Jump to content

Recommended Posts

Posted

I took a road trip to WA (from Sydney) over the holiday season and notticed differences on fuel consumptions between NSW and WA. I have the 09 model Kluger and I always put in premium ULP either from Shell or Caltex . The car normally assumed around 10 Lt/100km when travelling long distance at eastern states (QLD, NSW, Melb). When I was in WA, the consumption went up to around 13 Lt/100km and at one stage, I suspected the car was having trouble. So I decided to keep the record on my way back. See below of the chart:

Petrol Station Location Petrol Type Price ($/Lt) Consumption (Lt/100km) Note

Esperance (WA) Caltex 98Vortex $1.44 13.1

Balladonia Road House (WA) BP 91 $1.80 15.5 Added $52, Still have 1/5 of a tank when filling

Cocklebiddy (WA) BP Premium $1.90 16.1 Added $84.51 to the empty tank (distance to travel = 0)

Eucla (WA) Caltex Standard ULP $1.61 14.7 Added 2 Lt from the Jerry tank on the way, empty when filling

Ceduna (SA) Shell V-Power $1.52 12 Added all petrol from the Jerry Tank on the way

Port Augusta (SA) Shell V-Power $1.33 12

Broken Hill (NSW) Caltex Vertex 95 $1.41 11.5

Cobar (NSW) Shell 95 $1.43 11.6

Dubbo (NSW) Shell V-Power $1.38 10.2 Still have 1/3 of Petrol in Tank after 400km of travel

So I concluded there must be some Fuel substances being used in WA, specially for those petrol stations located on the Eyre High Way. I would not mind paying extra for fuel when travelling at remote area like Eyre HighWay but I do not like the fuel consuption rate is so high (a full Tank goes $350km instead of $600). I would have been in trouble if I did not have the 20Lt Jerry Tank with me. Does anyone has the same experience?


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership