mrcrazyrolla

Dang! This thing is gonna fly! Long Live The Beast!

When some1 ran across my hood at a party I got andrew from "Dent Doctors" to get all 3 dents out. He was really professional and quite cheap. $80 for an hours work. He runs from caloundra to brisbane. Andrew (Dent Doctor) 0401856096

In the hatch there should be small panels (about the size of an envelope) near your lights, quite easy to pull off. I got my trolly dent situated just behind my fuel tap that way.

Oh Dang! some1 just bought it from underneath me lol! He says he'll make me one once he finishes that one.

Well that changes my mind about Boost events...Might just stick to TOCAU events. If I can ever get a thursday night off you guys will see me at the loop. What time do you guys normally roll up?

Feel free, but providing that, its coprighted LOL :P jks You have to post up your ride, so we can all understand it better lol :P Make a thread already B) Evo Yeah for sure mate. I'm getting my windscreen fixed tomorrow morning, i'll wash it and take some shots. Might even make a few videos of my 3" custom catback and project sound system. Thats my subs << oh yeah :P looks good B) can't wait to see piccies So what have ya decided? Evo Trying to set up a refund system with the seller in Melbourne...he seems like a good guy. http://www.creativebodyworks.com.au/home.php These guys will be installing it for me ^^^^ After all is said and done, its only gonna be a 8 - 900 dollar kit. I can live if i do some damage to it. It might only be a temporary thing know what i mean? I can always remove it...have a good looking ascent again. Plus i'll gain a sexy wall feature :P

Feel free, but providing that, its coprighted LOL :P jks You have to post up your ride, so we can all understand it better lol :P Make a thread already B) Evo Yeah for sure mate. I'm getting my windscreen fixed tomorrow morning, i'll wash it and take some shots. Might even make a few videos of my 3" custom catback and project sound system. Thats my subs <<

Bad quality? Pros and cons of fiberglass rather then...what are genuine body kits made out of? if you run over something with a fibreglass kit, chances are you would need to discard the kit.. the genuine part are made out of ABS plastic.. easier to work with and a lot more durable too.. (Some panel beaters actually wouldnt work with fibreglass) Cheers Kenneth most helpful! Does any1 have any idea how much lower the lips sits then the stock "ascent" :P bar, skirts and bumpers? it is a noticeable difference, you haven't looked through my member's rides thread, have you? all your questions will be answered if you just look :P is yours the pre-facelift or facelift? Well done on getting this bit right ^^^ Evo yeah i've had a really good look...northy accessories makes me cream. The hard part is telling how low it will sit on stockie suspention. With my lame driveway it's either: 50/30mm Kings (50 back, 30 front) with monroe shocks OR Sportivo Body Kit. If I get both, the kit wouldn't last a week. so on stockie springs...if i install the kit...maybe an inch less clearance? 2 inches at the back? Can anyone confirm? FYI I don't have access to a sportivo otherwise i'd just take the lips off and measure :P EDIT: pre-face. made 04/04. We just celebrated her birthday I believe the face-lift started in 06/04? for your info, i have kings Lows all round, and i don't get scrubbing anywhere... the are roughly 30or 35MM, i can't remember lol :P but if you get the 50mm springs in the back... it will just level out your car, not essentially make it much lower... You will be suprised how much it is to put the stivo kit on my car... something that you don't want to know about :o Evo Oh ok thanks evo. It's also the overall ground clearance i'm worried about. I've never scraped the stockie ascent body on my driveway but I often scape my 3" catback (it's cos i got a dump tip) if i'm not thinking about my angle. So as you can tell getting a body kit is a large concern to me :P I appriechiate your time everyone! I'll post some pics of my baby once i get my windscreen fixed (goddamn trucks). Sell the car and just buy a stivo :P unless you have bigger plans for the rolla :D Evo I was thinking about waiting till you finish your S/C 1zz and using it as a draft for mine :P Too bad I have engine restrictions untill Dec. 2011

