exhaust setup for zze122r sedan

[shmicko]

Finally had time to get my sportivo catback fitted. Went to Glenroy Exhaust, It couldn't be estimated if the cat-back would bolt on or not. He had to try fit it for him to know if it will bolt on or not.

He fit the mid section in o.k. then when he tried bolting in the muffler, there was a problem straight away. The connection between the end of the mid section and start of the muffler didn't fit. The piping was out by atleast 10cm. So you would probably need to cut abit of the mid section off. Then there's problems with the muffler aswell, as it is smaller than the sedan version.

Tried to explain it with a simple picture, hope it makes sense.

picture is only an example. So without modifications it will NOT fit.

Waisted $50 for cutting and welding back my original exhaust, but atleast now everyone knows it won't fit without modification.

Thanks Marcus, I should of listened to you from the start, now I know your not like half the guys on this forum. :D

Edited May 14, 2007 by shmicko

[LiMz RoLLa]

I told you it wouldn't fit. I myself have tried to fit the sportivo catback and is not direct bolt on.

[XploShun]

hey! does anyone know if the s12 shorter/longer than the sedan's?? will it fit?

im thinking of selling my s12 to my friend for cheap...

[shmicko]

I just got a 2.25" cat-back system fabricated and fitted @ Glenroy Exhaust.

Here's a clip, I' not sure sounds a bit too loud on idle for me..

[XploShun]

I just got a 2.25" cat-back system fabricated and fitted @ Glenroy Exhaust.

Here's a clip, I' not sure sounds a bit too loud on idle for me..

what muff is it?

anyone got a twinloop on their sedan??? with stock cat?

[$ANGELO$]

I just got a 2.25" cat-back system fabricated and fitted @ Glenroy Exhaust.

Here's a clip, I' not sure sounds a bit too loud on idle for me..

what muff is it?

anyone got a twinloop on their sedan??? with stock cat?

ive heard good things about the twin loop so i decided to get one for my sedan i had a look at both the s10 and s12 and chose the s10, not much in difference but i like the way the s10 has the outlet lower than the inlet, if that makes sense where as the s12 is inline. just means it will be a nicer fit dont have to cut the rear bumper or have the tips on an angle. getting it fitted next week...