Jorgeo

still not working, need help please.

yes it starts to load then goes to that screen, and I have tried without the sd card, no go.

Hi all, I have a Auspac Gps/dvd unit, my gps will not load, all I get is a sysupdater screen, I have tried reset, disconnecting, formatting Sd card and reinstalling maps but nothing has worked. The dvd, radio and reverse camera all work fine but when I go to nav it goes to the sysupdater screen. I have been searching for days for any answers but have come up with nothing, I know a lot of u have or did have this unit, so I am hoping someone can help me. the unit is 4 years old and is due for a update but money is tight at the moment and was hoping to get 12 more months out of it. I have been looking at Hollowmans posts which say that u can update these Chinese systems but I cant find any links to do a system update, I was hoping that might fix the problem. Any help will b appreciated, I have Att a photo of the screen it gets stuck on. Thanks.

hi guys , I have a old auspac unit, I was wondering if there is a firmware update for this unit, I would love to change the interface, its realy cheap looking.

after the crapy service i received at Wollongong toyota, i decided to try albion park toyota. and i am pleased to say i am very happy with them.

for anyone who is interested 20x8.5 fit, just. tyres are 225/35/20 you could go 245 on the rear and still be inside the guard. insurance are ok with it, all they are concerned about is getting a higher premium. anyway glad that's over with, found it very hard choosing wheels I liked. ended up with advanti's, added a few pics.

thanks Ronnyboy that matches what the wheel shop dude has said. should i be asking about the offset which is +45 yes? i was wondering would it be better to stay with 18s and lower the springs, would that handle better and be a smother ride then going bigger? members personal experiences would be appreciated. found this sight to be very useful with choosing wheels. http://vrimz.com/ would you be interested in my 17s for your camry

I have no knowledge when it comes to wheels or tyres, so buying has become a headache. I have spent a long time searching this site but there is so much info im findig it hard getting a simple answer. what I want are 19s or 20s without mods, I found some nice wheels {race spec RS-X 19x8.5 photo att} but was told 8.5 was to wide is this true? 19x8 will fit but they do not come in that size, I have also been told tyres need to b 35 series if I get 19s, will this be to low profile and ruin the ride? what I need to know is what size to ask for with 19s or 20s that will fill the wheel arches nicely and not ruin the ride, for eg will 245/45/19s be OK, or will I need lower profile. I need to get wheels now as tyres are bold. my ride is a black ZR6. thanks for any help.

has toyota acknowledged there is a problem with pulling to left, and are they fixing it? they had a go at fixing mine but problem still there.

If anyone is interested my unit had a faulty Gps receiver, sent it to Rob and he replaced board. only took a week to get it back and unit is working well.

looks like GPS receiver is stuffed, Rob has sent new antenna but still want work. now I have to pull unit out again and post it to Melbourne. I was wondering if anyone else with this unit has had hardware failures and sent it back for service? and was it fixed properly and quickly. Thanks for any replies.

Hi, Once it says OK down the bottom. Press OK at the top corner of the window. This closes the update program. Remove the SD card and restart your satnav software. If the update does not start automatically, go into the satnav options and setup the update as the file to run when you start your satnav. When you start your satnav the software will run instead. Once finished make sure you change the setting back to your satnav folder so that it will run. Daniel. the update Rob sent me would not work, windows said cant open fw file. That's why I searched for another update, found the one I posted, everyone on that forum who used it said it worked great, giving there units faster sat tracking etc. I was wondering whether anyone on this forum has used it. sorry to here about your car.

