Jump to content

Painting and Prep - Eyelids and Grille


Recommended Posts

Hi Guys,

Just bought a grille and some eyelids for my 03 stivo...

just wanted to know if anyone would like to walk me through the prep and painting they went through?

also planning on doing the rear mud flaps.

tips and tricks appreciated.

regards

Andy.

Before i get flamed... i searched... there's about a zillion posts on painiting calipers.

Link to comment
Share on other sites

I don't think many people painted the eyelids or grills themselves. They usually took them to a panel beater who can match your car color and got them to paint them. Usually doesn't cost much

about $30 for eyelids and $30 for the grill.

Link to comment
Share on other sites

I don't think many people painted the eyelids or grills themselves. They usually took them to a panel beater who can match your car color and got them to paint them. Usually doesn't cost much

about $30 for eyelids and $30 for the grill.

oh right? well... i might just get the paint code from the chassis and paint them myself.

i figure primer + paint + clear... see how we do.

Link to comment
Share on other sites

I did it myself

Here goes:

They came unpainted so I had to sand it down, and prime it, 3 layers of primer and alot of sanding!

primerrp8.jpg

Then 2 layers of some Random Red I found at home, couldnt be bothered leaving the hosue

It's Centre Red, turned out to match the colour of my car pretty well, i would of done more layers but i ran out of paint.

redje3.jpg

Last came 3 clear coats with sanding in between to get a smooth finish, pretty happy with it, just got annoyed i was doing it outside so dust and glass did fall onto them. You can see that i did one better than the other...

Mounting tape, this stuff is actually pretty strong!

stickerslo3.jpg

Final product

eyelids2no9.jpg

Use a rough sandpaper when its raw to smooth it out, but before you prime it swtich to a finer one, give it a wet sand with some really fine paper between coats.

try to do it when airtemps are not so cold, the paint comes out more even

i did this when i was sick at home one day, turned out pretty good, i would of left it as is, but had a little bump a few days later and the panel beaters repainted it for me

Edited by bonbon-2zzge
Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Drive shafts

    2. 0

      FUSE BOXES ALLOCATION - 1996 SUPER CUSTOM Model (Import)

    3. 10

      Vibration through body (not steering wheel) under acceleration

    4. 0

      possible fit 2015 kluger Grnde driver seat on 2019 kluger GX

    5. 0

      front brake calipers

    6. 1

      Drive shafts

    7. 315

      New to Toyota - 2005 Corolla Sportivo!

    8. 10

      Vibration through body (not steering wheel) under acceleration

    9. 0

      P0420 Catalystic converter below Thrushold

    10. 0

      Dashlight dimmer

×
×
  • Create New...

Forums


News


Membership