hiwtf

toyota of mcdonough parts contacted me back saying they're only willing to sell the whole kit not just the diffuser on it's own... :(

Ahh i see. I think black is probably the easiest color to spray so i'll try DIY spray it... if not i'll just sand it down myself, prime it and give it to someone todo it I'm planning to just get the rear diffuser, get it wrapped/painted then put it on

Yeah i have magnaflows

yeah same i wouldn't buy it myself but i'm planning to get an exhaust system for my car... Trying to find one that's not too loud though. Yeah anytime. Mine aren't loud when idle but when i put my foot down you can hear it. It's not that loud either

Sounds pretty good. I wanted the rear diffuser and was gonna prime it myself then get it wrapped matte black... or if that's not possible then i might just try DIY spray and fitting, maybe. Let me know how it all goes! As in the stock aurion rear end? or an aftermarket one? I've seen an aftermarket aurion rear diffuser and it looked like the 86's rear diffuser. Looked pretty good but seemed like no one was able to source out where to get it from :\

I'd say just get a muffler... unless you want the power boost then get an exhaust system and those mufflers that you can open and close electronically like the varex

Very nice Rich. I was actually planning to create a thread on here the other day but got busy haha

Ahh sounds good! Thanks for that. Sounds like you went through alot of trouble just to get it haha. I only started my search a few days ago to just find the rear diffuser but it seemed impossible. I did contact 2 places that sold XSP items (no body kits or anything like that though) and no reply lol. Nice. Should be looking sweet

Oh really? did you get the whole set? I just want the rear bumper... Can't seem to find it anywhere online Oh nice. What wheels you planning on getting?

Gotta play with the air suspension more to get it to sit properly, the way i want it to I'm also trying to source where i can get the XSP camry rear bumper from the states and i plan to DIY side and front splitters umm looking for a new set of wheels too but that'll be later on

Thanks guys :) Here's a few photos i took after picking up the car this morning.

They're nice guys and reliable. I met them threw a mate so that's how I became friends with them haha They also charge pretty cheap/decent prices for everything they do too

Car is done. Full AIRREX kit installed! Won't be able to pick it up til tomorow morning though due to being busy with work... Tyrepower north staff took the photos and sent it to me; also changed tyres for more stretch. Fronts 215/35/19 Rears 225/35/19

Getting the rears installed tomorrow so if all goes well, i'll record a video for you guys. Damn... time will fly. Next thing you know, it'll be 2015 and you'll have your air suspention too haha

ooooo so that was you... I was at my mate's house and i saw a car drive pass then reverse back, didn't think much of it so i continued to close the front door and walk back inside haha

Just got these delivered :)

Airrex installed in the fronts. Unable to do the rears cause the people who worked on my car previously, tightened the bolts too hard so we couldn't get it off using 'man power' I have yet to set the front suspensions properly but once the rears are done, i'll set all 4. Must say, the handling has slightly improved with the 2 airrex struts in the fronts :)

This is what the package looked like when it came FYI: Front air strut with missing sway bar bracket compared to BC coilovers; Routing of airline/power cables to engine bay: Folded the backseats down, didn't need to take off the back seats luckily since there's plenty of space to feed the wires through removed kick panels from back passenger side removed kick panels from front passenger side, fed the wires behind the panel of where the seatbelt hangs Located where the firewall to engine bay was Firewall was pretty easy to get to. Removed the groumet and drilled a small hole into it to feed the wires through. NOTE: Pictures only show power cables and no airlines. I did the airlines after (exactly the same way i did the power cables) i took these photos. I always forget to take photos when i do **** like this so i apologise for the poor effort but... this gives you a rough idea...

sway bar brackets are on their way and should be continuing installation this saturday... if not, sunday.

Not too sure if i will but if i do then i'll let you guys know. Update on the install: We did all the power and airline routing, covered it all up neatly and jacked up the car to install the Air Struts BUT after taking out one of the front BC coilovers and picking up the AIRREX air strut, we noticed the front air struts were missing a sway bar link... So today's session failed. Had to reinstall the Bc coilovers and contact AirRex australia about it. They said the air struts shouldve came with an integrated sway bar link or a clamp on one and they're going to try resolve the problem ASAP.

Got my wheels back and put stickers and centre caps on :)

That's an option i never looked at... haha but i think i still prefer the airrex cause it comes pre assembled and is digital! Nah i haven't. Planning to DIY this sunday if i'm free

OMFG... AIRREX!!! so jealous man... Sadly I'm not gonna get Airrex, gonna go with slam specialties air bellows front and rear with Accuair air managment system with touchpad. All this goes under $3K Ooo never heard of that. Does it come with the full kit? or is it only the bellow?

very nice. Gees -3 camber? How much did you drop it by? Camber bolts will only bring it to about -2 to -1.5 camber but sadly there's no adjustable control arms for our model to fix it completely

A keyring of something that got delivered today...