Jump to content

4ABHGE's SX Track Hack


4ABHGE

Recommended Posts

Been looking for a second car for a while, it bit of an impulse buy that came up out of the blue, but its perfect and suits me well.

I lied its far from perfect but she'll be right! cant complain for the price :D

The car is an AE93 Corolla SX equipped with a 4AGE.

Current modifications include:

- Half the dash trim is silver (CARS I BUY, Y U NO ONE COLOUR INTERIOR?!!)

- Very very soft shockies on the verge of being blown

- Water pump which pumps water straight to the ground (Think of it like a Jet Ski...)

- Radiator hoses held by cable ties

- Duct tape holding drivers door trim in the correct position... kinda

- Blows more smoke than your Nan's chimney in the middle of winter!

Will get pics once the car is in my possession! ;)

Edited by 4ABHGE
Link to comment
Share on other sites


Had an awesome day which is a good change of events!

Started off with picking up the trailer with the mighty Brutus

7554594378_b271c65101_z.jpg

IMGP9616 by JustinLakos3, on Flickr

Picking up the beast from the other side of town

7554594634_1db1e17941_z.jpg

IMGP9619 by JustinLakos3, on Flickr

Some prick in a Corolla was stalking me all the way home... :P

7554594740_c0f5680612_z.jpg

IMGP9636 by JustinLakos3, on Flickr

Still there..

7554594892_b0f31bd517_z.jpg

IMGP9643 by JustinLakos3, on Flickr

Managed to get it home in one piece, and have a closer look... this car oozes the character of an 18yo who loved F&F! So many lols were had when assessing it a bit closer :lol:

Link to comment
Share on other sites

PICS:

Atleast shes straight..

7554597064_3f02349849_z.jpg

IMGP9675 by JustinLakos3, on Flickr

Dodgy foggies!

7554597732_81373b6c0a_z.jpg

IMGP9679 by JustinLakos3, on Flickr

Why shopping list? Because race car.

7554597296_7eeba96f25_z.jpg

IMGP9677 by JustinLakos3, on Flickr

Valve stem seals are gone methinks... she just spews oil and smoke!

7554595406_93c884020c_z.jpg

IMGP9663 by JustinLakos3, on Flickr

Engine bay is surprisingly clean and stock...

7554595708_6436ba45aa_z.jpg

IMGP9665 by JustinLakos3, on Flickr

Hang on... whats this red wire?

7554596284_d1a0172fb6_z.jpg

IMGP9667 by JustinLakos3, on Flickr

Goes up here...

7554596402_b69b1880e0_z.jpg

IMGP9668 by JustinLakos3, on Flickr

Aahh i see what you did there! hahaha

Water pump is goners and the temp soars right up right away, so it was closey monitored through this guage thing. Does the job!

7554594232_00c86ded48_z.jpg

IMGP9669 by JustinLakos3, on Flickr

While were in the interior lets have a browse..

It comes in a rare JDM colour... Super Sexy Silver! facepalm.jpg

7554595224_70f324e578_z.jpg

IMGP9660 by JustinLakos3, on Flickr

Because tape fixes everything, if it doesnt.. cable ties.

7554596774_cc71424a8c_z.jpg

IMGP9670 by JustinLakos3, on Flickr

So it has a short shifter, but the gear knob felt really weird... wasnt sure if it was because it was a disco ball or not so i sussed it out right away... pics do the rest of the talking.

7554596584_7c9cfc83b1_z.jpg

IMGP9673 by JustinLakos3, on Flickr

Nek minnit.

7554597182_f8e6f05159_z.jpg

IMGP9674 by JustinLakos3, on Flickr

BAHAHAHAHA

Edited by 4ABHGE
Link to comment
Share on other sites

what the fark

how was the gearknob held on? The steering wheel looks alright tho :)

Anyway looks like a nice little project, what's first on the agenda? waterpump?

