Yeh well I was wondering what happened as it hard the worst case of blow by was coming out of everywhere oip pouring out the throttle body that's what my son said he was being silly and was reving it hard driving like a manual just hope the bore is OK
Definitely buy genuine DENSO brand sensors. Suggest that you contact this eBay seller and provide your VIN number.
This is a 2002 Corolla Seeker. There is a clicking sound just developed close to the steering wheel when driving around a corner. I want to get the plastic cover off the top of the column near the Steering wheel, to try and determine what’s causing it. Any guidance would be greatly appreciated. Cheers Jan
I have an Australian model 2003 Camry, with the v6 1mzfe engine. I am having trouble with my o2 sensors, and I could use some help.
First of all, my exhaust looks different from the Camrys I've seen online. It doesn't have catalytic converters right next to the engine, only one down further in the tailpipe. Also, it only has 2 o2 sensors, one for each bank of cylinders, and no sensor after the cat.
Both sensors are currently producing readouts of between 0.1 and 0.9 volts, like narrowband sensors, but people are saying they should be air fuel sensors which are 0v - 5v. The part number on the front sensor is 89465-40060 (rear one is hard to see).
The sensors are faulty (codes are po135 and po155) - both heaters aren't working, and I have checked the front one's heater wires, which are open circuit when tested with a multimeter - suggesting it is the sensor, not the wiring.
The car is using lots of fuel - 14l/100 in fairly relaxed driving.
I need to know, what sensors should I be buying?
- exhaust system is unusual
- exhaust sensors acting like narrowband but internet says they should be wideband A/F sensors
- car using lots of fuel
- please help