ope126

Not sure if they are on your vehicles, however on mine I have three (3) orange warning labels. 1) owner's manual 2) engine bay 3) glovebox Basically a warning label to say that it will / may result in non-compliance with ADR 69/00 Frontal Impact Requirements.

GSU40R 2wd. GSU45R 4wd. Simple as that... Check the VIN numbers.

Evana, great to hear that you have them on and are going well...

Some Additional info; Dash Tweeters / Midrange: 2.5" Front Door: 6" x 9" Rear Door: 6.5" Something like this would be required to replace the speakers brackets / holders also; http://cgi.ebay.com/ebaymotors/6x9-Speaker-Brackets-Toyota-Highlander-08-09-Front-_W0QQcmdZViewItemQQhashZitem483a7bb9a1QQitemZ310218832289QQptZCarQ5fAudioQ5fVideo And this for good measure; http://www.dynamat.com/products_car_audio_door_kit.html

Hi All, The following has got me thinking about upgrading the OEM system in the Klger; http://www.jbltoyota.com/toyota_highlander/front_sound.asp What are your thoughts? Why don't we get packages like this in OZ? Might look at chaning the front and rear speakers firstly, worry about an amp at a later time...

If they are the sum total of the changes then I couldnt see any advantage in waiting. In my opinion the tail lights take it back 4 years and the Rav4 type grille. The grille and tail lights you refer to are from the Hybrid (Limited) model. The tail lights are LED. I can't tell the difference in the bumpers. The third row is still one piece, not 50/50 split. The side front indicators are no longer on the fenders. The side mirrors now have "puddle" lights standard, not indicators.

Guys, this is your best source of information for the updated Kluger; http://www.toyota.com/highlander/ Pretty hard to see the difference!

Passenger Side: Great Pics, thanks for that... Is it possible to get a pic of the actual siide step. The tread pattern, how far it sticks out from the side, how is meets the front mudflap etc. Thanks in advance!

Got the trigger wire from the switch to the BCM (Body Control Module), however I have now found that although we have a Light Sensor on KX-S's. It is not functional and only has the positive and negative going to the BCM. It is missing a trigger wire also. Problem is trying to get a trigger wire from the Light Sensor to the BCM. I don't feel like taking the entire dash pad off...

I recall mine being the same - but it doesn't smell at all now. I can't remember how long it took - because your nose gets used to smells - but the strong smell eventually goes away. I have taken the Cargo Mat out and have left outside to air... I will give it another week, it is that BAD! OEM Toyota Part No: PZQ2048080 Ok, three (3) weeks outside, now no smell!!!

Here you go; http://au.toyotaownersclub.com/forums/index.php?showtopic=16789 Also, welcome to the forum...

Can you still keep OEM (Toyota) front and rear mudflaps on when fitting a side step; either OEM (Toyota) or aftermarket? More to the point, front mudflaps...

Ok, so this is now back on the agenda!!! I have myself a Kluger (Highlander) Repair / Workshop Manual. Looks like I should be able to do this, will keep you all up to date!

Got myself a screen protector for the OEM Sat Nav screen; http://www.screenpatronus.com/ Fits perfect! I also have a spare one (Brand New in packet) that suits the 2008 onwards Grande Sat Nav Screen. PM me if interested...

Hi Mate, $90.00 dollars from my local dealer. Had in stock, collected right away!