Toyota Tarago ACR50R Front Disk Pads

[nedlam]

Hi Guys, i arrive home to the Wife telling me that the Toyota Tarago ACR50R is making a noise when driving.

I roll down the Drive way to take it around the Block. On rolling out the drive way only inches i hear a noise.

Its got to be the pads. Though i have not done these in years (15) on other cars. It may have taken me 1hr to just inspect.

Now i have a caliper haning in there and no pads.

What is the eaisest and correct way to change these?

As on looking i removed the Caliper on the Left where the noise was. But i can not get the old pads back in.

How do i push in the piston as these lining will be thicker and impossible to put back??

Also what brand do ppls use? At work i have an account with ATAP and Bendix, but i think i'll get bendix through ATAP as i have the car apart???

Dean

[ledgend]

i normally use a g clamp to push caliper pistons back, unless they are the wind back type like on some fords you will need a piston wind back tool these can be brought from repco.