( no big problem )

2. I'm not sure if your refering to the Foot operated "Park Brake" or the main "Brake Pedal" which is also foot operated.

Please rewrite and specify EXACTLY the procedure.

Thanks in advance Derek

Hi all,

I have a Presara and would like to protect the headlights against chips / cracks. I've heard someone say that with HID you can't (shouldn't) use any protectors. Has anyone else heard that and can explain why? Alternatively I've seen some plastic rubbery adhesive film that can be trimmed to size and placed over the lens providing protection while being fairly invisible. Anyone have any experience with that?

Thanks.

Have you talked to your Toyota Dealer about the Genuine Toyota Headlight protectors?

I have a Presara fitted with toyota headlight & bonnet protectors, they seem fine to me.

if you get the facotry fitted one, then it will be the one that looks like its part of the dash. if you get it dealer fitted it will be the black one.

Lol... really

Umm i dont think there is a way to force it to play DVD's...... so im guessing you paid a $2000 dollar GPS unit, toyota would be smiling.

Well did you ask which one you are getting?, if you didnt you can guess by the price of it. over 3k RRP will be the factory looking not black one...

i paid over 3k so it should be the silver one then. :) i asked her which 1 i would get and the lady told me that theres only 1 sort and that its the factory fitted version. i just dont want to be shocked last minute if i see an ugly black thing in the middle of the console. :D i paid over 3k so it must be the good looking one :) why is the black version also cheaper? i couldnt also find any features of the sat-nav. would there be any info in the aurion manual?

Well according to the Toyota website, its basically the same as the stock unit unit, minus 2 cd slots, plus GPS and bluetooth which generally comes with gps units anyways these days.

http://www.toyota.com.au/Accessories/acces...64_1312,00.html (though this ones for the black unit).

Im guessing the black one is cheaper because its a pretty much like an aftermarket option, doesnt blend as well as the silver one and plus the silver one i assume Toyota assembles these whereas the black one is probably from a cheapo company rebranded.

Some thing I just noticed is the Black version has a AUX input, which is definitely NOT on the Factory fitted version.

And the Black one does not have FM2 ( I dont what this is, but it hasnt got a button for it )

Ehh all sportivos come with a 6 cd stacker, either you got jibbed or you need to go back and get it fixed.

You Didnt read the post, he said he had sat nav!

Which means it is a 4 x CD NOT a 6 x CD

Happy New Year to ALL Aurion owners.

Remote Transmitter or

Programming New Keys or

Smartkey Programming

Try the above website it might be the same as ours.

Cheers Drew

Hello Drew,

No that was not what I needed, Thanks Anyway

Derek

I've just brought a 2nd Hand Smart Key for my Aurion Presara,

It’s exactly the same as my other two keys. I believe it’s from a wrecked Aurion.

Does any one know how to

1. Wipe the memory of the 2nd Hand key. (If necessary that is)

2. Assign this new key to the car so I have three Smart keys?

Any Help would be appreciated.

Regards

DerekD

Hi guys,

I'm new to this forums :)

Just to clarify some points...

- The Navigation system for the middle-east markets is completely different than the one for Australia/USA...

- To play a DVD, just insert the DVD in the CD slot.. The system will read it..

- To play DVDs, the car has to be stopped (0 km) and the e-brake has to on... Gear position has nothing to do with the DVD...

- Once you drive (or E-Brake is off), the screen will turn back to the Nav screen but you will be able to to hear the movie...

DerekD,

You explained how to bypass the Bluetooth, address entry.. But, how did you get rid of the (Agree) screen???

Here is a picture of the Middle-East Spec Navigation.. .Notice the (DVD Video) just underneath the volume knob (left side):

Ahhhhhhhh I see, Thanks Unknown2 That answers a lot of questions.

The Mod to Bypass the Nav system " Safety Feature" does NOT affect the I agree screen.

But I have just fitted the VAIS Ipod interface from http://www.advancedice.com.au/ and with this interface the agree screen is no longer there.

Hello AL-Sayegh I'm sure there will be a "Fix" for your problem, but as your Nav System is Not used in the USA or Australia, its going to be difficult.

There is No reference to "Park Brake" on the Australian/US Block diagram. See Photo Below. Good Luck.

Hello DerekD,

Thanks for your interest and replay.

for the questions you asked here is the answers :-

Are you saying that you have been able to play & view a DVD movie on the Aurions Standard Nav Screen when the Car is stationary in "Park" and has the park brake on ?

Yes, It's an available future on the AURION NAV System.

But the car Gear Shift should be in Park position and the foot brake ON.

What Model Aurion do you have?

Aurion GLX

What year?

Aurion 2007

What Nav System Manufacturer ( If known ) and software version?

TOYOTA AURION Nav System.

Also what part of the world are you in?

I am In United Arab Emirates ( Dubai ) .

The same Nav System installed for Gulf Region.

What 'Region' is the DVD?

I thing it's Region Free OR Region 0 .

Can you post a photo of a DVD playing?

I will do that next Post :)

for your replay : Please advise as I have been able to disable the Nav System "safety feature" that stops Destiation changes and Blue tooth phone book access while moving.

I need to ask you also the same question you have asked me ? and to disable the Nav System "safety feature" what was the procedure you done.

One more thing, do you know where I can have the Wiring Diagram for the Nav System, any comment will be very help full.

