Jump to content

Gearbox swap

Jaym

By Jaym
in Yaris / Echo Club

 Share

Recommended Posts

Jaym Collaborator

Jaym

Posted
Posted

A fair few guys will be familiar with what im going to discuss here from my previous posts..

My gearbox is leaking oil ( 5 SP Man ). After many opinions on what it could be seems the most popular is input shaft seal. However alot of mech's / enthusiasts have said very unusual for the seal to be leaking..

One mechanic inspected the gearbox and found a chunk taken off one of the fins on the underside of the gearbox, meaning it had been hit by something or even mounted a kerb. I had a look myself and it did not quite appear like the damage was reflected on such a collision ( mounting a kerb ) but there was damage to the fin. said you may fix the seal and it may still leak.. he recommended a reconditioned gearbox.

Can anyone suggest anything on this.. Im starting to pull my hair out!!!!!!!!

Link to comment
Share on other sites
Jaym Collaborator

Jaym

Posted
  • Author
Posted

A fair few guys will be familiar with what im going to discuss here from my previous posts..

My gearbox is leaking oil ( 5 SP Man ). After many opinions on what it could be seems the most popular is input shaft seal. However alot of mech's / enthusiasts have said very unusual for the seal to be leaking..

One mechanic inspected the gearbox and found a chunk taken off one of the fins on the underside of the gearbox, meaning it had been hit by something or even mounted a kerb. I had a look myself and it did not quite appear like the damage was reflected on such a collision ( mounting a kerb ) but there was damage to the fin. said you may fix the seal and it may still leak.. he recommended a reconditioned gearbox.

Can anyone suggest anything on this.. Im starting to pull my hair out!!!!!!!!

I spoke to JAP WORLD SPARES in tempe sydney and they have a reconditioned 5 sp man gearbox out of a 99 Echo.. not a sportivo for 500$

Link to comment
Share on other sites
Guest

Guest

Posted
Posted

A fair few guys will be familiar with what im going to discuss here from my previous posts..

My gearbox is leaking oil ( 5 SP Man ). After many opinions on what it could be seems the most popular is input shaft seal. However alot of mech's / enthusiasts have said very unusual for the seal to be leaking..

One mechanic inspected the gearbox and found a chunk taken off one of the fins on the underside of the gearbox, meaning it had been hit by something or even mounted a kerb. I had a look myself and it did not quite appear like the damage was reflected on such a collision ( mounting a kerb ) but there was damage to the fin. said you may fix the seal and it may still leak.. he recommended a reconditioned gearbox.

Can anyone suggest anything on this.. Im starting to pull my hair out!!!!!!!!

I spoke to JAP WORLD SPARES in tempe sydney and they have a reconditioned 5 sp man gearbox out of a 99 Echo.. not a sportivo for 500$

The gearbox in the 1.3 is diff to the 1.5

but with that said, if there is nothing wrong with your existing box (e.g not grinding, making noise, etc), why replace it?

IMO just take the car to a gearbox specialist and get it looked at.

Link to comment
Share on other sites
Jaym Collaborator

Jaym

Posted
  • Author
Posted

A fair few guys will be familiar with what im going to discuss here from my previous posts..

My gearbox is leaking oil ( 5 SP Man ). After many opinions on what it could be seems the most popular is input shaft seal. However alot of mech's / enthusiasts have said very unusual for the seal to be leaking..

One mechanic inspected the gearbox and found a chunk taken off one of the fins on the underside of the gearbox, meaning it had been hit by something or even mounted a kerb. I had a look myself and it did not quite appear like the damage was reflected on such a collision ( mounting a kerb ) but there was damage to the fin. said you may fix the seal and it may still leak.. he recommended a reconditioned gearbox.

Can anyone suggest anything on this.. Im starting to pull my hair out!!!!!!!!

I spoke to JAP WORLD SPARES in tempe sydney and they have a reconditioned 5 sp man gearbox out of a 99 Echo.. not a sportivo for 500$

The gearbox in the 1.3 is diff to the 1.5

but with that said, if there is nothing wrong with your existing box (e.g not grinding, making noise, etc), why replace it?

IMO just take the car to a gearbox specialist and get it looked at

Wont this be an expensive exercise.. They wil need to strip it down

Link to comment
Share on other sites

Guest

Guest

Posted
Posted

Wont this be an expensive exercise.. They wil need to strip it down??

Probably not to find a leak, if its even coming from the gearbox.

and besides, this way you KNOW the gearbox is in good condition, you arent taking a gamble on a used box.

Link to comment
Share on other sites
Jaym Collaborator

Jaym

Posted
  • Author
Posted (edited)

Wont this be an expensive exercise.. They wil need to strip it down??

Probably not to find a leak, if its even coming from the gearbox.

and besides, this way you KNOW the gearbox is in good condition, you arent taking a gamble on a used box.

Well its Definately thin clear transmission oil pooling at the lower mounting bolts..

ive had it looked at several times, and its not coming from the driveshaft seals.

it couldnt possibly be leaking from anywhere bar from within the bellhousing of the box..

Once it leaks from within side the bell housing.. it pools in the bottom and leaks down

Edited by Jaym
Link to comment
Share on other sites
Jaym Collaborator

Jaym

Posted
  • Author
Posted

A fair few guys will be familiar with what im going to discuss here from my previous posts..

My gearbox is leaking oil ( 5 SP Man ). After many opinions on what it could be seems the most popular is input shaft seal. However alot of mech's / enthusiasts have said very unusual for the seal to be leaking..

One mechanic inspected the gearbox and found a chunk taken off one of the fins on the underside of the gearbox, meaning it had been hit by something or even mounted a kerb. I had a look myself and it did not quite appear like the damage was reflected on such a collision ( mounting a kerb ) but there was damage to the fin. said you may fix the seal and it may still leak.. he recommended a reconditioned gearbox.

Can anyone suggest anything on this.. Im starting to pull my hair out!!!!!!!!

I spoke to JAP WORLD SPARES in tempe sydney and they have a reconditioned 5 sp man gearbox out of a 99 Echo.. not a sportivo for 500$

The gearbox in the 1.3 is diff to the 1.5

but with that said, if there is nothing wrong with your existing box (e.g not grinding, making noise, etc), why replace it?

IMO just take the car to a gearbox specialist and get it looked at.

The gearbox in the 1.3 & 1.5 Manuals are the same

Link to comment
Share on other sites
Guest

Guest

Posted
Posted

A fair few guys will be familiar with what im going to discuss here from my previous posts..

My gearbox is leaking oil ( 5 SP Man ). After many opinions on what it could be seems the most popular is input shaft seal. However alot of mech's / enthusiasts have said very unusual for the seal to be leaking..

One mechanic inspected the gearbox and found a chunk taken off one of the fins on the underside of the gearbox, meaning it had been hit by something or even mounted a kerb. I had a look myself and it did not quite appear like the damage was reflected on such a collision ( mounting a kerb ) but there was damage to the fin. said you may fix the seal and it may still leak.. he recommended a reconditioned gearbox.

Can anyone suggest anything on this.. Im starting to pull my hair out!!!!!!!!

I spoke to JAP WORLD SPARES in tempe sydney and they have a reconditioned 5 sp man gearbox out of a 99 Echo.. not a sportivo for 500$

The gearbox in the 1.3 is diff to the 1.5

but with that said, if there is nothing wrong with your existing box (e.g not grinding, making noise, etc), why replace it?

IMO just take the car to a gearbox specialist and get it looked at.

The gearbox in the 1.3 & 1.5 Manuals are the same

Are you sure, they are definitely different in the yaris.

Link to comment
Share on other sites
Jaym Collaborator

Jaym

Posted
  • Author
Posted

A fair few guys will be familiar with what im going to discuss here from my previous posts..

My gearbox is leaking oil ( 5 SP Man ). After many opinions on what it could be seems the most popular is input shaft seal. However alot of mech's / enthusiasts have said very unusual for the seal to be leaking..

One mechanic inspected the gearbox and found a chunk taken off one of the fins on the underside of the gearbox, meaning it had been hit by something or even mounted a kerb. I had a look myself and it did not quite appear like the damage was reflected on such a collision ( mounting a kerb ) but there was damage to the fin. said you may fix the seal and it may still leak.. he recommended a reconditioned gearbox.

Can anyone suggest anything on this.. Im starting to pull my hair out!!!!!!!!

I spoke to JAP WORLD SPARES in tempe sydney and they have a reconditioned 5 sp man gearbox out of a 99 Echo.. not a sportivo for 500$

The gearbox in the 1.3 is diff to the 1.5

but with that said, if there is nothing wrong with your existing box (e.g not grinding, making noise, etc), why replace it?

IMO just take the car to a gearbox specialist and get it looked at.

The gearbox in the 1.3 & 1.5 Manuals are the same

Are you sure, they are definitely different in the yaris.

