Jump to content

1994 CAMRY runs rough


SoloTech

Recommended Posts

XV10 with 5S-FE engine

Manual trans

Engine runs rough at idle and cannot figure out where to start. Oxygen sensor? Disty?

Have checked all vacuum lines.

Recently replaced the spark plugs, rocker cover gasket and plug seals. Idle issue has been there for some time, even before plugs were replaced.

Any help appreciated.

Thanks.

Link to comment
Share on other sites


Seem to have fixed it by squirting silicone lubricant down into IAC valve. Will see if that fixes it long term.

Thanks for reading this.

Any chance of posting up a video?

Link to comment
Share on other sites

You should get some carny cleaner , light sand paper and some rags.

Spray the carby cleaner into the throttle body and clean thoroughly. Rip up the sanding paper and place it at top of butterfly in throttle body and move the butterfly up and down so that it sands where the butterfly makes contact with the top of the throttle body.repeat on the bottom.

With the IAC put a nozzle on the carby cleaner and spray a good amount where the hole is in front of the butterfly.

That should fix it permanently

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Forums


News


Membership