pezzie

lmao i do. It's so hard to make up mind

I've also still got a spare JDM lip for anyone interested.

But sadly thats the last of it, everything else i've got is going on the car when exams finish. Just 25 more days :D

I've got some things just sitting around that i most likely wont use, so i want them to go to a good home.

1. JL Audio TR 650 csi. $90

- http://mobile.jlaudio.com/products_components.php?comp_id=125

2. JL Audio VR 600 csi. $90

- http://mobile.jlaudio.com/products_components.php?comp_id=124

3. Alpine type R woofers. $70

- These are the speakers which come with the type R splits. They provide awesome midbass!

4. Pioneer GM-6300F 4 channel amplifier $100

- Had it to run the splits

- http://www.pioneerelectronics.com/PUSA/Car/Amplifiers/GM+Series/GM-6300F

5. JDM ZRE152 Auris/Corolla front lip. $150

- I have a spare and its currently wrapped up and ready to be posted, so i dont have actual pictures. However if you're really interested then im willing to unpack it to take pictures of the actual item.

- It is painted in the factory black and the picture shows exactly how the front lip would look on the car.

- No structural damages on the lip, just scraping on the bottom.

6. Blackridge air compressor with hose and spray gun. $100

-Purchased a few months ago to paint some parts but now i dont have the time.

-I shall throw in the receipt for warranty purposes.

All these items are in a good working condition and have been used unless otherwise stated. All items are located in Victoria.

I am willing to post interstate if buyers are willing to pay for postage. Postage will provide tracking and insurance.

I will give you a discount for purchasing multiple items.

Just hit me up with a message if you are interested in anything. :D

Just stumbled upon this while studying

Here's the full article

http://www.7tune.com/scoop-ft-86-jdm-brochure-spy-shots-leaked/

DIY Huey?

yeah. I've currently got the levin lip for prefacelift corollas. I'm just thinking about doing the modellista one to compliment it and painting it black. I might make a mock up with wood first and see whether I like it.

fair enough. I should have some free time these holidays so im thinking about it... hrmm....

How are the fibreglass eyelids going ash?

Have you thought about doing a DIY modellista style front lip with fibreglass?

where are you getting all the plastidip from jeff? Im considering doing my wheels after exams :D

spotted MRVVTI today. Light blue, possibly a sportivo, completely debadged and it didnt have a chance to hit lift in traffic so i couldnt tell. It also had a rear skirt and wingtips and varex twin muffler. Not sure if it was a prefacelift or facelift. I couldnt see the front.

The car was very clean also.

It depends on who you're with and what their terms and conditions are. Just call them up and ask.

Im with RACV and they dont need you to notify them of mods. As long as they are legal and will pass a roadworthy certificate from vicroads then they will insure me.

I think this is because they've realised that OEM is generally more expensive than aftermarket.

well you gotta think about whether the extra features of the eclipse is worth the extra money.

I purchased a pioneer f320bt when it was on sale for 500.

The only things i wanted were gps and ipod control through the ipod and headunit, so that was very worth it for me. It also has heaps of audio options so i can set up my speakers just right.

If you're thinking about upgrading your audio as well, i'd say go for eclipse, alpine or pioneer.

If the plastidip is similar to paint, then use a hairdryer and warm it up so it flows better.

Just spray lighter and further away from the badge.

i decided to do a little bit of research on this. I think you are suppose to put 3M tape along the side skirt rather than the rubber seal, this should make it sit flush since automotive 3M double sided tape is very durable and difficult to remove . I dont think levin owners have a screw at the end of their side skirt, they only have a screw at the front.

here's a few pictures i could find which show no screw.

However, modellista rear spats and TRD front lip require drilling for screws, so it should be good practice for you

LOL i thought you were about to say you purchased an 18inch subwoofer for the rolla

I just realised i'll be in the west early that morning, so i'll drop by for a little and i'll bring my camera along as well. I havent been to a TOCAU meet for ages!

'underneath ur car there's a black piece of plastics that needs to come off first and it will have about 4 holes ? (not sure how many no more and there is 4 plugs that comes with it). Then once thats off u then get ur sideskirt and mount it on using the 4 black plugs to go back in the original place. Also use double sided tape to stick it on. Make sure its clean and has nodirt otherwise its not gonna stick properly. Hope that helps abit lol as i did it ages ago and kinda so so on the memories'

Master.Cuong gave me those tips a while back on installing the side skirts.

Please take photos when you do the installation, i want to see how you put them on since i'll need to do that later this year. :D

http://www.toyota-tech.eu/

jump on that link and go to Owner > Accessory installation manual > Choose 'Auris' > Generation 10/06 > Roof Spoiler

There's a PDF file that shows you how to install the roof spoiler.

you roll the mods in quick!

oh damn. did you get it replaced under warranty Wy?

Mine was the foglight stalk i purchased, i only had it for 2 months and it screwed up on me :( 180 down the drain just for a switch.

@Anon22: Your symptoms are exactly like mine.

My parker lights wouldnt work but headlights would always work. Slight bumps in the road would cause the lights to flicker, or they'll turn on and off.

The parkers, taillights and dashlights all run off the same circuit, so if one dies, they all do. If your issue is not caused by the switch, here are some other possibilities.

- Possibly blown fuse, even if the fuse looks ok, its possible that its blown. This can be found under the passenger glove box.

- Aftermarket headunit illumination cable wired incorrectly, this can kill your parkers and the fuse.

- There is a short in the circuit, this will be indicated by a fuse blowing when you try to turn the parkers on.

good luck on finding a solution!

I had that problem as well. However the cause of mine was the switch. I installed foglights so i purchased a switch from toyota. It worked perfectly for 2 months then one day the dash lights started to flicker. Then it got to the point where it wouldnt turn on. I realised that if i turn the switch really slowly, sometimes the lights will turn on and sometimes they wont. I got sick of it so i put the old switch back in.

After that i havent had a problem.

http://www.installdr.com/Harnesses/Toyota-Wiring.pdf

That file should show you the current wiring.

The only issue i've had is with the illumination wire. It screwed up my parker lights and fuse for some time, so i unwired it and everything has been fine since then.

It would make sense that those wires are for steering wheel controls, it is quite possible that it is prewired for them.

thats not a dumb question mate, i'd like to know what it is as well.

I've had mine unplugged for over a year and havent had a problem with that.

no horn? watch out for a defect bro LOLOL

it's ok Reece he has a sticker that says horn broken watch for finger :P

and Jeffy i hope i don't have a twin out there :(

im pretty sure you have a twin out there, spotted twice around a year and a half ago around the broadmeadows area. Its a silver aurion with black buddyclubs i think (somesort of six spoke rims). Its debaged and not a sportivo. It also has custom number plates, white letters with black background.

For people interested in angel eyes/halo's for the zre

I think this was someones DIY work.

the guy i sold the TTE spoiler to wanted to sell it after i sold it to him, his gf didnt like it. sorry but i've lost his number. As you can tell, im pretty indecisive with all these parts. <_<

copy is great. I took a photo of the copy next to the OEM spoiler a while back. if i can find it i'll post it up.

Here are some photos of the spoiler when i had it on.

No External brake light

There is also a melbourne seller, gonzo bro's in tullamarine.