Jump to content


Recommended Posts

Posted

Hi all,

just a few questions on fitting tyres on my 2008 aurion zr6

Currently

235/35 on 19x9.5 et +42

running altenzo tyres

wheels sit flush to guards

Now I am looking at better performing tyres than the altenzos which were $196ea

Looking at spending $300-$400

However with the tyre size 235/35 there is no other tyre with a load rating of 93+ that I could find, vendors or internet

my dilemma is going upto 245/35r19 (plenty of 93+ load rating tyres)

with my current setup:

Rears: (fronts plenty of clearance)

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/q83/s720x720/10361597_10202578477077314_1038612881821041753_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/q71/s720x720/10325271_10202578476077289_9094858899292073190_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/q71/s720x720/10306084_10202578475997287_8694977119120273322_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/t1.0-9/q79/s720x720/10325790_10202578476437298_1158686365089823001_n.jpg

Will I have any issues going from 235/35 --> 245/35?????

Also looking to lower till the frame rails are 100mm from the ground

Thanks for any advice/suggestions

Juan.

ps. looking at doing some test fitments at a local shop, just would like some/an idea's before booking it in

  • Like 1

Posted

Bags. Airbags.

also, i dont see why you would have a problem. Getting 245 will get rid off some of that stretch.

Unless you're worried about rubbing ? Are your guards rolled ?

Posted

wish I had the $$$

only can dream

with 245/35 would the coils->tyre clearance be more than enough?

guards not rolled,currently no tyre->guard rubbing, dampeners are on setting 8 or 9 from hard

earlier the frame rails were 85mm(raised it 10mm, now want to re-lower 3-5mm) from the ground and didnt rub even with 5x65kg+ people in the car

http://www.willtheyfit.com/index.php?width=235&aspect=35&diameter=19&wheelwidth=9.5&offset=42&width2=245&aspect2=35&diameter2=19&wheelwidth2=9.5&offset2=42#content

245/35, not much bigger than 235/35 it seems

  • 3 months later...
Posted

Even 8.5" wide 235 is too skinny. for 9.5" i'd go 265/275.


Posted

Wish i could but wheels are flush to the guards, I think anything above 245 would start rubbing :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...

Forums


News


Membership