XploShun

I prefer what I've specified if possible. :)

:lol: :lol:

i've asked if we're able to get different coloured splash..

let u know when he replies

so it is this!

1ZZ

1. XploShun -

2. ¥URO - Matt black can with red splashes

2ZZ

3. thegourou20 - Red can with white splashes

4. Guni - Red can with white square and black splashes

5. cypher - Matt black can with red splashes

6. iNdCeNt - Purple can with and black splashes

7. kolourhero - Matt black can with red square and black splashes

8. azzman372 - Red can with white square and black splashes

9. Brad-dreama - Gloss black with red splashes

indcent

for borders, i think its better to ignore it

look at the pic that yuro posted, the borders look crap!

even the pic on a computer is that bad.. i doubt it's gonna be good on the can

azzman372 & guni

i'm not sure if he makes them with white square..

saikou sent me a photo... RED + BLACK

you sure you don't want this instead?

brad will be paying me this thursday! it's getting there guys!!!

Can I have this please on a gloss black can

Thank you ...

so it'll be BLACK + RED square + WHITE logo????

or BLACK + WHITE logo

man.. this colour business is more confusing than the hose measurement!

ALSO!!

PM ME YOUR EMAIL ADDRESS!

i wont be using toca's PM after this

guys.. can't you make it simple? soooo fricken long!

new list!

1ZZ

1. XploShun - NSW (Paid)

2. ¥URO - NSW (Paid & will Pick-Up) (Matt black can with red logo)

2ZZ

3. thegourou20 - VIC (Paid) (Red can with white logo)

4. Guni - VIC (Paid) (Gloss black can with white logo)

5. cypher - WA (Paid) (Matt black can with red logo)

6. iNdCeNt - NSW(Paid & will Pick-Up) (Purple can with black logo and white border)

7. kolourhero - VIC (Paid)

8. azzman372 - NSW(Paid & will Pick-Up) (Red can with white logo and black border)

9. Brad-dreama - NSW (Gloss black with red logo)

check it up yourself..

i'll copy and paste this to the email

for me: All black can with red logo Please (photo attached) :)

Btw mIC, any word on colours available from Saikou Michi sales ppl?

Cheers

think i did put siakou's reply on page 2..

he does normal colours and told me he will update the site..

bottom left hand corner of the homepages... info about the colours

so stivo guys.. 9mm in/out IT IS!!

1ZZ

1. XploShun - NSW (Paid)

2. ¥URO - NSW (Paid)

2ZZ

3. thegourou20 - VIC (Paid)

4. Guni - VIC (Paid)

5. cypher - WA (Paid)

6. iNdCeNt - NSW(Paid) (Pick-Up)

7. kolourhero - VIC (Paid)

8. azzman372 - NSW (Paid) (Pick-Up)

9. Brad-dreama - NSW (Black with Red or Silver logo)

Brad, matt black or glossy black?

guys if you're looking for the 22mm hose... please do it asap..

kevsta did find it but they are truck hoses which are fricken hard... can't bend and flex

If you can't find the right hose what's stopping your from using the factory hose? Unless it's too short, which in most cases it isn't..

Looks a tad challenging as I have an airbox there ....

thought you have an intake as well...

just attach it next to the battery

IMO.. 9mm will be better for you guys

1. its 9mm in the other end anyway so you're only extending the 9mm part of the hose NOT decreasing the whole hose from 22mm==>9mm

2. you can probably use it in your next car since most other cars are running 9, 12, 15mm

i reckon the only bad thing is you can't use coloured garden hose XD

btw, let me know what colour you want!

i'll update the list!

wow!

red can with white logo with black borders!!

can he make that?!

lol~

just read the whole gb, your questions have been covered already

anyway, think i will have everyone's money by this week

its time for the colours

from his site he didnt mention about the logo but im sure he still can do it

and for 2zz owners.. i guess 9mm in/out it is??

come on guys!! REPLY!!!

what excatly would i get from installing one on my stivo? im curious lol. i thought most people with a FI would use these not NA/

all these catch can does the same job but saikou's has better design and does a better job

if you read his site, hes got oil catch can for lotus exige and stuff.

so if it good for the exige then it should be good for you stivo guys

In terms of colour, what part are we actually specifying the colour? the actual can itself (in black in original picture) or just the logo (silver)?

colour of the CAN and the LOGO

no colour coding.. just normal colours

Can we use the dimensions that and1 has? Since it seems his is working? lol. and sidenote I have paid you XploShun. Let me know when u get my payment

updated list

thats what i'm asking but no one is replying!

and1 is using 1 stock hose too

if you guys are fine with it, i'll order it this week

and then tell me what colour you want..

i'll let yuro know..

and cypher.. what's happenin?

thx and1 for helping me out!!

