Alfred Q

Hi Guys!

I finally decided to replace my old Chinese replacement HU with a new Chinese HU!

The old one worked great but it was about 4 years old and had some problems.

I bought this unit (Hope the link works)

http://www.ebay.com/itm/251236906749?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3

Everything is working and looking good except the reversing camera. The new unit uses a can bus harness (which does not fit anywhere in the Aurion) one is can rx (pink wire) the other is can tx (blue wire)

I assume these are the one who tell the unit when the camera is powered on BUT I was wondering if there is somebody who experienced this already and what the best course of action would be. i.e a harness adapter? direct wiring (but where?)....

The harness that is "empty" but does not fit is behind the original unit and has 2 wires one red with silver dots and one white with silver stripe.

I assume the red one is parking 12 V+ and the white one -?

besides the can bus harness coming from the unit I earthed the pink wire to the case as per previous installation and I also have a brown "Reverse" wire ....I assume that needs to be earthed as well?

Unfortunately this unit did not come with a wiring guide or a manual so I am just trying to see if someone has seen this before!

Thank you and all the best

Alfred

PS. I did search the forum but can bus rx/tx did not bring anything up!

God bless.............

Recieved a reply from the seller with a picture of the Ipod menu - not from the very same unit but the exact same software etc that's used for other cars.

So they're making improvements, but still got a fair way to go.

Thanks Darryl and Steven! Yes, this interface looks heaps better no doubt.

See if I can sell my unit off and get my hands on this one...after all, I have all the wiring done already.

All the best

Alfred

Hey guys. On the topic of eBay head units, I came across this one that I would personally think looks promising. The front of it looks completely identical to the Auspack unit, but it seems like it's insides have been given a fresh update. The main one being the higher resolution screen compared to the bulk of the other units out there. Most of the 7 inch screens you find on these things are 480x234. This one here has an LCD screen resolution of 800x480. It also appears to be a better quality TFT screen judging from the richer colours on it. This would mean that it would hold up better in direct sunlight. As well, the interface seems to be really neat and tidy. It even has a built in digital TV tuner. If I didn't already have a head unit, I would be putting some good thought into this one.

Thanks Darryl!

That looks like a great unit!

Good value for money it seems. It must have come on only recently as I spend quit some time researching before deciding on the digi_options unit. Would have been a shame if I had missed that one!

Thanks and regards

Alfred

Good stuff champ, glad you didn't have any major issues.

To get speaking street names you need to select a voice which says TTS next to it, I am assuming you have selected a British voice with TTS next to it. For some reasonthe British TTS is not loaded onto the SD card, and selecting it will result in no spoken directions at all. When choosing a voice scroll down and find an American voice which says TTS next to it (if you want spoken street names) or any other voice if you don't care about spoken street names, that will fix it up for you.

What issue are you having with the steering buttons?

Cheers,

Cheers Imposter, found one American voice with TTS (Susan?) & that did the job. Thanks mate. Would be interested to see if I could get other voices loaded onto the SD card so will do some research during spare time this coming week.

I guess it is a deliberate design not to be able to listen to the radio or a CD whilst the satnav is operative.

No major issues with the steering buttons (AT-X) - I have the volume + and - working fine. The mode button at the moment turns the system on & off & I don't know that the other 2 are doing at this stage. The instructions are not real clear & I just need some time to sort out what the various functions are & which button(s) they need to be assigned to. I think I have managed to get the radio to Australia rather than USA2 which it seemed to default to. Anyway I have no major complaints with this unit.

Hi Waynus!

I have the digi_options unit and you can listen to radio (or anything) t the same time as using the GPS by keeping the Bottom right button pressed while plying whatever you are listening to until the GPS screen comes up. (I think it is the "Band" button). That is how I can navigate backward and forward between Audio and GPS.

It may work for you??

All the best

Alfred

Hey guys, I'm new to the board. Bought an SX6 from Townsville Toyota a weeks or so ago. Absolutely love it! You guys really do know more than anyone about this car. How many people in Townsville on this board?

Mods to come in the future:

- Auspack or other head unit.

