Jump to content

19" rims

FoxV35

By FoxV35
in Aurion / TRD Aurion Club

 Share

Recommended Posts


Styles Rising Star

Styles

Posted
Posted
hey guys,

just wondering what's the offset range for 2008 aurion? also what's the widest we can go? and the spoke please.

anyone selling a good set?

thanks

hi..

You should probably read the TOCAU Aurion Faq.. That should answer your questions..

Link to comment
Share on other sites
DJKOR Grand Master

DJKOR

Posted
Posted

The maximum rim width is partially dependent on the offset that you choose. The combination of width and offset also is dependent of how much you plan to lower your car by.

You really should have looked around first before creating a new thread. Welcome to the forums by the way.

Not far down from this thread, there is one which has already been started and could have been asked there:

Wheels for aurion

Anyways, it's hard to specify a specific range because there are variables that can affect the outcome. Most people here choose to go for a maximum of 8.5 to 9 inch wide rim though with an offset between +40mm and +45mm. You can even manage to put 9.5 inch wide on the rear if you want that staggered look, but this requires a little bit of effort. When getting this, you should try to stick as close to the factory offset of +45mm. The following calculator helps to give you an idea if you want to calculate clearances:

Wheel Offset Calculator

But as mentioned, it all depends on how you set up your car. If you want wide wheels, you have to get the offset so that it doesn't stick out too far and scrub. But then again, if you have the facilities, you can make wide rims (like 9.5 inch at t he front and 10 inch in the rear) fit as well:

-INDOMI- 06 Camry with 20x9.5 +16(F) & 20x10 +10®

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      What can cause 2x bolts Missing on break calipers?

      Hi All, I have sent my car to a local mechanism shop as I heard a big scary clunk noise from the front left wheel part recently. And a huge surprise came back to me is, they told me that my break calipers has two bolts missing. I don’t think it is a common problem caused by daily routine driving. So really need to find out what was happened to that 2 bolts?! How lucky I was for driving nearly half a year without a tight break!! I even have kids on my car… can’t think more now. It’s terrifying 😱
      EmmNa in Corolla / Corolla Sportivo Club
    2. 10

      Engine Immobiliser

      Hi Chris, I would suggest getting a code scan as well mate as it could be something locking out the security starting process, and it may make tracking it down faster for you maybe worth the fee for a mobile mechanic who can do that for you as I doubt it will be a fuse or relay causing it sounds,like something in the security side of the process. I am sure if any others have ideas they will post it, these are just guesses on my part so I hope you get it sorted fast mate KAA
      KAA in Aurion / TRD Aurion Club
    3. 1

      Hello Toyota Club AU

      Welcome to the forum Dan, I hope you can find your answers for your Yaris KAA
      KAA in New Members Introductions
    4. 0

      Fuse boxes info

      I have a Toyota tarago 2002 acr30. I'm trying to find out where I can get the contents list of all the items in the fuse boxes. I think it has 4. I only have one cover in the engine bay fuse box. The other three have no information anywhere. Need to know what the items ( fuses, relays ) are for ?? If anyone can help would be a nights sleep for me..
      Homeless2012 in Tarago Club
    5. 0

      Rav4 Nightmare After Dodgy Mechanic

      Hey everyone, hope you're doing well! Unlike me and my Toyota, which is currently in a bit of a mess, haha. I'm reaching out for some help, feeling pretty desperate, to be honest. My 2013 Rav4 2AD-FTV Turbo Diesel is on the verge of being a total loss thanks to a dodgy mechanic who really messed things up. My car's was pristine, but then it blew the head gasket. I acted quickly, called up a mechanic recommended by a friend, and he towed my car away promising to assess the damage. He later reported that the engine was still in great shape but needed the head gasket reshaped to fix the issue. Weeks turned into months, and despite numerous promises and missed deadlines, my car remained in the shop. The mechanic stopped answering my calls or messages, and when I finally tracked down my car, it was sitting outside another workshop, unable to start. Cut to now, after seeking help from a reputable diesel specialist, they've replaced seals, checked compression, swapped injectors, and pretty much everything possible. But my car still struggles to idle, and they suspect the previous mechanic may have messed up something electronic or electrical. I'm at my wit's end. No auto electrician seems willing to touch it, fearing it's a money pit with no guarantee of success. It's incredibly frustrating, especially considering I may lose the car. Any advice or suggestions would be greatly appreciated. Thanks in advance!
      pts41 in RAV4 Club
    6. 0

      Door seals - causing internal leak

      Hi experts need some help. I have a 2004 Sahara 100series. With all this rain we are having my car has started leaking. It was my father in laws car. It’s leaking water down the pillar trim where the handle is inside front seats onto the dash, down the side of airbag and glovebox and dripping from corner foot area where dash ends and onto the floor. I can see the seal on the roof above the door has a gap in it. Could this be it? 1Q. Who would I get to look at this? 2Q. Anyone had this issue before? 3Q. Where do I begin. Thanks in advance, Sarah IMG_3589.mov
      LC100Sahara2004 in Landcruiser Club
    7. 0

      Need Advice please

      Hi, can anyone tell me if the shocks from a camry 2011 fit a 2013 camry? Also my car surges while i accelerate, ive changed the fuel pump and filter still does it, im wondering it could be the fuel injectors? Are they easy to clean?
      Atara in Camry Club
    8. 19

      FUEL WARNING MESSAGE

      Kanga, You wouldn't believe it, I found a pump at a Victorian wrecker. He posted it to me but to the wrong address. It was 10 days before I found this out. I went to the wrong address and they said the didn't see it. Austpost is adamant it was delivered. The wrecker fortunately has another one. So, I haven't taken the old one out yet.
      GeoffW in Landcruiser Club
    9. 19

      FUEL WARNING MESSAGE

      I was hoping for a trivial issue like a blockage, but seems Im out of luck....
      KangaRooted in Landcruiser Club
    10. 19

      FUEL WARNING MESSAGE

      Just tested before - I think its dead. No noise - nothing. I also note that the power supply I have actually delivers a really high-pitched noise when it is on. When you connect it to something, that noise goes away. In this case, when I connect to the terminals, the noise remains. I'm going to have to get inside to look further. Unfortunately, I simply don't have the room to do a job like that. Geoff, did you have any luck getting yours out through the inspection hole mate? I'd seen a few Lexus owners actually cut the inspection hole to get this part out without dropping the tank. Each to their own, but I'm looking to avoid anything that invasive....
      KangaRooted in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership