Its_Jay

Thanks heaps mick I'll keep that in mind mark

Hey, ive lost my current celica due to an accident (old lady pulled out in frontof me whilst i was on a roundabout) :( and was looking for a new one i had a 1990 Celica SX with $$$ lots spent on it, (water pump, high pressure pwr steering hose, new timing belt and timing gear, reco pwr steering pump, wheel bearings, reco gearbox, custom intake, g4 coilovers) and ive come across a 97 model i dont know much about the 6th gens but the better engine would the coil overs swap straight in or not? what im asking is do they have the same bolt patterns for suspension? any help would be great.. :)

Aw true? what problems have caused you hell with them mate? and oh tru, does he want to sell one? hahahaha

Yeah, it would be i dont think it is the engine runs quite well just thought i might get a test done jus to be safe then sorry

Yeah will do thanks mate! as its done near 300000kms i think it would be ideal to check. if a cylinder is out, it will need new pistons? or.. and is it best to do all 4 cylinders with new pistons or just the one that needs it. in my head it sounds smart to do all 4. haha

Gday, if anyone knows what the compression of each cylinder of a 1990 celica SX (5sfe) would be great, my car is 293 xxxkms and i think it may be out on compression does anyone know any ways to tell by driving if the car may have loss of compression? any help would be sick :)

Want to buy for 1990 Celica SX near new 4-1 extractors near new 2 1/4 inch exhast system CAI possibly used 1994-99 5sfe engine coilovers/ aftermarket springs and if anyone has a rear sway bar and/or strut brace that will fit 1990 celica SX i dont have much money as im trying to get my car fixed up read my post about my car if you dont understand long story short was ripped off, wasnt the car the guy said it was. so i dont have alot of cash left spent alot on repairs, so thought id jump on here see if someone could offer me these for cheap if they have them lying around so just throw some prices at me if you do Much apreciated. :)

Yeah thanks i got it :) seemed to be glued in :/

Hey guys just wondering, on the 1990 celica SX is there a little clip that holds the side blinkers into place or? Thanks

Yeah, i need a new subfan relay but not paying 25$ from toyota for one. haha yeah i loove the car but it has to go. Ive fixed it! but i cant afford for anything else to go wrong so im going to get rid of it. :( i shall use the money to invest in a new one tho call me stupid but idc :)

thnx mate, ive decided im not selling it, il fix it, i need a few things steering rack pre sure ive got one now tho new throttle cable, new leads and spark plugs new distributor and 2 fuses one for the ABS and one for the 'sub fan' no idea what tht is ay help would be great on prices and performance wise?

Ok hey, my current celica may need a steering rack done ive ran thicker fluid through but who knows how long it could hold for, im thinking of cutting my loses and purchasing a new one after selling this one, now im sure no one here would want to buy it but if ur interested, i have many reciepts for work and repairs its a great car i just dont have the cash to replace a steering rack any legit offers considered, But i would like a new celica, preferably one with less then 280 thousand Ks, and running well has no problems, or may have a rebuilt engine 1992 SX up wouldnt mind a quad light one :) if anyone is selling one id love to have a look and is close buy obvs, im from Newcastle so please let me know, another question where could i find a celica with a 3Sge i heard they came out with them standard Please anyone that can help :) would be great.

I can confirm from experience that these cars are not limited in any gear (other than the 6300rpm normal rev limit) okay well tht solves tht questions thnx heaps :) also the redline is at 6150. what happened when yu pushed it to the 6300? because ive pushed it to 5900 and by then the engine is screaming along haha It screams and does not make any power. There is NO point in going over 5400rpm as they stop making power after that. yeah thought as much :) nah i limit it to about 5500 at best. ive discovered myself it stop pulling at about 5500 or there abouts :)

I can confirm from experience that these cars are not limited in any gear (other than the 6300rpm normal rev limit) okay well tht solves tht questions thnx heaps :) also the redline is at 6150. what happened when yu pushed it to the 6300? because ive pushed it to 5900 and by then the engine is screaming along haha also whats the top speed like just out of curiosity. as im only an L plater. the fastest ive driven it was 115 i think and figured from the tacho and gear itd pull maybe 180-200 flat out. but ehh top speeds a nothing thing. im more for the corners :)

I can confirm from experience that these cars are not limited in any gear (other than the 6300rpm normal rev limit) okay well tht solves tht questions thnx heaps :) also the redline is at 6150. what happened when yu pushed it to the 6300? because ive pushed it to 5900 and by then the engine is screaming along haha

they are limited to 6300 RPM, the 5SFE (engine in your car) will NOT rev much over this without causing significant damage. The rev limit is there for a reason, while possible to remove it with an aftermarket ECU, this would be a VERY VERY bad idea. so they dont valve bounce until 6300 or what happens personally i dont push my car over 5500 as 5400 is where the peak power is at. but dude youve been a great help thnx (: tho there not limited in terms of power like in the states.

ive read that in some countries they are speed/rev limited to 4grand in 5th gear or somthing this means there limited in terms of power. i researched but cant find anything on if they are in Aus or not i was just wondering is that id like to get the most out of this car and if its limited would this affect acceleration and what not. like i know where it redlines is revlimited to protect th engine ive been reading things about it limited to beofre the redline.

Hey uhh just a quick question are the Australian 1990 Celica SX's Rev limited? and if so how would i remove it? would i buy an aftermarket ECU and how much and where would i get one cheers guys.