Yer identical

Link to comment
Share on other sites
  • 2 weeks later...
rob323 Proficient

rob323

Posted
Posted

Probably too late, but I wouldn't spend more than $200 on a second hand box (hell I bought a 1NZFE and a gearbox for $500), and there is no way you can recondition one and sell it for $500 and make a profit. The main bearings and a couple of synchros alone in mine cost $500 and my labour was free.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Wheel size

      Hi everyone, I’ve just bought a nice clean 99 Corolla. I want to put some nice wheels in it, but am unsure as to what size will fit?
      Mark Cuming in Wheels & Tyres
    2. 0

      1zz-fe engine rebuild

      Hello all, Working on my 2002 corolla. It needs a engine rebuild due to burning oil out the back. It has over 400,000 km on it and I havent looked after it. Everything is still original on the motor. The only thing that I have replaced, was the brushes on the alternator. They were completely worn out. I am pulling the motor/gearbox out of the car. Wont know the condition of the block or head until I strip it down. I know the design of the piston where changed in the 2003+ models for more oil holes, which stopped the buring of oil. 1. Was there any other changes made ? 2. Does anyone know of where I can get a engine rebuild kit for 1zz-fe motor in australia ? 3. I have only found one place that I can get a new short motor built but that is in the USA and they do ship to australia but was hoping to find something in australia Thanks for help. Dragon
      DragonNight in Corolla / Corolla Sportivo Club
    3. 14

      Rough cost of replacement bumper?

      Hey mate, Any chance youve got a part number/price or info on an alternative for the bottom half of a trd aurion front bumper? Thx, Rob
      robtrd in Aurion / TRD Aurion Club
    4. 0

      2007 Corolla Sedan rear seatbelt question

      Hi everyone, new member here. I've got a small problem which I'm hoping you can help me sort out. I've read the "read me first" thread and done a forum search so apologies if this ends up being a repost. Ok, so I've just has a bloody mouse chew through the rear seat and half (but only half) of every rear seatbelt. Which is nice. So I need to replace them. The problem I appear to have is that none of the local breakers have any suitable vehicles that I can pull them from and the ones I ordered and was sent from the bay of fleas has the wrong brackets on, despite being allegedly for that vehicle. Further searches come up with every seller showing the wrong bracket, so either I've got a special car which is different just because, or (more likely) they don't know their ****s from their elbows what they're selling. I'm after some aftermarket ones as they never get used and just need to be there to get through rego so don't really want to spend a heap of cash I don't have on genuine parts if I can avoid it. I've replaced the centre one (a mate just randomly had it in a box in his shed, which was handy) but still need the left and right. I've attached the bracket type I pulled from the car and need. Is this a standard generic Toyota seatbelt or specific to the 2007 Corolla sedan? Does is need to be specifically for the rear left and right or do front ones fit? Does anyone know where I can source an aftermarket pair? I will really, really appreciate any help offered with this, I know my way around a box of tools but very little about mechanikicing (which is part of the reason why I bought this car - something simple to learn on as repairs/replacements become due) and this is a simple fix which is turning into a drawn out headache. Thanks - Matt
      MattNSW in Corolla / Corolla Sportivo Club
    5. 0

      Hi from Wagga

      Hi folks, I'm in Wagga, have what I thought was a nice, cheap and reliable 2007 Corolla, and am joining in the hope of picking the collective brain to troubleshoot and avoid tossing my computer and the relevant car parts out of the nearest window. I'll play nice and restrict the swearing to off line areas :D See you on the threads! Cheers Matt
      MattNSW in New Members Introductions
    6. 2

      Amplifier 88650-60D60 no longer made

      Cheers Herb, I've tried all of the UAE, New Zealand wreckers, even Aman with no luck. Very frustrating...
      Wags83 in Landcruiser Club
    7. 2

      Amplifier 88650-60D60 no longer made

      Hi Paul, Try this mob, they seem to have everything. Genuine Japanese Car Part Imports - Amayama Herb
      ozieagle in Landcruiser Club
    8. 2

      Amplifier 88650-60D60 no longer made

      Hi all, Wondering if anyone has had this issue. I recently purchased a 2007 200 series landcruiser, and the amplifier for the air con unit stopped working. Part number 88650-60D60. (Looks like a circuit board) All controls for the air con now do not work, very frustrating in winter when you dont have any way to unfog your windscreen. Toyota have informed me that they no longer produce this part, and there is nothing superseeded to fit in it's place. My question is has anyone had this problem? If so what did you do to fix it? I have got onto an auto sparky who has had a go at fixing the circuit board but its unserviceable. Any feedback would be much appreciated.
      Wags83 in Landcruiser Club
    9. 0

      Engine oil dipstick reading

      Hi guys, Probably a silly question... I'm having trouble reading my engine oil dipstick on my Toyota Hilux 2010 3.0 Turbo Diesel. I have warmed up the engine, turned off for ~10 minutes, parked on a level surface. Pulled out the dipstick, wipe it and insert it back to the bottom and carefully lift it up. I tried so many times and the two sides always look different. I couldn't read it. Maybe I just don't understand how to read it. Could someone help? Thanks a lot!!!
      LYC in Hilux Club
    10. 1

      Landcruiser 13B Engine Swap

      Hi I’m not shore how you went with this project but on a whim how did you go and do you still have the old 13b engine as I have this car and the engine failed looking for options cheers
      Colinarcher in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership