Jump to content

Recommended Posts

Posted

Hi, I have a 91 Townace, import, with the 2C-T motor, and the A44DL tranny. The engine revs to nearly redline before slamming into gear, I have flushed it with 16 litres of fluid, cleaned the pan, and the smallish filter i could find, looks to be lot of gear to remove on the bottom, to get to the bands, if there are any? anyone had expierience with these, I cant find much info on this model at all, thnaks.

  • 2 months later...
Posted
Hi, I have a 91 Townace, import, with the 2C-T motor, and the A44DL tranny. The engine revs to nearly redline before slamming into gear, I have flushed it with 16 litres of fluid, cleaned the pan, and the smallish filter i could find, looks to be lot of gear to remove on the bottom, to get to the bands, if there are any? anyone had expierience with these, I cant find much info on this model at all, thnaks.

Hi there

we have a 1990 model import townace with the 2C-T moter. We have had the same problem with the gearbox. We took it to a transmission place. They test drove it and said it was the cable that goes from the gearbox to the top of the motor. All it neede was an adjustment and now it runs beautifully. It took the mechanic less than a minute. I couldn't believe it. We also had it serviced. Only cost $113.50 all up. Apperently when a mechanic works on the engine they don't always know the right setting for this cable and normally just leave it which can sometimes put the gear changing out. Anyway hope it works for you too. Good luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership