Jump to content


ZRE JDM Tail light globe switch


Recommended Posts

i dont know what types of bulbs i have for the park-or brake lights....

Today I found out. The parker globe is 5w and looks like this:

143300.jpg

The brake globe is 16w and looks like this:

Wedge-Bulbs-W16W-T15-.jpg

Now just have to find the same globes with each others' wattages...

I believe that there is huge amount of 5w bulbs with "glass" base like in the

second pic. But not sure how easy it will be to find 16w bulbs with metallic base.

Does anyone know if it's okay to put for example 20w bulb instead of 16w? Will the

smaller or higher wattage have any effect besides brighter/darker light?

Best regards, Alex

Edited by alex-C
Link to comment
Share on other sites

  • 3 months later...

Just thought i would update this thread.

I decided to install the 8w T10's in my swapped parkers as i mentioned previously in this thread. One of them has recently popped. Im not sure if its was a dud bulb, or the 8 watters arnt meant to be run all day (i use my parkers all day) as they were taken from the map lights in the forward dome. When i removed the popped bulb, there was minor scorch marks on the bulb holder. I assume this may have been from the hotter running 8w, but the 8w that was still ok showed no sign of scorch on the holder. Swapped back to 5w for now. Might go for some SMD t10's down the line..

Just thought i would mention this in case others followed my suit with the 8w T10's.

Link to comment
Share on other sites

Just thought i would update this thread.

I decided to install the 8w T10's in my swapped parkers as i mentioned previously in this thread. One of them has recently popped. Im not sure if its was a dud bulb, or the 8 watters arnt meant to be run all day (i use my parkers all day) as they were taken from the map lights in the forward dome. When i removed the popped bulb, there was minor scorch marks on the bulb holder. I assume this may have been from the hotter running 8w, but the 8w that was still ok showed no sign of scorch on the holder. Swapped back to 5w for now. Might go for some SMD t10's down the line..

Just thought i would mention this in case others followed my suit with the 8w T10's.

i thought you're using the aftermarket led taillights?

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Rav4 smart key keyless entry

    2. 0

      What do I need to change for a 2.5in lift n70

    3. 1

      2005 Toyota Camry Altise - changing transmission fluid?

    4. 13

      Starter motor issues

    5. 0

      Dangerous rogue dash speaker reflection

    6. 0

      Mountain Top Roll Cover + Tub Rack

    7. 3

      2019 Kluger 2WD Transmission whine

    8. 3

      2019 Kluger 2WD Transmission whine

×
×
  • Create New...

Forums


News


Membership