Jump to content


1998 Camry V6 blows white-blueish smoke at cold start up


frankscamry

Recommended Posts

Hi,

My 98 Camry with the 3.0 litre engine and 107k miles is blowing white blueish smoke on cold startups. Yesterday it was standing for 6 hours after a 2-3 hour city drive and it was building up a cloud over half the street after starting the engine. BTW, service two months go put 15W40 in. The guy I bought it from was talking about compression issues which were resolved, allegedly.

Today, it got better, just a little smoke this time.

Blue indicates oil. Not loosing coolant, so probably no head gasket issue.

Not missing any oil, rather looks like it has too much in it. Not smelling sweet, rather acidic.

I suppose its somehow burning oil. One mechanic said without looking at it: "It needs a rebuilt. $ 4500"

What shall I do? I read about valve steam seals or something. How can they be replaced? How much does this normally cost? How important is it? what happens if I keep driving her without doing it?

AND: Where is a good and reasonable Toyota mechanic in Sydney (more or less central) which is not a dealer?

Thanks!

Frank

Edited by frankscamry
Link to comment
Share on other sites


Valve Stem Seals are the most likely culprit(due to it sitting allowing oil to seep through and burn on start up), however, worst case scenario could be the pistons rings. Is the oil milky at all?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Centre Bearing Replacement

    2. 0

      2013 kluger media firmware software update

    3. 6

      Wheels and tyres combos for various terrain

    4. 0

      squeak when turn steering wheel sometimes

    5. 0

      maps in 2017 Camry Altise

    6. 5

      Faulty braking system in land cruiser 200 series 2016 model

    7. 4

      3rd Gen (XU50) Kluger new aftermarket radio install

    8. 0

      Front Cameras

    9. 51

      Flashing 4WD Lo and VSC and Engine warning lights

    10. 51

      Flashing 4WD Lo and VSC and Engine warning lights

×
×
  • Create New...

Forums


News


Membership