- Pedders depending on what AAMI says about insurance.

- Better Brakes (AAMI again)

- Undercar green lights to match the car.

Does anyone know about brakes and suspension with insurance?

- Adam.

Hi Adam!

I am from Cairns and have been to Townsville a few times in this great car!

This Forum is GREAT. The advise received here enabled me to do a lot of things to my car I never thought possible!

1) Installed reversing sensors

2) Installed Head Unit (digi_options)

3) Installed reversing Camera

4) Installed Garage Door opener in dash

Learned about car detailing (Never even knew what "claying" is yet the result is AMAZING)

There are a lot of people who deserve special mention but the one I would really like to mention here is Darryl (DJKOR).

His knowledge about everything AURION is just astounding only matched by his willingness to help and share this wealth of knowledge!

If you ever make your way to Cairns feel free to drop in for a cuppa! In the meantime if you have questions feel free to contact me.

Regards

Alfred

:clap: :clap: :clap:

Totally agree he does deserve his own thread, it would be the most popular one here :P

Hi!

You are soooo right.

I will do my "Thank you" thread but I want to take some pictures first!

I am very happy with the way it turned out. I do think itis much more than an ATX now.

I may have to follow Au3ion example of debadging my car after all!

Kind Regards

Alfred

sh!t i do apologize.

I thought this was Justin Eanon thread again!!

Apology accepted...but what is a "Justin Eanon thread"???

Regards

Alfred

Not bagging the product but you do know alfred is a spam bot/person???

And what gives you that impression Brad?

I personally don't think he is a bot. He communicates with us just like a normal person would... for example:

DJKOR!!!!!

You are amazing!

Thank you, Thank you, Thank you!

I was not even gone for 20 minutes and you are here to help out already!!!!

No, I do not have fog lights....so I will go ahead and do what you recomended!

Would I get a "spade terminal" (no idea what that looks like) in autopro, auto one, Jaycar?

Regards and THANKS AGAIN!!!!

Alfred

As far as I'm aware, a bot isn't that appreciative. On top of that, he even used my name in one of his posts:

Wow!

Darryl you are amazing! Of course I know what a spade terminal is, just did not know the name..(I am Austrian)! I will go ahead and install this now!!!!

Thanks again.................

Alfred

By the way, thanks for the praise Alfred :D

Hi Daryl!

It is well earned praise. I was just thinking of putting together a "Thank You" thread.

was able to

1) Install this unit

2) Install Reversing Sensors

3) Install Reversing Camera

4) Install Garage Door opener

5) Repaint my center console

6) learned about cleaning and cleaning my car (it came up like liquid glass surface)

All this thanks to you and other members on this amazing forum.

I am not sure what a bot is even though I think I know what a spam is (all the stuff I get in my e-mail without asking for it I guess).

As I do not do that I am not sure what caused Brad to come to this conclusion other than that I do like this product as well as this forum which gave me the know how to install it properly.

I thought my post may help others and so give back a little after having received soooooo much!

Once again !

Thanks to you and all the other members who have helped me so much doing all this things. (I have quit a few amazed friends who just can not believe that I was able to do all that...Heheheheh)

Regards

Alfred

This one goes out to Matt or anyone who knows, but i can't seem to find any of the Dig Option units on ebay anymore. is this due to no stock or something else? cheers

Hi!

A friend of mine is also interested in this unit.

I fired an e-mail off and this is what I got.

Quote:

Hey mate,

Thanks for that. We'll hopefully get you sorted with the other unit when I return home from China.

I hope everything else is good.

Matt

e.o.q.

Looks like Matt is in China (maybe getting, inspecting new stock?) Hopfully he may even get better units ????

I hope that helps

Regards

Alfred

Any one else with the Dig_options unit having problems with the Bluetooth?

I have emailed dig_options with this:

Hello,

I am having issues with the bluetooth of this unit. When I make a call out bound it works fine. But when I receive a call inbound I can not hear anyone (this happens on 4 different phones I have tried all different makes and models). Also, after hanging up from an inbound call then some of the buttons on the unit do not respond.