Alright thats what im on here for :) thanks and my opinion is for a first car its great, seems to handle tight. not so good for stright out speed like just under 60 in 1st at 6000rpm. (NEVER PUSH MY CAR TO REDLINE) then 95 at second. its not too bad. alot of room in the boot for a small car gear box is nice in them i havnt driven alot of cars to compare it to but all toyotas are very reliable but overall its a great car designed for corners :) whats yours like :)

also with the RWD conversion i knew it would be dumb and far out of my league. i was just curious. lol

Yeah the guy was a slack selling it to a person who i said has limited funds and a first car. also the blue slip guy was a mate of his, we are gathering reciepts and written statements from mechanics and putting him to the RTA and hopefully hel be slapped in NSW with a 25k fine and a loss of licence to blue slip. you sure do never look back alright thanks mate very much appreciate your input (: il make sure i tell the mechanic. as i dont have a timing gun. i read that 15-16deg BTDC is perfect for the celica. 10s factory below is retard and what not. yeah you are probably right, il do that first if not. il get the ijnectors checked. as for the 98 octane nothing less goes in it haha. what would you recomend for head, and diameter/type of exhast and i was told that 4-2-1 is good. as for intake to the bumper sort? and yes tried the injector cleaner finished the bottle today actually. Thanks again mate!!!

Ok, so thios is my first proper topic/post/thread whatever you would like to call it. as you can see i only joined today, and yes im 17 yes i dont even have my Ps yet and yes im a newbi but would appreciate some help and or suggestions! So last september, i bought my car a 1990 toyota celica SX from a private sale 40 mins from where i live. the add stated it had no RWC but could pass blue slip easily also said it had log books and service records and reciepts for re balanced crank and a reconditioned engine. also had replced all engoine mounts new timing belt. He spun the 3rd bearing in the gearbox in 3rd gear he had that done and receipts for it. went down to see it nice looking car NO rust at all NONE now i live on the coast so tht was odd looked after i thought. had scratches on the front bumper and what not a chip on the light and a few dings nothing major. he wanted 1700 dollers no less i said fine il pay you 1700 if you can supply a blue slip he aid thats fine. soo the next week i went down to pick it up he couldnt find any recpeits. nor service manuals. Also found out he re did the crank himself. and a gearbox place did the gearbox and clutch soo i rang them to verify they said yes we remeber the car. So on that note i wrote a reciept out that made clear this car should majke me homee and have no unblance in the crank if so a full refund was to be given he agreed i thought happy days. THIT however began a 3 month stretch of mnay problems. Firstly i i notic its pulling a nit to the left and slowly gets worse along the way home no unbalance in the crank tho even up to and over 4500 rpm soo i decided to take it to my mechanic who had a look over it when i returned he said the guy who blueslipedd it COULD NOT have had it on a hoist the was fluid dripping and gushing out everywhere The sterring rack leaked badly, the was an oil leak that had ROTTED the uppercontrol arm bushes on the left hand side they were not there at all. there was a stripped wheel nut that i failed to notice dont know how as i was inspecting the break rotors. there was a cracked bottom engine mount. there wheels where out of allingment, the rear sway bar was BROKEN and barely held by a crappy weld job he tried to ( welding does not stick to that sort of tensile metal) there was a major exhast leak from the head stud. the water pump was spewing out water the radiotora was cracked many of these an instant FAIL on a blue slip. Me being a silly 17 year old thought 1700 dollers blue slip GREAT car dont get me wrong it had a immaculate body excluding the dings up front but no rust straight. so after 2300$ its actualy roadworthy now. and will pass a pinkslip the exhast will need to be replaced before the pinkslip however the sterring rack on the other hand we ran thicker fluid through as it was only 200$ as apposed to 1700 for a new rack. As im out of money pretty much and have spent too much i would like to sell it and buy a 1993 celica but i dont think id get much for my current one. and its hard to find spare parts or a new 5sfe engine with low Ks and is cheap/free. my mechanic did a great job if your from newcastle hit up belvue motors in sandgate hes a top bloke. there are a few more problems tho i would like some help with, before the car went in the mechanic to be repaired it had alot of power below 3500 rpm very quick off the mark ever since he redid the timing belt (again needed doing) its been very sluggish and sloppy below 3500 like ul put ur foot down a little and itl rev then lurch then somewhat die then lurch again til it reaches 3500 rpm and thn all of a sudden take off. te only thing i can think off is timing maybe it was set to advanced before then after it was set to factoy i thought it was set to low retarded a little. got him to recheack he tells me it has good vaccum and is perfect. maybe needs to be set to advanced, also i read that ignition via the distributor cap method timing may be the cause im not sure if there the same thing tho. a mate said it may be injectors. as his pop had the same problem his injectors where in need of being replaced soo any help would be much apprecitated. its done 293000kms another thing. being on my Ps there not much i can do in terms of performance what are some cheap things i could do to improve handling and performance if you could post links would be great or some tips (: also would i be able to do a engine swap to a 3sge because ive read celica came out with tht engine would the mountings match up and would it be a stright swap? or would be very lenghty process would this be legal for a P plater? anyother tips i should know would be great or anyone that would like to help please no comments telling me how silly/ stupid this buy was no one could tell me other wise i wanted tht car, i know how stupid it was and regret it very much but i made a choice il live with it even if it does cost me a lot a of money that i dont have. alos dumb question but whats the easiest cheapest way to do a rwd conversion just for my own interest.

Thanks dude (: always up to learn some new stuff (:

Hey guys im a new member im only 17 im from newcastle i drive a (*****) celica it has many problems but owell. just thought id say hey (: i drive a 1990 Celica SX 5sfe engine. i know a little. but always keen to learn more anyone tht knows alot about them and tuning. give us a yell :)

Hey guys im a new member im only 17 im from newcastle i drive a (*****) celica it has many problems but owell. just thought id say hey (: i drive a 1990 Celica SX 5sfe engine. i know a little. but always keen to learn more anyone tht knows alot about them and tuning. give us a yell :)