1badkiwi

Looks good Paul, but they don't look like Kluger rims to me.

Any pics for us Paul ?

Were the fronts always sitting that low? Or did they take a while to settle.

I just put kluger rims and super/ultra low king springs on my camry and the front still sits pretty high compared to the back. I'm just hoping they settle down soon.

I have the same problem and they are 18 months old. My rear springs are almost a 80mm drop now, so I have added load carriers in the rear that raise it about 20mm but still needs another 10-15mm. I find king springs will take 7-14 days to settle and will continue to settle more over time. I know some people run super lows in the front and lows in the back, this is what I'm looking at doing.

King lows 25-30 mm lower than std

King super lows 40-50 mm lower than std

King ultra lows 60-70 mm lower than std

It's only the add on body kit thats damaged, I would have it repaired as a new one will cost more in the long run.

Can I remove the Egr valve or will this just cause the check light to come on ?

100% sure The Check light will come on ~

If I put delete plates in and leave all the EGR in place, will the check light still come on ?

Can I remove the Egr valve or will this just cause the check light to come on ?

So my question is, on the service manual the Sensitivity option can be adjusted to;

Light 2 / Light 1 / Normal / Dark 1 / Dark 2

Which way do I need to go to make my headlights turn on sooner (with it's still a little light outside)

Thanks in advance!

Light 2 will make the auto lights come on sooner.

So after three weeks of driving with the ultra bars I fitted, the Camry now sits flat and turns into corners a lot better. I've also had front and rear camber adjustment bolts and front castor adjustment fitted. I'm very happy with the handling and having the big Kluger brakes on the front, the Camry is now a lot of fun to drive.

You can get King Springs that will give you a 30mm drop or some no name springs from eBay USA that will give you a 50mm drop.

Thanks for the update Phil. How do you find the Kumho's, I'm looking at them myself. Any pic's ?

http://www.1010tires.com/Tools/Tire-Size-Calculator

Tyres are 225/35/19 but will soon be changing to 235/40/19 to get the speedo right.

I'm using super low king springs for now.

The FPV wheels bolt straight on but you will need a plastic ring made to centre the wheel on the hub/brake disk.

Kluger tyres are way off in size that a Aurion or Camry can use safely, I can only see bad things happening if you did.

Thanks Phil. So after Trent's little pokes at me (thanks again for that lol) I decided to have the wheels fitted and not paint or powder coat them. They look killa, so much better than the FPV agents and the Camry seems to drive/feel better on the road. Here's three pics of the three sets of wheels the Camry has had over two years.

What size tyres are people using with 19" Kluger wheels who have them on Camry's or aurion's.

Thanks Trent lol.

The good wife picked up the ultra racing front strut bar and rear sway bar from the transport company today. I'll post some pictures when I get them out of the dam packaging, at this rate I'll have them install on the car faster than the unwrapping will take.

The wife and I have decided to paint the gray painted areas on the alloys gloss black to match the car, so I'll be leaving the face polished for a almost factory look.

I've been looking for 19" Kluger alloys for a few months now to replace the 19x8 FPV agents because of the 28.5 rear off set. So tonight on the way home from work I picked up a set that are 98% scratch free.

I'll be getting them power coated before they are fitted with tyres, but the wife and I have to agree on a colour first. I want bronze but it's not looking good for me.

I'm looking for TRD aurion interior, front and rear seats, door trims, steering wheel and gear shifter.

I found seats and door trims on eBay but will not post. I was hoping some one in Perth would know of a TRD aurion being wrecked. Any help will be appreciated, thanks.

Thanks Gaz. I had the yellow sticker removed three days after I posted this topic, so all good now.

I know this is for a Camry but it might fit.

http://www.ebay.com.au/itm/MARS-Performance-Cat-Back-Exhaust-System-Muffler-for-Toyota-Camry-2-5-engine-12-/131464555936?pt=LH_DefaultDomain_15&hash=item1e9be5eda0

Stud pattern is 5x114.3 and try the link below, hope this helps.

http://au.toyotaownersclub.com/forums/topic/29603-aurion-wheels-rims-tyres-tires-specification-thread/

Yes, twin piston calliper and 328mm disk.

This is the only picture I've taken, sorry no before pic.