Programming remote instructions - All Models

[hixsta]

Here's an instruction list I found that covers all modern central locking remotes. (up to 2011)

Doesn't include keyless entry remotes.

Models:

Aurion GSV40
Camry ACV40
Kluger MCU28
Prado RZJ/GRJ/KZJ/KDJ
120
Rav 4 ACA33
Tarago ACR50
Tarago GSR50
Yaris NCP 90/91/93

Aurion GSV40
Camry ACV40
Kluger MCU28
Prado RZJ/GRJ/KZJ/KDJ
120
Rav 4 ACA33
Tarago ACR50
Tarago GSR50
Yaris NCP 90/91/93

Avalon MCX10

Camry ACV36

Toyota Remote Instructions.pdf

[hixsta]

Just updating I had success adding a new remote to my GSV40 Aurion bought from Ebay. Only point that the attached instructions is unclear on is:

8. Turn key from off to on - AND BACK TO OFF AGAIN - once to add a remote retaining......

[(mr2)]

What's unclear?

If you are adding a remote and do not want to delete all the existing remotes you only turn the key from OFF, to ON and back to OFF once.

[hixsta]

It doesn't state "back OFF again" like it does in another set of instructions I have. You could turn it once to ON and leave it there, then the programming doesn't work. Just making sure it is clarified for everyone and anyone who reads it, not just for people such as yourself who are obviously good with assumptions.

[(mr2)]

It doesn't state "back OFF again" like it does in another set of instructions I have.

I didn't notice that, sorry.

The company that rewrote those instructions have just reworded the instructions from Toyota, and the Toyota ones aren't the best to follow at the best of times. The Toyota instructions go in to more depth explaining what the LED security light is doing and how to add/ delete remotes and keys.