URGENT HELP REQUIRED (CAI RELATED)

[MotoMan]

Does the TRD cai have a little nipple on the bottom for the stock vacumm line?

Ive go the injen and the only thing left is to plug in the stock vaccumm line... but ive got no idea where to disconnect it from etc...

any help, pictures anything would be greatly appreciated

[darkeh]

i got the simota so had nothing either, i unplugged it just after the blue round thingy on it and plugged it with a screw ;)

[MotoMan]

Nah im talking about the actual piping... there is a small nipple just under the air flow sensor... doesnt matter... i just blocked it off

[MR22ZZ]

is that the small bit of pipe that comes out from the back of the main pipe?

as the design of the AEM is very similar, I blocked mine off by cutting the supplied vacuum hose (it connects to the lower VSV in th US models) just longer then the bit of pipe and screwed a bolt into the end of it (cost about 50c from Bunnings) take the tube in with you so you know the right size to get too ;)

Edited September 1, 2005 by Blue_Stivo

[oz_viking]

Sounds right - but check your vacuum line connections with Danthuyer's CAI install guide:

here

[MotoMan]

its all good now... blue stivo was right... its an extra vaccum hose USA has... blocked off.. now i have to go for a test drive :)