whitezr6
-
Posts
234 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Events
Gallery
Tutorials
News & Articles
Videos
Posts posted by whitezr6
-
-
cbf searching forums, but seems pedders coils are rebadged BC racing coilovers, $2k vs $1.2k
however with pedders you get local support if something goes wrong
correct me if i am wrong :)
-
push the black boot open button near the number plate, should open since key is right there?
edit - LOL
-
gates sells a adp for the 2gr-fe, if oem is too expensive
http://www.ebay.com.au/itm/301863737633?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
however I have not double checked if this is the exact same part as oem...
I would contact the seller first
-
ALTERNATOR DECOUPLER PULLEY??
There's a vid on YouTube showing what it sounds like when this part goes
Goodluck
-
1
-
-
not sure sorry, I only have experience with 2006-2008 aurions.
are these oem headlights?
you may need to adjust the beams
-
No worries, Altogether I have bought 4 kits lol, the last pair were the patent Phillip bulbs and hylux can bus ballast
-
I have bought the second HID kit it only lasted 1 year before the bulbs went, purchased another set from the same company, same thing
I purchased from this site at least 2-3 yrs ago, still going strong
http://www.point-blank.com.au/HID-Conversion-Kits.html
Edit
seems the top ebay kit is the same as the one from point-blank but cheaper
-
no worries
Before I got the 19x9.5 I was on BC racing coilovers
Before the coilovers I was running 20x8.5 et38 on stock shocks and pedders lowering springs
hope this helps
-
lowest part, exhaust I think is 100mm from the ground, so front side skirt is like 110mm from ground, and rear side skirt is 140mm from ground
sorry no idea how much of a drop from stuck as I had it low but had it raised 10mm, pedders installed the coils, there is a significant wheel and guard gap only on close up
-
19x9.5 +42 on 235/35 tyres :)
-
1
-
-
Wish i could but wheels are flush to the guards, I think anything above 245 would start rubbing :(
-
very nice, 11/10 :)
-
gf studies there :)
I drive everywhere just like you lol
-
I see you lol, you go to curtin?
-
hey mate, its 2 steps for me
when i start the engine/ignition on and wish to have the DRLs on, I have to turn the parkers on, then push the switch
thats how the auto-electrician wired it up
but if I had it dialled to parkers beforehand, and then started the engine/ignition on then the DRLs would also turn on
So if I had headlights on, I have the option of having the DRLs on or off, I tend to have them off when the headlights are on
generally I hardly have my DRLs on anyway lol
-
12" sub
Genuine look DRL switch
Red Hella Super tone horn speakers
Thats it for now :)
-
1
-
-
-
excellent!, cant go wrong with 5 spoke concaves
-
1
-
-
DBA 4000 crossdrilled and slotted rotors + QFM HPX pads all around
:)
-
-https://www.youtube.com/watch?v=gOJtmplXTg4
-bought from U.S. (supplier sent me a broken hose clamp, had to walk to bunnings so I could attach the pod filter lol)
-http://pbbrakes.com/brake-kits/toyota/aurion.html
have fun
-
good guy defyant
-
wish I had the $$$
only can dream
with 245/35 would the coils->tyre clearance be more than enough?
guards not rolled,currently no tyre->guard rubbing, dampeners are on setting 8 or 9 from hard
earlier the frame rails were 85mm(raised it 10mm, now want to re-lower 3-5mm) from the ground and didnt rub even with 5x65kg+ people in the car
245/35, not much bigger than 235/35 it seems
-
Hi all,
just a few questions on fitting tyres on my 2008 aurion zr6
Currently
235/35 on 19x9.5 et +42
running altenzo tyres
wheels sit flush to guards
Now I am looking at better performing tyres than the altenzos which were $196ea
Looking at spending $300-$400
However with the tyre size 235/35 there is no other tyre with a load rating of 93+ that I could find, vendors or internet
my dilemma is going upto 245/35r19 (plenty of 93+ load rating tyres)
with my current setup:
Rears: (fronts plenty of clearance)
Will I have any issues going from 235/35 --> 245/35?????
Also looking to lower till the frame rails are 100mm from the ground
Thanks for any advice/suggestions
Juan.
ps. looking at doing some test fitments at a local shop, just would like some/an idea's before booking it in
-
1
-
-
minor update:
just waiting for front and rear 4000 series cross-drilled and slotted dba's + qfm hpx pads from GSLrallysport :)
relowering by 4-5mm
thanks for viewing
-
2
-
Wheel fitment 19x9.5 et35 on XV40
in Aurion / TRD Aurion Club
Posted
this is 19x9.5 et42 245/35 tyres on coilovers
sat flush to guards
yours would stick out 7mm more
https://www.willtheyfit.com/index.php?width=245&aspect=35&diameter=19&wheelwidth=9.5&offset=42&width2=275&aspect2=35&wheel_size=19&wheel_width=9-5&offset2=35