Tom James

Replaced both bulbs on My 2007 Aurion Presara this morning, as everyone was bit worried about removing bumper bar to access head light assy. so thought will try to unscrew the cover behind assy and try to change but no it wasnt that easy to do that because there is not enough space to actually get a screwdriver or ratchet in there , so decided to remove bumper bar, had a look at the forum and there are some good step by step guide to remove bumper bar in this site, so followed it , make sure that you don't pull the bumper way too far out because presara got a head lamp washer system and fog lamp cables don't damage it while removing bumper bar, reomved bumper bar and then removed headlamp assy the unscrew 4 screws behind the assy and remove the high voltage connector and then remove bulb be careful when you do this because there is a high voltage ballast there supplying power to these bulbs, so ignition must be off and head lamp switch to off position and i suggest to pull battery ground for safety. replaced bulbs and put back together and tested it before putting the bumper bar back and it all works sweet. Toyota dealer quoted me 480 per bulb + fitting charges and i bought bulb from ebay (http://www.ebay.com.au/itm/251255510442) 120$ including shipping and so far am happy. this ebay seller seems to have pretty good seller history that's why i decided to buy from him

Yes mate, i have the exact same sat nav as you, and it works great. You can control your music from your iphone or from the seek buttons.Hi mate I do have a 2007 presara with sat nav. I tried to install a grom audio kit few months back. Yes it did work except you wont be able to see the file names on the satnav . It just shows upbas track 01 n so on Can you tell me on the gta car kits is it possible to see the track names or id3 tags

Hi Guys n Gals Nice to see all these info , but am lost Am trying to Install a Pair of Rockfordfosgate Power T1693 (http://www.rockfordf...?itemid=112902) on Front Doors on my Toyota Aurion Presara.. I already have a Set of T1693 on Rear Channels and I love the clarity of sound they produce , So i wanna do that on the Front Doors, But am trying to find out what kind of mounting depth i can get from Aurion Presara front doors. While installing rear speakers i had a lot of issues with clearances and still the magnet has got 1 mm clearance with boot linkages., I dont want to rip the door panels and end up with a not possible verdict ,so if anyone has done something similar pls let me know. Below is my set up JBL MS-A1004 Rockford Fosgate Power T1693 >> 6X9 Speakers 3 Way (Mounting Depth 86mm) 100W RMS on Rear Rockford Fosgate Power T1693 >> 6X9 - Trying to Install on Front Door Spacers am planning to use is http://www.car-speak...s.php?id=SAK010 they are 1" deep

Hi all fellow members this is Tom from Gladstone, Car - Toyota Aurion Presara 2007 Mods done - 19" Alloy Mods in progress - Audio System complete upgrade Interior lighting Upgrade DRL - Homework to be done Profession Mechanical/Marine Engineer Interests Cars/bikes/Photography