Wanting to Install Corolla side skirts - need some help

[C-rolla]

Hey Guys,

I've had a search a few times but can't find exactly what I'm looking for.

I want to install a set of sportivo side skirts on my ascent but don't have the "fitting kit"

(Toyota don't sell the fitting kit separately - I've asked)

What I'd like to know is:

- What bolts/grommets/screws/seals/double sided tape do I need?

- or does anyone have a set of installation instructions for this?

- is there a tutorial on how to install? if there is I couldn't find it.

Cheers guys.

C-rolla.

Edited February 26, 2014 by C-rolla

[jeffy]

2 screws for the wheel arch

and then sikaflex

[C-rolla]

thanks for replying,

so your saying:

2 x 10mm bolts into each arch

+

Sikaflex-227 down the length of the skirts?

cheers mate.

[GHOSTIVO]

Correct, remember to put 2 x 10mm bolts on front wheel arch and 2 x10mm on rear arch.

[C-rolla]

Awesome mate. Thank you. Any other tips/tricks or things to look out for?

[C-rolla]

Awesome mate. Thank you. Any other tips/tricks or things to look out for?

[GHOSTIVO]

Awesome mate. Thank you. Any other tips/tricks or things to look out for?

At the bottom of the sill panel (where your going to put the side skirts) is there a black plastic thing on the ascent?

If yes take that off, there should be 3 to 4 black round plastic clip holding it in. U can use them to hold up the side skirts if you don't want to use sikaflex.

Cause I remember looking underneath of a ascent at work and sportivo has the same holes from memory.

Edited February 27, 2014 by GHOSTIVO