Jump to content

Looking For 15 x 6.5 inch Alloy Wheels for Toyota Camry Gen 5

K8Canb

By K8Canb
in Camry Club

 Share

Recommended Posts

K8Canb Rising Star

K8Canb

Posted
Posted

I am looking for four or five alloy wheels (machined finish) for my Toyota Gen 5 Camry Altise 2005. I checked with wreckers in Canberra and could not get from anyone.

Anyone like to part with their alloys sitting in their garrage? If so Pm me with the price and condition.

Thanks in advance

K8Canb

Link to comment
Share on other sites

Ronnyboy Grand Master

Ronnyboy

Posted
Posted

I am looking for four or five alloy wheels (machined finish) for my Toyota Gen 5 Camry Altise 2005. I checked with wreckers in Canberra and could not get from anyone.

Anyone like to part with their alloys sitting in their garrage? If so Pm me with the price and condition.

Thanks in advance

K8Canb

Might have something for you,

post-17377-0-53879500-1295168215_thumb.j

post-17377-0-27464100-1295168222_thumb.j

Link to comment
Share on other sites
sikwitit Veteran

sikwitit

Posted
Posted

if you dont mind me asking y go standard size y not go bigger you will have a much larger range of wheels but if you do want a set of 15*6.5 you wont find many wheels in that size most wheels in that size range are 4*100 honda stud pattern and they will look rediculsus on a big car like a camry go atleast 17*8 and you will have a nice range of wheels on a gen5 you can fit 18*8 no problems

sean

Link to comment
Share on other sites
K8Canb Rising Star

K8Canb

Posted
  • Author
Posted

if you dont mind me asking y go standard size y not go bigger you will have a much larger range of wheels but if you do want a set of 15*6.5 you wont find many wheels in that size most wheels in that size range are 4*100 honda stud pattern and they will look rediculsus on a big car like a camry go atleast 17*8 and you will have a nice range of wheels on a gen5 you can fit 18*8 no problems

sean

I have used 6 inch (stock) as well as 6.5 inch wide wheels on my 1995 Camry Vienta and found wider wheels give better driving feel.

K8Canb

Link to comment
Share on other sites

K8Canb Rising Star

K8Canb

Posted
  • Author
Posted

I am looking for four or five alloy wheels (machined finish) for my Toyota Gen 5 Camry Altise 2005. I checked with wreckers in Canberra and could not get from anyone.

Anyone like to part with their alloys sitting in their garrage? If so Pm me with the price and condition.

Thanks in advance

K8Canb

Might have something for you,

please see my PM

Thanks

K8Canb

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 51

      Flashing 4WD Lo and VSC and Engine warning lights

      Not ideal where you are but I would ry a couple of things: Either disconnect the batteries (both) and leave for a good 10 mins - enough time for all electrics to discharge.. Another one which worked for me was to disconnect the ECU - big plug on the passenger side firewall. Same thing, allow for electrics/electronics to discharge. Not practical for you at this stage but if you can get a Scangauge. This will allow you to clear the codes. Car has gone in limp mode. I had this problem several times whilst towing a caravan due to a performance chip which would cause a limp mode. No more as I have had the ECU remapped.
      larry200 in Landcruiser Club
    2. 51

      Flashing 4WD Lo and VSC and Engine warning lights

      Hi I have a 2011 landcruiser GXL I am experiencing this issue right now & stuck in Cocklebiddy. Can anyone assist please ?
      focm in Landcruiser Club
    3. 1

      1kzte throttle body

      Hi Simon, You could try this mob. Genuine Japanese Car Part Imports - Amayama I have found that they seem to have everything, and their prices are good. Herb
      ozieagle in Toyota 4x4 Club
    4. 0

      Aftermarket parking sensor

      Can I install an aftermarket parking sensor onto 2022 Toyota Corolla Hybrid Ascent Sport in VIC without affecting my car's warranty?
      Redcenternt in Corolla / Corolla Sportivo Club
    5. 0

      Long start time when engine warm - 2004 Corolla

      Hi guys, I’m a long time Toyota owner, and am currently enjoying a 2004 Corolla Wagon with the 1.8 1ZZ-FE. The car starts and drives really well, however during warm starts (after sitting for 5 minutes) the car cranks for around 6-8 seconds before starting. It’s worth noting the following: - The car starts right away in the morning or if it hasn’t been driven for a couple of hours. - There is no indication of rough idle or fluctuations when driving - Outside air temperature doesn’t seem to make a difference I’m wondering if anyone has experience with this issue? I’m leaning towards vapour lock in the fuel rail caused by leaky injectors? I’d appreciate any advice or if anyone has had a similar issue with their car. Thanks very much in advance, Oakley
      Oakley D in Corolla / Corolla Sportivo Club
    6. 4

      Head Unit with Apple CarPlay

      Hi gillystylez, the link for your car and stereo is https://aerpro.com/vehicles/toyota/toyota-rav4-2013 I am not to sure with yours but you will need the APP9 Harness and Patch Lead, double DIN facia plate, possibly the T Harness (for adding aftermarket bluetooth car kits), double check with a supplier of the kits (Super Cheap, Repco...) to make sure of what you will need and get a quote on fitment or harness. I had to buy HEAPS more cables with the JVC unit and it was very expensive. Hope that helps!
      Wifes_Rav4 in RAV4 Club
    7. 8

      Brand new Prado 2022 with intermittent engine/transmission stutter

      Gday Doug (600C), I have a 2023 GXL that from new that has a ‘whoo-whoo’ sound at similiar revs that you describe. Its most anoying at 75km/hour in top gear under load ie. up a slight hill. Toyota guy cant give an explaination but says he drove another one with only 1000kms on the clock and did the same. Have you found a cure or diagnosis at all?
      Mick White in Prado Club
    8. 1

      Corolla 2007/2008 ZRE152 2ZR-FE Hood insulator

      I immediately thought of sound deadener material which is available from JayCar as a potential solution. https://www.jaycar.com.au/combination-butyl-foam-super-sound-deadener/p/AX3689
      • 1
      • Like
      campbeam in Corolla / Corolla Sportivo Club
    9. 1

      Corolla 2007/2008 ZRE152 2ZR-FE Hood insulator

      Hi, I've tried to get a hood insulator from Amayama OEM suppliers and Sydney wreckers with no luck. Wreckers usually sell hoods/bonnets with them attached. I called Toyota and unbelievably. they sell them for $700 plus. Is there a way to repair? or get some insulator material to make my own? My one is crumbling and cracked.
      jim2611 in Corolla / Corolla Sportivo Club
    10. 0

      Prado 2012 Issues starting first time, sometimes

      Hi all, For some reason my 2012 Prado is having dramas starting first time every so often. Regularly serviced 192k KMs. Sounds really rough during initial failed attempt to start. Then on second attempt will start fine no drama's. Sometimes I can hear a little bit of that initial struggle during a cold start and will still start. Everything else seems to be running fine. Thinking it could be a fob or immobiliser issue? Have had the same result with both main and spare key fob. Booked mechanic in a couple of weeks for diagnosis but hoping to point him in the right direction. First video is the no start and the second is immediately after appearing fine. Cheers! cold start fail.mp4 success.mp4
      Arad91 in Prado Club
×
×
  • Create New...

Forums

News

Membership