Bad quality? Pros and cons of fiberglass rather then...what are genuine body kits made out of? if you run over something with a fibreglass kit, chances are you would need to discard the kit.. the genuine part are made out of ABS plastic.. easier to work with and a lot more durable too.. (Some panel beaters actually wouldnt work with fibreglass) Cheers Kenneth most helpful! Does any1 have any idea how much lower the lips sits then the stock "ascent" :P bar, skirts and bumpers? it is a noticeable difference, you haven't looked through my member's rides thread, have you? all your questions will be answered if you just look :P is yours the pre-facelift or facelift? Well done on getting this bit right ^^^ Evo yeah i've had a really good look...northy accessories makes me cream. The hard part is telling how low it will sit on stockie suspention. With my lame driveway it's either: 50/30mm Kings (50 back, 30 front) with monroe shocks OR Sportivo Body Kit. If I get both, the kit wouldn't last a week. so on stockie springs...if i install the kit...maybe an inch less clearance? 2 inches at the back? Can anyone confirm? FYI I don't have access to a sportivo otherwise i'd just take the lips off and measure :P EDIT: pre-face. made 04/04. We just celebrated her birthday I believe the face-lift started in 06/04? for your info, i have kings Lows all round, and i don't get scrubbing anywhere... the are roughly 30or 35MM, i can't remember lol :P but if you get the 50mm springs in the back... it will just level out your car, not essentially make it much lower... You will be suprised how much it is to put the stivo kit on my car... something that you don't want to know about :o Evo Oh ok thanks evo. It's also the overall ground clearance i'm worried about. I've never scraped the stockie ascent body on my driveway but I often scape my 3" catback (it's cos i got a dump tip) if i'm not thinking about my angle. So as you can tell getting a body kit is a large concern to me :P I appriechiate your time everyone! I'll post some pics of my baby once i get my windscreen fixed (goddamn trucks).

Bad quality? Pros and cons of fiberglass rather then...what are genuine body kits made out of? if you run over something with a fibreglass kit, chances are you would need to discard the kit.. the genuine part are made out of ABS plastic.. easier to work with and a lot more durable too.. (Some panel beaters actually wouldnt work with fibreglass) Cheers Kenneth most helpful! Does any1 have any idea how much lower the lips sits then the stock "ascent" :P bar, skirts and bumpers? it is a noticeable difference, you haven't looked through my member's rides thread, have you? all your questions will be answered if you just look :P is yours the pre-facelift or facelift? Well done on getting this bit right ^^^ Evo yeah i've had a really good look...northy accessories makes me cream. The hard part is telling how low it will sit on stockie suspention. With my lame driveway it's either: 50/30mm Kings (50 back, 30 front) with monroe shocks OR Sportivo Body Kit. If I get both, the kit wouldn't last a week. so on stockie springs...if i install the kit...maybe an inch less clearance? 2 inches at the back? Can anyone confirm? FYI I don't have access to a sportivo otherwise i'd just take the lips off and measure :P EDIT: pre-face. made 04/04. We just celebrated her birthday I believe the face-lift started in 06/04?

Bad quality? Pros and cons of fiberglass rather then...what are genuine body kits made out of? if you run over something with a fibreglass kit, chances are you would need to discard the kit.. the genuine part are made out of ABS plastic.. easier to work with and a lot more durable too.. (Some panel beaters actually wouldnt work with fibreglass) Cheers Kenneth most helpful! Does any1 have any idea how much lower the lips sits then the stock "ascent" :P bar, skirts and bumpers?

Bad quality? Pros and cons of fiberglass rather then...what are genuine body kits made out of?

If that is the path you want to take, i say do it :P i have worked out how much i put into my car... and its more then what you got quoted :P but i am HAPPY :D that is cheap for the price... but check first to see if it isn't a scam :o Evo Yeah that's right you put a sportivo kit on your accent aswell...was it a full lip kit? How much did it cost ya? From where? Any problems? cheers -Azza

Sup Guys. I'm trying to get a sportivo body kit for my pre-face '04 ascent. I found this on ebay. http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...E:X:RTQ:AU:1123 Wtf? a front lip? doesn't the sportivo front bar replace the ascent one? $400 for the full kit + $380 for painting (Cascade blue, factory) + $120 for freight. I can install my self quite easily. What do ya think? FYI, I was quoted $2,750 for the full Sportivo Kit (including spoiler + installation) from my local toyota dealers. Cheers, -Azza

Looking good mate....really sexy. -Azza

Hey Evo. If anyone changes their mind or finds them selves short on cash i'll be happy to take a blue set off your hands. I'll deposit cost + shipping to the sunshine coast into your bank. Cheers. -MrCrazyRolla