Jump to content

zendainc

Regular Member
  • Posts

    10
  • Joined

  • Last visited

Everything posted by zendainc

  1. Thanks, that's exactly what I'm looking for.
  2. Hey guys, Was having a look under the bonnet when I noticed that I'm missing a hose off of what I believe to be part of the air intake. I have had a look through the workshop manuals but can't seem to find where it should be connected to, and their doesn't seem to be a hose dangling down anywhere. Is anyone able to advise where/what this should be hooked up to? Pictures attached.
  3. Hi Folks, just chasing a little advice. I've had problems in the past with kicking out the plug which runs into my servo. Usually this means I'll only be able to get Arctic air until I plug it back in. Eventually I broke a pin off and had to do some fiddling around with it to fix it up. However it appears that I was a little careless while trying to pull the servo motor out to work on it and have done something to the gears. When I start the car I just hear the aircon making a knocking sound, as if the gears which the servo connects to are misaligned. Any advice for fixing this up or removing the servo motor to get better access?
  4. AGE: 22 SEX: Male STATUS: Single when I bought it, currently taken. REASONS FOR BUYING: At the time I was looking for something fast, and stylish. I'd previously driven a Falcon and had bad experiences with it. My experience with my Hilux taught me that Toyota's are damn near indestructible. Test drove a Touring before finally settling on an SX6. Have never looked back due to the surprisingly good fuel economy and comfort of the car. I've had a few problems here and there but over all its been a great car. Even made it through a few fender benders without too much damage.
  5. The AUX jack in this guide was put in as part of the mod I believe. You can also do what some of us have done and trail a cord out the side of the trim as well. I'm thinking of putting in the work to change mine over to a jack though. Means I can use a longer or shorter cable if required etc.
  6. Thanks for the guide, worked great for me. I was able to put together the wiring for it install it. Sounds great and saved me using a grainy FM transmitter.
  7. Thanks for all of your replies guys. It's definitely given me a few options and I appreciate the advice :)
  8. I'm in Central Queensland, but it could be worth looking into getting him to take a look when I'm down Brisbane way next. Might take a look around the local wreckers as well. Haven't been there since back when I had a Falcon.
  9. Yeah it's pretty dusty. I was careful when I pulled the head unit out, but I wasn't careful of the metal frame underneath when I was checking out the plugs on the back. Carelessness on my part really.
  10. Hi Folks, I've got a 2008 Aurion SX6 and I accidentally caused a little damage to the dash while working on the head unit. Toyota have quoted me $730 for a new panel to replace it, however I'm wondering if anyone knows of a way to repair it. Another alternative would be to buy a non genuine part I guess. If anyone has any suggestions of a good dealer?
×
×
  • Create New...

Forums


News


Membership