Jump to content

Recommended Posts

Posted

Things I have acquired and now wanting to part out:

P1 Geniune BuddyClub 15" Gunmetal grey rims - Willing to swap for Stockies or $650
Specs of wheel: 15x6.5 +42. Running 205/50 back tyres and 205/55 front

(One has slight paint chip, oter than that good condition)

Wingtips - 100

(Silver in colour, abit of faded otherwise good condition)

Trd grill - $100

(Painted black, has 1 missing clip but hold strongs still)

Eyelids - $60

(Painted in silver, a few stone chips)

Rear lip - $225

(Painted in silver, has paint chips, will need to be painted regardless)

Generic Brand Cold Air Intake w/ 3A racing pod -$200

(Painted black with paint scuffs when installing, othersise good, no damages, straight)

MWR Short shifter $80

(Good condition)

Replica weathershields - $50

(Will need 3M tape otherwise good condition)

HID 4300k - $65

(Good condition 3 months old)

Pedder springs w/ aftermarket struts $400

(Springs and struts still in good working condition, no noises or such as)

Camcon piggyback - $250

(Tunes vvt/airflow and ful ratio, will need to be wired up to ecu)

Black bennen towhook - $30

(Has a flat surface due to car being low ;) )

2.5" Full exhaust CUSTOM MADNREL BENT (Hurricane headers, hiflow cat, megan twin twip exhaust) - $1000

(In good condition, cost me and arm and leg for this, willing to let it go for cheap, megan twin twip was sent from the US)

Whiteline front tower bar - 180

(Good wokring condition, no bends)

Replica SR3 Recaro's w/ Kyoyo rails to suit ZZE models - $ 750

(Good condition, a few little dirt stains but won't realise till you eye the **** out of it)


Loacted Victoria, Victorian buyers get first priority. Can ship as well but at buyers expense.
Prices can be slighty negotiable. This is just roughly priced.



We all know how they look like so no pictures are needed. And I don't know how to put pictures on Tocau thread anyway.
Cheers fellas.
Jimmy




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership