coleb161

I use penrite pro 5

Iv put injector cleaners in today ill do an oil change in a few day see how it goes.

My uncle just got a 2015 kluger same engine his is definitely not as noisy. I put stethoscope on his injectors the seem a little bit quieter but i was walking from a garage to the road so i might put them side by side. Ill do a service and try 5W-40 see how it goes

20200831_171747_1_1.mp4 20200831_171747_2_1.mp4

20200831_171747.mp4 I have noticed the ticking noise before it dose seem to be louder then i remember. Iv only started taking more notice because a friend brought it to my attention when they where standing out side my car. I dont hear the noise in the car only drive past building and parked cars ext. As for Performance i haven't noticed any loss there seems to me ok. One thing i noticed today when i put petrol in my cruising range was a little lower then normal. By around 70km.

I have a longer video just need to upload it In terms of condition its been serviced every 7500km from new 5w30 oil it has 137000km It hasn't had a hard life but it hasn't been babied either I have put a stethoscope over the engine the injectors are very noisy at the base and you can feel them pulse when your holding the stethoscope The front timing cover is quite and the front rocker cover is the same. When i put it on the back cover i can slightly hear the noise but very quite but the only way to put the stethoscope on the back cover is through the gaps in the inlet manifold.

Only after it gets to operating temperature 20200822_134343.mp4

Hello i have a 2012 aurion it is making a ticking noise when it gets to operating temperature its ok till them service history is good oil is good. I have seen on the internet about a middle bit in manifold coming lose but but it dose not say much about what noise it was making and one have this problem or has come across it??

And tweeters in dash

Oh ok I thought swaybars were solid spring steel if they weren't solid wouldn't they just twist ?

16x16x16x16= 65.635 19x19x19x19=130.321 divide the to and you get 1.98 so the 19mm will be prity much 2x stiffer. The 23mm kum up 4.27 so heaps stiffer

Yea I think I might go with the 19 mm swaybar and front strut brave. I found a write up on swaybars for fwd cars and it told me how to work out how much stiffer the new bar would be over the old one. You just times the thicknes of you old by for so mine is 16mm the you time the size your going to so 19mm or 23mm then you divide one into the ather and thats how much stiffer it would be

I'm just gona lower it get better shocks. No track work so just won't it to handle better then what it dus now

Ultra racing is the brand they have 19 mm and 23 mm

Hi robf What size rear sway bar did you upgrade to ?? I'm looking at the 23 mm one. But my one on the car at the mo is only 16 mm don't want it to be too stiff that I cause the car to spin out. Does anyone know what size they use on the sportivos ?

Oh and the rims are 17 inch. They do look small tho I'm gona lower mine only so the gap from the tyre to the garde is closed

Hey mate ill tri and get sum photos together on the weekend. As for the handling I just measured my rear swaybar its only 16 mm that will make heaps of diff I'm gona get the ultra racing rear sway bar its 23 mm that will make it a sh#t load better frunt strut brace and it will handle like the sportevo if no better

The audio for standed was realy good The ride feels ok but is a little bit of a boat so not realy good I'm just about to upgread my rear sway bar and put a strut brace on it so should be good soon. Power is crazy I can't get over how quick it moves out take of is wicked and evin a boot fool at 80 is wicked. My old man has a ve sv6 and it go's way harder and turning of the tracktion corntrol make heaps if diff to the take to.. can't say enuf about the power!!! That dash it got lether on top and its got a mat finish in silver and sorter gold I can put photos up if you like. Hope that's what you where after if you wona anything els ill be happy to help

Hey mate I got the 2012 touring aurion I realy like it what would you like to no about it.

Hey robf did you use the ultra racing set

Sound like they should be a good I shell sus them out and fit them up

Hello everyone has anyone use the ultra racing sway bars and braces on there aurion. I emailed ultra racing I told them I have the 2012 aurion gsv50r model and if they had options for it there emailed me back saying there Camry range will fit but not sure... My aurion is the Turing model and the handling is ok but would like it to be abit stiffer on the road

Hey everyone is the headunit and speaker wires and lay out the same in all the aurions or do they change in the 2012 models just need a wiring diagram of the 2012 aurion

Hey not sure if this has been up on here yet just signed up but has anyone upgraded the speakers in the 2012 aurion I am looking at putting 6.5 inch 6x9 tweeters amp to run them and a amp for a sub getting power to the amps are ok but not sure on the speakers there are tweeters up frunt got for lots of wires going to them just need to no how there wired up