Edited by Bristowe
Link to comment
Share on other sites

what the fark

how was the gearknob held on? The steering wheel looks alright tho :)

Anyway looks like a nice little project, what's first on the agenda? waterpump?

You see when the gear knob is off there is white tape all around the stick? yeah they just smashed the disco ball on to there and it stayed on. It felt real weird though, it was all wobbly!

Steering wheel will be going after the roady, ive got one from my old AE102 which will look the goods :spiteful:

Dunno, I might just go give it a good wash today and then start ripping the motor apart.

Edited by 4ABHGE
Link to comment
Share on other sites

I thought you had a rare JDM EP3 with a B18, not an EG?

Went wreckers today bought a few bits and bobs...

- CSi Black Front bumper

- New grill

- New front garnish thing

- Bottom half of dash in not-silver

- Glove box in not-silver

- Centre console in not-silver

- Air vents in not silver

- Standard front speakers

- Original SX head unit :D :D

- Stock gear stick

- Shifter boot in not-silver

- TEQ oil cap

- Left hand side mirror

All for 150 dorrahs!! :D :D :D

Link to comment
Share on other sites

Found out that the floor mats aren't plastic checker plate after all, but rather 100% legit JDM aluminum!!! hahaha

Seems as though at one point the car also had danger to the manifold and because of this the passenger side flew out of the floor... there are still remnants of tape/glue on the carpet that used to secure it down but the manifold just had way too much pressure.

The drivers side is near impossibru to take off and is pulling the rubber off of the carpet (the part where your shoes rest) Ill try and pry it off properly tomorrow and cover the damage with my SCA floor mats i purchased.

Im actually loving this car already! :D

Link to comment
Share on other sites

Todays news:

- Found $1.40 in the car

- I realised I had blue LED water jets... I also realised Jo wired them up so they are permanently on and draining my life/battery

- Car no longer has silver interior

- Car no longer has any interior

- Seats need a scrubbin

- Found lots of glass and sand - needed a bulldozer to clear it off all the carpet

- Aluminum floor mats removed and glue/tape taken off carpet

- Gear stick is back to stock

- Lots of dodgy wiring.... I mean lots.

- Central locking doesnt work on the front passenger door... -_-

Also has anyone removed the dash cluster before? I undid all the black screws in the white backing of the dash but it wont come out fully as if something is holding it back... any tips? I want to tackle the dash lighting while it is all apart.

Edited by 4ABHGE
Link to comment
Share on other sites

haven't missed a screw holding the cluster in? also needs jiggling. Lots of it.

Also all the wiring and speedo cable need to be disconnected? Maybe take the wheel off to give more room for said jiggling.

can you get it out far enough to get your arm/hand behind it?

Hopefully the dodginess doesn't extend to the cluster being glued in or some bs like that

Link to comment
Share on other sites

Also has anyone removed the dash cluster before? I undid all the black screws in the white backing of the dash but it wont come out fully as if something is holding it back... any tips? I want to tackle the dash lighting while it is all apart.

$1.40 ? cool, looks like you got your money back then :lol: Shame the wrecker didn't have silver trim so you could complete it, guess you'll have to settle for black then...

I'm guessing you spotted the screws above cluster holding the thin piece up there.. I think the only thing holding it in is the speedo cable now

Edit: David beat me to it

Link to comment
Share on other sites

Yeah spotted all 6 screws and removed them all.

Cant get my hand in far enough to remove said wiring.

Speedo cable is still attached, do i disconnect it somewhere down near the gearbox?

Thanks for the quick reply fellas!!

Link to comment
Share on other sites

Yeah spotted all 6 screws and removed them all.

Cant get my hand in far enough to remove said wiring.

Speedo cable is still attached, do i disconnect it somewhere down near the gearbox?

Thanks for the quick reply fellas!!

Oh yeah forgot bout that, yep undo the speedo cable in the bay and even push the cable thru the firewall a bit to get more room the get your hands behind the cluster

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Forums


News


Membership