How to peel off dealer stickers...

[justbeatit]

Hi guys,

just a quick question, I think someone here might have the same experience...dealer's sticker on rear windscreen, I sooo wanna peel it off, but it seems impossible, I tried and it took me more than 10 mins to peel off a tiny part of it...anyone got a better idea?

Cheers

Ray

[eviltwin]

heat gun + paint scraper and some care

[justbeatit]

heat gun + paint scraper and some care

Thanks buddy! :D

I will give it a go.

[IMB055]

Good advice re heat gun.

But if you don't have access to one, grab a razor blade from hardware store, and perhaps use some hot water to help loosen the adhesive.

Always with a lot of care though.

[justbeatit]

Good advice re heat gun.

But if you don't have access to one, grab a razor blade from hardware store, and perhaps use some hot water to help loosen the adhesive.

Always with a lot of care though.

Thanks for that, I will make sure i won't crack the glass.... :P

[tomee]

stanley knife blade and windex to remove the glue

[IMB055]

Good advice re heat gun.

But if you don't have access to one, grab a razor blade from hardware store, and perhaps use some hot water to help loosen the adhesive.

Always with a lot of care though.

Thanks for that, I will make sure i won't crack the glass.... :P

Cool as - I still have the image of an uncoordinated friend putting a lot of pressure on the blade, and slicing it through the sticker and into his window rubber.......what a goose!

[cuppas]

+1 razorblade

i work at a dealership lol

[Rolla Boy]

Make sure you wet the screen first otherwise the blade will scratch the glass...

[LEGEND888]

Make sure you wet the screen first otherwise the blade will scratch the glass...

agree with the post above!! gotta take care as if u scratch glass... its gone ! >< lolz

[Kenneth]

Make sure you wet the screen first otherwise the blade will scratch the glass...

agree with the post above!! gotta take care as if u scratch glass... its gone ! >< lolz

its not gone :P just annoying.. i have a few fine one :P heheh

[cuppas]

eh its heaps hard to scratch glass if you do it right

i put a fair amount of pressure on the blade, holding it at like a 45 degree angle

it sorta conforms to the shape of the glass