The only way to get functionality back is to switch the unit off then back on again.

Is there a way to fix this?

Thanks,

Jeff

Hi Jeff!

Sounds like a faulty unit?! Mine still works perfect incoming or outgoing.

Once on the call all audio stops but the moment the call ends the sounds come back.

Have you had it working previously?

Hope you can get this sorted.

Regards

Alfred

Just ordered mine (Waiting for payment details)

Have to say dealing with Matt is brilliant, can't wait to get my hands on the unit as this has been on my list of things to do since I found out the Auspak units existed and these seem even better.

Hi Wulfkind!

Great to see that this topic was of interest to quit a lot of people!

I am still very pleased with this unit!

I was looking into some of the "Carputer" option as dicussed in this thread and even though they seem to be some great units out there they all seem to be very expensive. Looks like from a "Benefit vs Cost" point of view this is still a solid purchase.

I hope you will enjoy it as much as I have!

Kind Regards

Alfred

I just purchased a dig_options unit.

I hope it arrives soon.. Im excited.

I had it now for a couple of month and I still love it!

I am sure you will too!

All the best

Alfred

Thanks for the suggestion Alfred Q. Definitely something that one can consider.

In my own opinion though, if the rattle has gone away from a standard oil/filter change, then I don't really see the need to put any additives into the oil. Maybe it's my own mentality of "if it's not broke, then don't fix it". I probably would look into it though if I found the rattle still continued after the oil change. It's just for me, I don't like the idea of an engine oil additive when a problem is no longer present.

That said, when it comes to oil additives, I trust Lucas products. If anyone does get a rattle that doesn't go away in the Aurion, it would be interesting to see how this ROIL stuff works. After watching the video, it nearly looks too good to be true. I wonder why we don't seem to hear much about it.

You are quite welcome!

I know exactly what you mean with being very conservative with additives. A friend of mine stuffed his engine up by putting some "Teflon" coating stuff in there.

If you ever decide to use it let me know the difference as you have done some torque testing previously? Would be cool if you have it on paper so as to be able to compare it......yes, I am also very skeptical. (at least I used to be, now I am very happy with my decision to put it in)

I did find some independent research done by the Queensland University of Technology that may be of interest to you though

(it was based on the previous product though, the new one is considered to be even better so it is OK)

If anybody is considering using it, feel free to drop me a line and I can show you how to get your hands on it.

I hope your car is OK after the service!

Regards

Alfred

My oh so perfect Aurion has now developed this cold start up rattle. Previously I would only experience it like once every few months, but now nearly every third time I start the engine when cold, I get a rattle. Best way to describe it is like a marble in a corrugated tin can.

I'm going to have my 75,000km service tomorrow and I really hope it's just something like David said above:

My TRD would start to get a rattle when it was due for a service.

Hi !

I had a similar problem (previous car).

Before I explain what helped me, I have to put a disclaimer in here.

1) I am ABSOLUTLY a noob when it comes to mechanical stuff (that is why I am so grateful to DJKOR for his advise)

2) This is my mechanics advise and opinion only (but it worked for me)

3) it mentions a product being sold by a Network Marketing Company (so if this is deemed out of line please feel free to delete)

Now to my experience:

My mechanic told me this knocking on start up is usually caused by the engine turning over while the oil has not started lubricating yet( as the engine stops, so does the oil pump, over time the oil film begins to settle, as the oil pump needs the engine running it becomes a catch 22 situation, you need lubrication to start the engine but to get it you must start the engine...I hope this makes sense...it took me a little while to get it but I have a patient mechanic)

Therefor the most damage to an engine occurs in the first few seconds after each cold start.

Another source of "Knocking" is condensation. As the engine cools , condensation forms and "thins " the oil. (that can also contribute to difficult starts)

He recommended "ROIL Gold" (back than) now ROIL Platinum (here is some info on U-tube)

http://www.youtube.com/watch?v=ZiB5fh7PztA

I noticed several things

1) no more knocking

2) smoother engine running (it also runs a bit "cooler")

3) more power (it feels more responsive)

4) about 10-15% less fuel conumtion (have not tested it on the AURION though, my last car was a FORD)

Before I forget, he told me not to put it into the engine below 10 000km as it also hardens the metal components (less wear but stops it from running in properly, after that less wear is a good thing though)

I actually became a member as you can not purchase it from stores......

