Jump to content

gen3 v6 getting hot


Gibbo

Recommended Posts

Hi again, ... my car got real hot, steam...

but still runs after cool down ok, no water in oil but it is probaly a head or head gasket. since it has a new readiator and stat...form PO

question: as a capable DIY backyard fixer, is the head on v6 doable for me...?

Seems it is a regular thing, should a maybe just tighten the head down,

Why do so many have this had problem, mine has 170K Auto.

Thanks

Link to comment
Share on other sites

Hi again, ... my car got real hot, steam...

but still runs after cool down ok, no water in oil but it is probaly a head or head gasket. since it has a new readiator and stat...form PO

question: as a capable DIY backyard fixer, is the head on v6 doable for me...?

Seems it is a regular thing, should a maybe just tighten the head down,

Why do so many have this had problem, mine has 170K Auto.

Thanks

since the moyor had no 'miss' and the water was not'low' after being so hot, I thiught, funny... hummm

and so ren hand over radiator and pasenger side was COLD...

The top tank hhad been done 15k ago and was blocked again allready...

Hope that helps someone... I nearly took the heads off :)

Link to comment
Share on other sites

What's the temp read on the dash? Should be exactly half way. The 4 bangers sit just below half way...

well for the first 5-7 klm it sat midway, then slowly rose to just below red, then I pulled over...

Update; Just put the radiator back in after the shop removed the tank and cleaned it out... he said it was 80% blocked, that they do a lot of 3vz engines with some 200K... so watch for it,

easy to check, warm motor and feel the inside of the radiator fins... should be uniforly hot

just cost $100... lot cheaper than head job.

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Forums


News


Membership