Jump to content


MIIKEY

Regular Member
  • Posts

    156
  • Joined

  • Last visited

Posts posted by MIIKEY

  1. what's wrong with the actual rack? It's pretty rare for the rack to need replacing unless it's been in an accident big enough to stuff the pinion etc. The $40 rack ends usually bend before the actual rack gets damaged.

    not sure if its been in a axident or anything, ShAnE on SRC is selling it n im interested , he says thats the only thing wrong with it, he told me it was loose :S

  2. why do you need to replace the rack?

    rack ends etc can be replaced with the rack in the car.

    If you need to replace the rack because it's leaking, drain the PS fluid, disconnect the lines, disconnect the steering shaft from the rack at the knuckle, disconnect the ball joints from the hubs, remove the bolts holding the front and rear engine mounts to the subframe, support subframe with jack towards the rear, unbolt the two nuts and bolt at the base of each hub,, remove exhaust mid section after removing oxygen sensor, undo the three bolts holding the front of the subframe to the lower radiator support, undo the rest of the bolts holding the subframe to the chassis and lower it down.

    Unbolt rack from the subframe, install new rack and then assemble car in reverse of the dissasembly.

    wow it seems soo confusing

    i found a first car i want but it needs a new steering rack , i just wanted to know wats involved in changing it

  3. after reading what northy said about the 360's i changed my mind n cancelled my layby, saved up n bought a ps3 :yahoo:

    best thing iv done :toast:

    now another question :D what mods can b done to a ps3 without voidin the warranty :D thx for the help

  4. not as silly as it sounds as they a prone to over heating and also the red ring of death.....

    your scarin mee!!

    i dont wanna be wasting my money on something that will need to be sent back every 2 months

    do u know what causes these problems or wat u can do to prevent them b sides the normal game usage?

    sounds like you havn't done much research.....

    Microsoft has admitted that every one of the 11.6 million Xbox 360 consoles sold in the past 19 months suffers from a design flaw that could cause the device to fail.

    The firm will extend the warranty coverage from one to three years to compensate consumers, but does not plan to instate a recall or exchange programme.

    Microsoft gaming chief Robbie Bach claimed in a conference call with financial analysts that the design issues surfaced recently.

    "In the past couple of months we started to see significant increases in repair requests and call requests and significant attention from people," he said.

    Microsoft did not disclose the exact nature of the problems, but said that it had made the necessary design changes and that units currently in stock will be upgraded.

    The extended warranty period is limited to hardware failures indicated by three flashing red lights on the console. Users of consoles suffering from such problems are entitled to free repairs and shipping.

    Microsoft estimated that the repairs will cost the company US$1.05bn to US$1.15bn, spilt evenly between the higher than expected return rates for existing consoles under the one-year warranty, and future returns under the extended warranty period.

    na i didnt do much research, i just read the specs n said yep lets go n buy 1 , i didnt think to look for the problems untill u told me jus b4

  5. not as silly as it sounds as they a prone to over heating and also the red ring of death.....

    your scarin mee!!

    i dont wanna be wasting my money on something that will need to be sent back every 2 months

    do u know what causes these problems or wat u can do to prevent them b sides the normal game usage?

  6. yes those adapaters work, i bought the pioneer deh-P5850mp and went to auto barn and asked for the pre made wire kits, they showed me what ones n it costed about 30 bucks all up for the wiring kit, the head unit works fine

  7. Yeah..... if you ever have problems with bunny hopping or hill starts, just dial in around 5,000rpm and release the clutch as quickly as possible. Problems solved :)

    i love ur thought!! but that ends up in wheel spins right? sorry imma noob when it comes to that sorta thing

    im determine to learn in the manual i just hope my parents have the patients lol

    im hopefully gunna try tomorrow :yahoo:

    any1 in the mounty/plumpton/rooty hill area got a place to recommend ?

×
×
  • Create New...

Forums


News


Membership