Jump to content


Brake rotor nut

Justa

By Justa
in Suspension & Brakes

 Share

Recommended Posts

Justa Collaborator

Justa

Posted
  • Author
Posted

I'm removing the brake rotor off the vehicle. the is a nut in the centre of the rotor holding it to the axle. its big I'm guessing bigger then 30 mm.

Link to comment
Share on other sites
Hiro Grand Master

Hiro

Posted
Posted

Photo? Sounds like you're referring to the axle nut, which doesn't hold the rotor to the hub (it holds the axle, hub and wheel bearing together).

Brake rotors usually come off by removing the caliper and then simply pulling the rotor outwards - if it is stuck then there are usually some tapped holes which you can screw a bolt in to that will "jack" the rotor away from the hub (handy if it is all rusty and seized)

Link to comment
Share on other sites

Justa Collaborator

Justa

Posted
  • Author
Posted

Thanks for your help guys. First time pulling off the brake assembly and was struggling to get them off as they have been on there for awhile. I took to it with a hammer and a piece of wood worked a treat.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      New member seeking advice for parts

      Hi guys! I'm Alberto, I just finished importing a HZJ73 from Japan and I love it! The car came without spare wheel holder and it seems discounted so I don't know what do to. Someone knows where I can find it or what else works as replacement? I don't mind if is not oem part as far as it works 😅 I'm based in Brisbane if it makes some kind of difference Pictures attached as reference
      alberto965 in Landcruiser Club
    2. 39

      Pics of my Kluger steering wheel removal

      What are you trying to say Don? _______________________________________________________________ skysmotor.co.uk sells the following products online: ac servo motor, geared stepper motor, stepper motor drivers, planetary gearbox and can be purchased online if required.
      Maria in Kluger Club
    3. 14

      1zz to 2zz

      hey daniboy this is one of those situations where i’m stuck and going through old forums haha currently doing a 2zz swap on my zze122 wagon and i’m having a fuel pump not priming issue, any chance you could respond back 10+ years later
      chrisibrahim in Corolla / Corolla Sportivo Club
    4. 0

      Can I put a 2010 bumper on my 2008 Camry ?

      I have a 2008 Camry altise and recently damaged the front bumper and i'm wondering if I can fit a 2010 sportivo bumper on to replace it. It looks like it fits I know I will need to get new headlights for it to fit but do I need to do any modifications or will all the plastic clips and screws line up ?
      Angus_reynolds11 in Toyota Guides Support Topics
    5. 5

      My Toys & Collectables

      Seinfeld added
      L4WL3SS in Club Lounge
    6. 0

      Anyone else tried these seat covers ?

      these seat covers look pretty good, but I've had bad experience when trying to fit some cheaper ones I bought online - they say custom fit, anyone else tried them ? Would love to know before I buy them, thanks all https://mycustomcar.com.au/
      MacSammy in Landcruiser Club
    7. 1

      Digital Speedometer

      Hi did you figure this one out? I have the same model and been unable to get it digital as well
      TrishB in Kluger Club
    8. 0

      am2 fuse blowing

      Hello, i have a 1996 starlet The problem is when i turn the key the fuse blows, and i have been looking over the wiring and can’t find any shorts or damaged wire. The car would not crank over because of the fise blowing. I found out that if i disconnect the transponder key ecu the fuse is holding, but as soon as i connect the transponder the fuse blows. So i wonder if there is something I can try out? should i just buy a new transponder box or is it something else i could try? and is it not kinda wierd that the box is the problem? I have looked inside the box and cant see any corrosion in the box
      danny98 in Starlet / Sera / Paseo Club
    9. 0

      Toyota Celica '96 5S-FE no spark

      Hi everyone, I have spent too much time on my Celica and even my mechanic is stumped at figuring out the issue so any tips will be appreciated. Here is what has been done, immobiliser disbabled, distributor replaced, igniter replaced, EFI relay replaced, and EFI 15AMP fuse is not blown. I tried jumping E1 and TE1 in the diagnostic port to try and get a code from the CEL but it doesn't light up, I think it might be burned out so I will have to get on that. I am now clueless about what to do next, it could be the ECU but I can't find any pointers too that.
      carsarepain in Celica Club
    10. 0

      Toyota Camry 2003 Driver seat recline issue

      Hi guys, so i just bought a 2003 camry. So something is wrong with the driver seat (manual recline). When i recline it at a certain place it locks in but if you put ur body force the seat tilts back a bit and locks to a different position. Looking help if someone knows whats wrong and how to fix it.
      Rafidmeme in Camry Club
×
×
  • Create New...

Forums

News

Membership