My 1998 AE112 DIY audio install

[rayt32]

1998 AE112 stock front speaker

removing the rivets by using a drill or a ball chamfering tool in my case to remove the rivet head x3.

cut out the embossed speaker frame and cut out 25mm thick wood using a jig saw just to snugly fit on the speaker frame and tack it using a tack nails.

placing the 6.5 inch alpine speaker on the modified speaker frame to properly orient the screw where to mount it.

mounting the modified speaker frame on the door and screwing it on place mounting the speaker on the speaker frame but don't forget to make the necessary wire connnections.

Alpine mrxf30 amps that arrived that i bought from Sonic Electronix from the States, i was lucky when i was surfing the net they are on sale around 30% discount RRP. Channel 1 & 2I drive the two fronts speaker and bridge channel 3 and 4 to drive the subs.

making necessary wire connection to put a line output converter/ filter.

making preparation on the wirings before putting in the car. Each wire is tag where to be connected to avoid confusion during installation.

Alpine S type 6.5inch speaker that i use on the front.

Subwoofer box and 12 inch kenwood subwoofer speaker i got at a very discounted price before the demise of WOW sight and sounds