I hope this is helpful but if you feel it is out of line, feel free to get rid of it!

Kind Regards

Alfred

looks great, maybe you can make a little video like djkor did on his unit?

to see what its like, would be great!

Hi ApBPaul!

I am pretty hopeless when it comes to making videos and especialy uploading them.

I will try to get something done but it may be a few days.

After looking at DJKOR's video again I can tell you that they are ery much the same (the only thing I did not notice was the delay on using the bluetooth function and the "forget the last position" problem)

If you need pictures though, I can help you with them for sure!

Regards

Alfred

the factory unit is nice, but having to spend $$$ to get new maps when they're released (which is not very frequent), or around $500 just to plug my ipod in for the adapter, as well as many other limitations of the factory unit have me thinking for something different. It's a very nice unit from the factory don't get me wrong, but it just doesn't compare to even the most basic aftermarket unit in terms of features.

As far as GUI goes it's all down to personal preference, I doubt there is much of difference functionality wise between all these units.

You're definitely right about dealing with Aussie sellers in terms of supporting locals and warranty, I find though with alot of new products, they tend to first appear on Ebay from a chinese seller, and then shortly lately you'll find local sellers stocking it.

Hi Steven!

Interesting what you have to say about the factory unit (I have the ATX). If you read this thread you can see that there are quit a few sattisfied people around. I agree with your assesment on how e-bay works, as a matter of fact the DIG OPTION unit is a chinese unit as well.

Keep us posted of which unit you decide on and leave some fedback!

Kind Regards

Alfred

New unit spotted on Ebay, seems to have a very nice GUI, and all the usual features to boot, good price around $550 delivered.

http://cgi.ebay.com.au/TOYOTA-CAMRY-AURION...id=p3286.c0.m14

Im seriously considering selling my factory satnav unit and changing to one of these, as the only thing holding me back before was the somewhat cheap looking GUI all the other aftermarket units seem to have. Anyone seen or used this particular type before?

Hi Steven!

Looks like a neat unit, but why would you replace the factory one though? What feature is it you are after?

If you like a nice interface, have a look at the pictures in the first post. I posted them a little while ago as an alternativ for people to the Auspack unit (There is a great write up from DJKOR about that one, VERY HELPFUL)! I liked this one because of 3 reasons

1) Great looking interface (nicer than the one you found IN MY OPINION ONLY)

2) Great Price

3) Australian company with great service!

Good luck with whatever decision you make and if you need further feedback let me know!

Regards

Alfred

thank a lot for your help---I tried everything

You are Welcome!

I take it that this worked for you?

All the best and kind regards

Alfred

How does this unit listen to mp3s from dvd while viewing the navigation screen--I've tried every way but can't get it to do this

Any help would be appreciated

Hi kooldude!

You have to keep the right bottom button pressed until the screen switches to the Navscreen. I believe it is the "Band" button.

You will continue to hear the sound of whatever you where listening to. The only time you will loose your sound is when the GPS gives instructions or warnings (you can mute that feature though)

Hope this is of help

Regards

Alfred

http://cgi.ebay.com.au/CAR-DVD-RADIO-GPS-2...id=p3286.c0.m14

A hong kong based company selling the auspack unit for $599AUD + Free shipping includes all gps software(igo,tomtom,finean,routee66 etc.). Whoah! Crazy!

Now that sounds like a good deal!

I actually have seen that one when I was doing my research. As a matter of fact I was only a whisker away of going for that one.

The thing that persueded me to stick with DigOption was..

1) The price difference was very little

2) I liked dealing with an Australian company (in case of warranty issues)

3) I prefered the looks of the interface from DIGIOPTIONS better (Personal opinion & taste of course)

Great research!!

