bigVAN

looks good man gotta do my one

were you on humehighway ,woodville intersection ? with the mightcarmod decal ?

that display looks maaaaadddd .

white rolla , with volks and mightcarmod.com decal . black badges . woodville , hume highway intersection Lansvale .

gold aurion on coils on woodville .

That's bad luck Ben, not too much damage I hope. A few of our drivers are buying cameras as well due to most people saying " it was the trucks fault" ha well now they can prove otherwise.. Plenty of crazy P plate footage that's for sure

you should see the idiots i deal with everyday on woodville rd .

p platers , pensioners , anyone i have proof of wreckless driving,

if only i was a cop

dat grill is awesome !

I love it, great how the US and AU Camrys are similar enough for these bits.

Pricey - $400 or thereabouts.

Wow verypricey. Found a set for 200

1) This is not a sportivo body kit. However i can tell you that if youre go from altise to sportivo it is possible. Might need to drill into the bumpers as the sportivo kit has slits that slide into the bumper to hold it in place. Obviously there is a way around it. Can grind the slits off and stick it on with double sides sticky tape and screws. Can get the sportivo kit from any wreckers. Again, the kit i have on is NOT A SPORTIVO kit despite the rear looking like it does.

2) Wheel and tyre specs i will keep to myself sorry. However, these guards are not stock

5) Dual exhausts can easily be done. However yes you do need to cut the bumper. No there isnt any noticable loss in power

the hunt is not so gooood -_-

as for the dual , ill see how the other forum member goes with it first .

dat grill is awesome !

weak offset

Reverse + spacers should do it

Pm sent !!

Its going cheap grab a bargain !

zre / aurion / camry, owners go crazy on these genuine wheels

http://www.ebay.com....=item20c9427408

and this fellla takes it too far

i know they have been uploaded several months ago , but just incase anyone else hasnt seen!

Sounds nice !

shake the can for 30secs , spray it and wait till it dries then repeat with light coats

its on the way to my place ;)

just get it off ebay its only like several bucks or something

It wouldn't end up looking very nice unfortunately.

They're not exactly a semi-circle - they're more half egg shaped - which would mean that if I get it cut, both sides would've probably ended up in different sizes.

Toyota didn't just cut these out, they bend it up on the inside as well :)

cool , tell me how it goes for the dual exhaust and wheere you did it + cost .

something i might do in the future but for now ill leave it, even i though i got all the parts ready to go !

if you get rid of your rear lip let me have it !

I might try Liverpool Exhausts in Sydney and see how much they do it for.

I have to get the bumper painted first which will set me back $300 :)

I send you a PM regarding the rear lip - you'd probably have to get it painted as well since it's green.

Unless you want to paint your car green ;)

Also Simplyvandinh, you have any clues where I need to wire my footwell lighting for the front?

Ive been told Liverpool exhaust have horrible welding.

I would source them on ebay my friend. It's much cheaper. If you can't wait for the wires from hongkong try strathfield audio,dicksmith,bunnings as they supply electrical goods.

Spotted a black corolla sedan with stretched black rims I think its on coils on the way to condell park about 3ish looking nice .

Should be mister 2204, his ride is crazy black on black

Rubbish.

People set the expectation bar way too high on everything. The customer service side of everything has been amped up to incredible levels and has resultantly pushed everyone's expectations up with it.

very true .

at the end of the day it comes down to the person at the dealership serving you, not the company/business itself. Only way to overcome this is to source out another dealership as Andrew said.

any ZRE owners looking for stockies ?

or needing it to sell the car ?

well these seem really good and descent !

http://www.ebay.com.au/itm/271026419029?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

goodluck ~!

Well today I tried installing and there was only think that I cannot do, and that was running the cables through the metal thingy. The plug to the ballast was too big. Is there a way around this?

its best to use h7's with the bracket on the oem plug (the silver bit) which holds the hid bulb in place.

It wouldn't end up looking very nice unfortunately.

They're not exactly a semi-circle - they're more half egg shaped - which would mean that if I get it cut, both sides would've probably ended up in different sizes.

Toyota didn't just cut these out, they bend it up on the inside as well :)

cool , tell me how it goes for the dual exhaust and wheere you did it + cost .

something i might do in the future but for now ill leave it, even i though i got all the parts ready to go !

if you get rid of your rear lip let me have it !

Whats the offset? Lols 12, do they even make rear camber kits for zre?

im not to sure of the offset , its not even engraved at the back . havent tried working it out though, but from a visual somewhere round there lol.

sure is mexican ahahah . and its only 7.5 wide .

Probably JQOOLZ^, again.

nope its not , i would recognize it. red plate, red shoes, eyelids werent visible .

was yellow license plate & different exhaust

Which parts do you have?

AURION/CAMRY Rear Side Lower Bar (4 points)