need some serious intake help atm

[dweebz]

hey guys alright my car is apart right now to intall the intake.

first question when i remove everything after blue plastic thingy. can i just disconnect the brown thing completely?

http://www.toyotaownersclub.com/gallery/albums/au/brown_vsv.jpg

please someone help!!!

my number is 0430803061

EDIT/UPDATE

kk so i got everything in perfectly. loving it but one extra question what happens when u use a ***** pod? will it stuff up the car? atm im using some gerneric pod so yeaaa. is it bad for the engine.

Edited August 10, 2011 by dweebz

[dweebz]

oh yea can someone tell me the diameter of their inlet and outlet? for some reason the one i have the entire pipe is 2.5 inch. so i need the smaller pod. i thought 3 inch was the norm.

also when i turn off the engine it seems like it sucks in all the remaining air. is this right?

[frankii]

also when i turn off the engine it seems like it sucks in all the remaining air. is this right?

Yep thats right.

[2times]

DUDE! i did the exact thing this arvo and came to post the same question!

good to know the sucking when shutting off is normal!

can someone please clarify what the "ODB" canister is supposed to connect to after install? its the brown one...

with my DYI today i took off one of the lines and then plugged the other one back into it. car runs fine, been for a long drive... BUT is there something better i should be doing?

heres a pic of what i did.

[dweebz]

dude i can help you there. i found a K&N SRI install guide.

and pretty much u disconnect the blue pipe which is connected to the manifold and put a plug there.

and everything after that u can remove from the car. so like all them lil tubes and also the brown thingy.

And on the intake theres like a little hole on the side. block that off to.

hope that helps

[dweebz]

oH can someone tell me the diameter of their intel and outlet of their intake? i got a cheapy one so i dunnoe if its right.

[2times]

Thanks Dweebz!!! i plugged the little nozzle for the vacuum tube with a little black cap from the stock air box. ill plug up the other stuff tomorrow.

sorry i dont have measurements for ya, didnt bother measuring. i can tell you that mine is about 5mm smaller than the throttlebody and its an injen RD2081blk... hope that helps.

Thanks for ya help dude!

[Kenshin X]

get a good pod, flow and filtration is important for a healthy engine. i personally use the 3A racing one

[dweebz]

get a good pod, flow and filtration is important for a healthy engine. i personally use the 3A racing one

ahahah yea i just went to buy one today for $40 way cheaper than K&N. i was looking through ur thread and copied. :D