Well done and all the best

Alfred

direct link

http://cgi.ebay.com.sg/2007-2008-2009-TOYO...34.c0.m14.l1262

not sure how long it will be at that location

happy surfing!

Thanks for the link!

It looks like a neat unit BUT for almost 3xtimes the cost of the DIGOPTIONS unit I can not see the same "value for money".

For that amount I would probably go for a car PC unit instead. But even than I doubt that the "value for money" equation will be the same.

Keep us posted which option you are going to take and how it works out!

Regards

Alfred

ahhh thanks heaps, and i'm no tech guru so i researched and found that 480x234 is the same as saying 1440x234. just that one takes into acount the group of 3 colours and the other doesnt. hmmm auspack is trying funny games. but thanks anyways Alfred Q, you got me getting more n more excited about this machine.

oo and one last question (hopefully) hehe, the auspack unit's user interface can be modded if you have the smarts, any idea if they run the same sort of processor/firmware as to use the same mod software?

sorry if this is going a little deep but you never know if you never ask and everyone here is so friendly.

thanks again

I am not sure but you could probably fire an e-mail to Matt from DIGOPTIONS to find out.

digoptions@gmail.com

I actualy like the interface the way it is (except the i-pod interface) so I never investigated that aspect of it. I modded the Nav unit heavily with the latest upgrade to the maps and IGO8.

Concerning your follow on mail concerning the bigger screen I am sorry to say I did not find the unit you mentioned BUT I found this one very easy to read and good value for money. The one you mentioned is at least twice as expensive for a slightly bigger screen.....not sure I need it, this one is very easy on the eyes and big enough for me.

I will continue to investigate though.

Ahh, and you are welcome, I am glad this is of help and interest to you!

Kind Regards

Alfred

just curious to know if this system runs a dvd in the background of say the gps or if the radio runs in the background, correct me if im wrong but the auspack unit does this. also what is the screen resolution and pixels? on the website it says hi-res but doesn't give any details?

thanks fellas

Hi There!

If you connect the DVD to the handbreak it will not work when driving, I linked it to the case so it works regardles of the handbrake setting.

Yes, you can run whatever you want in the background and have the Navsystem running in the foreground. It will only take precedence of the sound system if the Navsystem issues a direction or warning. To do that you have to keep the band button pressed for about 1 or 2 seconds.

Screen resolution is 480x234.

Hope this is of assistance!

Regards

Alfred

Just curious, how responsive are these units? I have to admit, I've been holding off on buying an Auspack/one of these purely because I don't want something where I'll touch the screen and something happens 10 second later.

So hows it perform? I really don't want to be fussing over something sluggish while driving.

Hi

Its really a great unit for the price. I bought mine 2 weeks ago and its going good. have not had any problems with it. The touch screen is good or if you wanna call it responsive - I dint realise any delays in the functioning of the unit. USB drive is the qickest one to pick up data after the radio.

if you go buy the unit - Susan's voice is text to speech (TTS) i.e. it says street names. It took some time for me to get it. However, if i look back it was common sense - it says TTS next to her name from where one can select different voices. (duh)

DJKOR - mate, I tried to update the software from the link - but it did not run on the GPS - I tried everything (in my capacity) I even bought a new card - it reads it but does not automatically act like the original one. The original SD car shows 2 folders (GPS LOG and R15 maps for PNA - this has iGo8 folder in it and other data) Let me know what else can i do.

Hi there!

As DJKOR mentioned already. The sys.txt file is looking for this

[folders]

app="%SDCARD%/iGO8"

If you have a different folder or name you must change this accordingly!

All the best

Alfred

need to get used to the new GPS software as was used to TomTom.

You could probably get TomTom wince edition. I use TomTom on my phone and love it.

How? If you could provide with step by step instructions - it would be excellent. However, as I have not used the pre-installed one properly yet - so do not know which one is actually better. What do you think? or can we have both?

Hi there!

I would assume you could simply load the TOM TOM software on another micro card (this unit supports 8GB cards) and simply swap them around.

Make sure you back up all the origeanl data if you want to use the same card (I would simply buy another card just to be on the save side)

Regards

Alfred