Thanks.

You forgot to answer the MOST IMPORTANT Question , What procedure do you do to get the DVD to play?

The Mod I used to get around the Nav system 'Safety Feature' has been posted previously, BUT here it is again.

This little modification works for me I have a new Pressara, I put the switch into the Ashtray area, just to the Left of the ashtray.

This is from the US Toyota Owners Club Forum, "Toyota Owners Club - USA > General Toyota > General Toyota Discussions" Originally entered by Member vic334

2007 Camry Navigation Modification to enter destinations while moving, Adding a switch to defeat the speed sensor

There is a way to enter destinations while driving. I added a switch in the back of the center cubby. If you pull the radio/navigation unit out of the dash there is a gray plug that has 3 wires. The center wire is purple/violet colored and this is the speed sensor. When you are moving more that 5 mph the speed sensor ghosts out the input buttons on the screen keeping you from entering destination info to your nav unit. I cut this wire and connected a 2 wire speaker size line to the free ends of the violet wire and put 2 terminals on the other end and connected these to my secret switch in the back of the cubby. This works like magic. Going down the road I flip this switch and the ghosted out destination buttons on the screen light right up. If you are mechanically inclinded at all this is relatively easy to do. The only part I couldn't do myself was remove the air condition vent above the navi unit. Your dealer or a stereo installation place could do it for you. There are winged clips 2 on each side of the vent unit which must be pushed inward on both sides before the vent assembly comes out. After this you unscrew the shifter knob remove the 2 wings on either side of the cubby by pulling them straight out toward the back of the car. Then you remove the trim around the shifter pull it straight up and back. Then remove the top of the center console by lifting it straight up. Remove the 2 phillips screws holding the cubby in and remove it. The entire radio/navi unit and aircond controls are 1 unit and are held in by 2 10mm bolts on top and 2 on the bottom. The radio unit then pulls straight out of the dash. There are 8 or more connectors plugged into the back of the radio but you are looking for a gray plug in the middle of all these with 3 wires with the center wire being violet/purple, the speed sensor. I soldered my wires but you could use crimp connectors and a rocker switch #275-693 from radio shack. I used a dremel tool to cut a hole out in the back of the cubby between the power point socket and the ipod connector. I knew this could be done because I did a similiar deal to my 2006 prius. This procedure works perfectly on both cars and now I dont have to pull over on the interstate for my passenger to input things into the navigation. This may also allow you to input into your bluetooth phone but I haven't tried this yet, but I know there is only one speed sensor on the back of the navi unit. The prius has multiple speed sensors to the display so there are more wires to cut if you want to enable all the features once you are on the move. You will notice when you activate your secret switch the little wheels on the consumption screen will stop moving just like you are stopped. I know the early 2007 camry had a secret diagnostic screen you could access and people think version 5.1 of the nav DVD is the thing that enables this override button, but from my discussions with technicians the lockout is built int the nav unit itself and not controlled by the DVD disc, I have version 6.1 in my car. I had a toyota service tech look up the wiring diagram to tell me which wire was the speed sensor. I wish I knew how to post pictures but this description is pretty good. As long as you are gentle you won't break anything, but you will need to have a special tool or help getting the aircond vent out to do this. Hope this helps everyone. I just couldn't help it, I hated being locked out of my nav unit going down the road. This would also be a good time to add an XM receiver unit to your car as the radio must be brought out from the dash to plug in the XM harness into the back of the radio. The XM receiver mounts in the right side of the trunk above the battery, the antenna mounts under the back window next to the 3rd brake light. I got my unit from camelback toyota in arizona for 159.00 and the fit kit for 80.00. Be sure to get the 15 page installation instructions available only from a dealer and you can put this XM in yourself and save $200-300 labor. It takes some time 2-3 hours but since you are removing the radio anyway you might consider it.

Very Important, Navigation Hack !

Hi every one, it’s Long time since my Log in Sorry for that.

Today I have a very interesting question about the Navigation system In AURION !

the Navigation system have the ability to play DVD Movies under circumstance condition ,

1) The Gear should be in Parking .

2) The Foot Brake should be applied .

I review the Manuel and found that the Navigation system connected to the Car ECU through many sensors

1) Speed Sensor.

2) PKB Parking Position sensor .

3) Gear Park position .

My Target is to make the Navigation system play the DVD moves while the car is moving  .

I am sure there is way to do it  I have done it with my Mercedes Benz CL500

Surfing the inter net found some way to hack the Navigation system but I am looking for the wiring diagram for the Terminals Of The ECU .

Where it describe each wire connected to … and the Number of that .

I found an interesting site but it require to subscription with them 

Please if any one figure to make the Navigation system play the DVD moves while the car is moving Post your replay

Thanks for this wonder full team and members.

Hello 'AL-Sayegh',

Please clarify a few points,

Are you saying that you have been able to play & view a DVD movie on the Aurions Standard Nav Screen when the Car is stationarty in "Park" and has the park brake on ?

If so,

What Model Aurion do you have?

What year?

What Nav System Manufacturer ( If known ) and software version?

Also what part of the world are you in?

What 'Region' is the DVD?

Can you post a photo of a DVD playing?

What procedure do you do to get the DVD to play?

Please advise as I have been able to disable the Nav System "safety feature" that stops Destiation changes and Blue tooth phone book access while moving.

DerekD