hey~

think the best way for the 2zz is to have a 9mm inlet/outlet for the can

use your stock hose and connect the HOSE 2 (9mm) to the TANK without removing the HOSE 4

HOSE 2 & 4 are the same hose

i was looking for a hose reducer on the net 22mm==>9mm... but no luck! think its too big

is it ok?

if yes, i'll start collecting money again

Why is it that we can't have a 9mm inlet and 22mm outlet? Just curious

i have no idea.. LOL

so are you guys ok with that measurement?

most of you guys have paid for it but doesnt reply.. what do you guys want????

i dont mind keeping the money! XD

thx and1 for helping me out!!

hey~

think the best way for the 2zz is to have a 9mm inlet/outlet for the can

use your stock hose and connect the HOSE 2 (9mm) to the TANK without removing the HOSE 4

HOSE 2 & 4 are the same hose

i was looking for a hose reducer on the net 22mm==>9mm... but no luck! think its too big

is it ok?

if yes, i'll start collecting money again

is this groupl buy still on?

yes it is

thx for the photos and1 and azzman for the measurements

so what do guys want?

a 21mm valve on the CAN? to match no.4? but i was told that a hose that big will be too hard to use

do you want to get 9mm valve on the can instead and get a adapter (9==>21) to connect it to the no.4

im shocked that its really that big!

its even bigger than 2JZ engines... but the other end is only 9mm.

did a search and found this

http://au.toyotaownersclub.com/forums/inde...showtopic=12022

i have no idea what that jack au did..

but i also checked the link inside.. its in JAPANESE..

http://minkara.carview.co.jp/userid/250163...20676/note.aspx

i think CHA5E told him not to touch hose no.2 & 4 shown in that jap website.

am i right??

also the japanese install guide says the hose ID for no.1 and no.3 are both 15mm (5/8")

now guys.. go do some measuring!!

OK count me in as well.

2zz - NSW

I'll try to help out with the hose dimensions when i get a chance to go to my car.

Just to clarify, we need measurements for all 4 points in the attatchment image?

thx mate!

well, kev said its 2 and 4

but it doenst hurt doing all 4

added!

thx kev!

i dont know about sportivos, sorry guys!

so its no.2 & 4? not no.1 & 3?

then.. wts that jap doing?

measure the OD of the valve

just wait for mario!

No. 2 to No. 4 is where the oil cat can needs to sit between on a 2zz. If you undo the hose at no. 4, you'll notice some residue oil in the hose. Whereas No.3 won't have any oil in it.

No. 4 is about 21-22mm, someone needs to measure it exactly, as I have given up on trying to find hose that's 22mm and flexible.

did a search and found this

http://au.toyotaownersclub.com/forums/inde...showtopic=12022

i have no idea what that jack au did..

but i also checked the link inside.. its in JAPANESE..

http://minkara.carview.co.jp/userid/250163...20676/note.aspx

i think CHA5E told him not to touch hose no.2 & 4 shown in that jap website.

am i right??

also the japanese install guide says the hose ID for no.1 and no.3 are both 15mm (5/8")

now guys.. go do some measuring!!

sorry just logged on and saw ur msg, ill have a measure tomorrow morning and will advise

great!

thx mario!!

the available colours are: Matte black, Red, Glossy Black, and other normal colors

but NOT polished.

what's going on guys?

Any install guide?

there is

http://owf.fr33forums.org/tips-for-fitting...-can-t1242.html

replace 33 with ee

take out the hose and measure the inlet/outlet valve

did a search and found this

http://au.toyotaownersclub.com/forums/inde...showtopic=12022

i have no idea what that jack au did..

but i also checked the link inside.. its in JAPANESE..

http://minkara.carview.co.jp/userid/250163...20676/note.aspx

i think CHA5E told him not to touch hose no.2 & 4 shown in that jap website.

am i right??

also the japanese install guide says the hose ID for no.1 and no.3 are both 15mm (5/8")

now guys.. go do some measuring!!

sorry about this hose size issue

didn't know you guys have different hoses

I'll wait until you guys can confirm what inlet/outlet nozzle size you need for the 2zz

I've asked and1 already.

need a couple 2zz owners to measure it so we can make sure its 100% correct!

site never mentioned about colour coding so i highly doubt it.

the trademarks colours are the 1s on the left of the homepage

for the can colour... will let him know with all the measurements when we pay him..

if he doesn't do it.. pick the 1 you see from his site

ok.. will pm you kolourhero

but are you 2zz guys going to measure the hose?

I need the ID

i asked saikou whether he can paint the trademark... or even the can

he said he can paint the can... so i assume he can paint the trademark at least...

whos going for pink?

[edit] i can always refund! im not gonna take the money and run :P

there's no problem for the 1zz

but 2zz.. if you're unsure about it.. go measure it!

dont think yuro will mind waiting for you guys