Jump to content


jacko16

Regular Member
  • Posts

    51
  • Joined

  • Last visited

  • Days Won

    1

jacko16 last won the day on May 29 2016

jacko16 had the most liked content!

Profile Information

  • Toyota Model
    Aurion Presara
  • Toyota Year
    2019
  • Location
    Please Select

Contact Methods

  • ICQ
    0
  • First Name
    Iack

Recent Profile Visitors

5,571 profile views

jacko16's Achievements

Collaborator

Collaborator (7/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

2

Reputation

  1. Thanks for this, good job. Do you still have the Toyota bulletin showing to add 200ml? Please and also haw save is it to user after market ATF. Thanks.
  2. IMG_8533.MOV This is the noise. New belt and all the pulleys test ok.
  3. Hi all. On My 2010 Toyota Aurion has a shaking belt tensioner assy. Any hlep?
  4. Hi there, In my 2010 Aurion and after a day a rattle appeared from the engine under load at idle (ie in R or D sitting stationery or with A/C on). The Car have only 50,000.K I have changed the Blet and the Alternator. This noise is coming from the belt and pulley. If I remove the belt its ok. No Noise. Any Help? Thanks Engine hot or cold noise is still there when engine is under load. At Hi RPM there is no noise. Thanks
  5. I have 2 of this Toyota Aurions, GSV40. One is 2007 and the other is 2010. The 2007 idle timing is about 15deg and the 2010 is about 11deg. When I drive the 2007 one I can has a quick pick-up. The 2010 flees slow. Thanks
  6. Hi I have Toyota Aurion 2010 GSV40. Is there any way I can Advance the ignition timing? I have Techstreem. Thanks
  7. Hi just check, when you put the car on reverse will the LCD change? there can be 2 things to check, is it a power problem or a video fault. If you put the car on reverse and the LCD is not changing then you are not getting switching from the revering gear switch. Also just wanted to know if it picks up all the local Aust radio? and did you had to bye a new GPS sim For Australia? Or it came with one? thanks
  8. Just to let you know I did my car some time a go and the top bearings have to be changed every time you remove them. Thanks
  9. Yes that is correct. you can get King Springs from Repco get the bump stoppers from Toyota. you have to mark and also take pictures of the top plate and the springs and after the job is over get a full wheel allimemt. but mark every thing befor you start to take any thing out. also note The 2 big Camber bolts are vert tight.
  10. I have a 2007 Pesara and I changed the front struts, the top bearings and springs and bump protectors so did the whole lot. So if you are opening it to change the struts, you're best to do the whole lot.
  11. http://www.ebay.com.au/itm/TOYOTA-AURION-Front-Shock-Absorber-Strut-Bearing-/262126974142
×
×
  • Create New...

Forums


News


Membership