I have been looking for a fix for my gps and came across this firmware update, I was wondering if anyone has used it on the auspac unit? Homeland Secuirty Report of GPS Week 256 Rollover problem [uscg.gov] NAVCEN GPS ADVISORY REGARDING GPS 256 WEEK ROLLOVER The USCG NAVCEN has received multiple reports of GPS problems beginning on or about 11-14 June 2009. During this timeframe, two of the counters providing a truncated representation of GPS week in the GPS navigation message reached their maximum value (255) and reset to zero. This is a normal, documented behavior of the GPS signal, but past observations have shown that some GPS receiver sets do not properly process this event. NAVCEN recommends that anyone with a GPS receiver which began experiencing problems during this timeframe consider consultation with the receiver's manufacturer. Background information follows: GPS time is defined by a week counter as well as a time of week counter. These counts, respectively, started at 0 roughly at midnight UTC, 6 January 1980. The GPS broadcast provides truncated representations of the GPS week count in several different locations of the navigation message, including: * Subframe 1 (10 bits): WN: Resets to zero every 1024 weeks and is a truncated representation of the week count corresponding to current GPS time. * Page 25 of Subframe 5 (8 bits): WNa: Resets to zero every 256 weeks and is a truncated representation of the GPS week count corresponding to the broadcast GPS almanac's time of applicability. NOTE: The GPS almanac's time of applicability is, based on current MCS software, projected roughly three days into the future relative to current GPS time, and therefore can show an updated week count that is first noticeable on late Thursday or Friday instead of Sunday. (IS-GPS-200D, Section 20.3.3.5.1.5). * Page 18 of Subframe 4 (8 bits): WNt: Resets to zero every 256 weeks and is a truncated representation of the GPS week count associated with the UTC time parameters. (IS-GPS-200D, Section 20.3.3.5.1.6) It appears that certain types of receivers are continuing to have problems with the rollover even past the rollover date. If your's happens to be one of them, please contact your GPS equipment manufacturer to see if they have a fix for you. If you have comments or question please contact: Rick Hamilton CGSIC Executive Secretariat USCG Navigation Center 703-313-5930 6/17/09 09:00 PM PST Official Fix & Instruction http://www.navsupport.net/gps/quickfix/ Download: ftp://fwupdate:fwupdate@122.146.3.141/nk.bin (FTP) Alternate: ftp://fwupdate:fwupdate@122.146.3.142/nk.bin (FTP) Alternate: ftp://supauser:none@122.146.3.141/nk.bin (FTP) Alternate: http://www.mediafire.com/file/mhj...Staple.zip (HTTP, zipped) Notes: - Click the top link above for the instructions. - All files above contain the same nk.bin file. - All files above contain version 3.25 of the firmware (gps2gmouse.3.25.00.bin) which is newer than the one included in GPS-update-20090615.rar, lark_gps.zip, or Godspeed.rar. - SHA1 hash for the NK.BIN files above: fac8a2f4768c327be2400873c74c69141104186a Advanced If you prefer to manually update the firmware to v3.25... Extract the following to the root of the SD card, insert the card back into the GPS, turn on, browse and double click on the update executable using file explorer... Download: http://rapidshare.com/files/24583...e.rar.html Hash If you would like to verify that your v3.25 firmware download is not corrupt: fac8a2f4768c327be2400873c74c69141104186a *nk.bin 264152ed143964b7200d31e1b9062de9e1e6ebdf *gps2gmouse.3.25.00.bin You will need a SHA1 checksum utility like cyohash [cyotec.com] to compare the hash. Alternatively, just download the ZIPed file above. Extracting the zip file successfully will also verify its integrity. Bring it to a Staples store Starting Monday June 22, you can also bring your Omnitech GPS to a Staples store and let them update the firmware for you. --------------------------------------------------------------------------------

Hi DKzr6, Rob sent me update with these instructions, is this what u did to your mates unit? what he says about stuffing it up has me worried. I am a bit confused about what to do after update has finished, Rob says remove SD card and finish update, he says I should see a window that says "update OK". I have attached photo of it, do I just click OK on it and that's it or what? Thanks for your help. from Rob, below [i am not sure this is the problem but the files are attached. Uncompress the attached file and copy it into the root directory of a blank SD card. Insert this SD card into the unit then power on the unit again, the software should automatically update. If it fails to update automatically, choose"autorun.exe" from "navigation setup" in NAVI mode and return to click "navigation" to start the update. It is important that there is no power disruption or DO NOT POWER OFF the unit during update, or else the IC will be burnt, and the unit will be bricked. After the update is finished, it will show the attached picture "update ok". Then remove the SD card and finish update to see if radio can receive GPS signals now. Regards Rob]

thanks mate, i have asked rob to send me update. i will let you know what happens, thanks again.