does anyone know how to install light door sills camry 2007? help2

[efran]

--camry 07

hi.. does anyone know how to wired the cable properly, so when the door open the light on the door sills came on??

[poohbear]

--camry 07

hi.. does anyone know how to wired the cable properly, so when the door open the light on the door sills came on??

I used the ring illumination wire, just find it from the connector. Alternatively, you can use the one that powers the interior center light.

some pics: (this is a gen5 though, but should be similar)

[efran]

hi thx for the advice, but could you please upload the clear picture or diagram, coz i'm totally no idea which wire it is(interior center light),, i was try to wired cable from the door sills which is the red and the red black one to the button doors cable and the light doesn't came on,,

i'm totally definitely blank about car electrical but wont spend my bucks to the workshop to installed better try first by my self

thx mate

[poohbear]

hi thx for the advice, but could you please upload the clear picture or diagram, coz i'm totally no idea which wire it is(interior center light),, i was try to wired cable from the door sills which is the red and the red black one to the button doors cable and the light doesn't came on,,

i'm totally definitely blank about car electrical but wont spend my bucks to the workshop to installed better try first by my self

thx mate

Ok when i get a chance, i'll take a photo.

Just hope that the wires are the same on the Gen6.

Do you have a multimeter? You can just get the harness behind the key insert and measure the voltage of each socket until you find one that gives you 12VDC when the door is open.