Jump to content

Recommended Posts

Posted

Hello, new to the forum. I have a 2004 Hilux KZN165R with the 1KZ-TE engine that has lost all the coolant from the overflow container since I topped it up 5 days ago. I had a look and most of it leaked onto the road. I can't drive over 30 km/h without the temperature gauge shooting up to nearly in the red. I had a look at other posts and they seem to suggest a broken head gasket and to look for bubbling in the radiator. Not exactly sure what that means. Here's what I can see of the leak in my radiator.

IMG_1504.jpg?ex=671995bc&is=6718443c&hm=17b7504070166cba6f48889ec69937cd2f8605e40ecc2c085136237836ad51c8&


Posted

Hi Alex,

Are you absolutely sure that it is leaking, like have you seen coolant anywhere? The 1995 Hi Ace, I bought< went through coolant all the time, I was forever topping it up. For some dumb reason, I had a good look at the radiator cap, and found that the rubber seal was as stiff as a board. A new cap solved the losing coolant issue.

 

Herb

Posted

Hi Herb,

Yeah, I had a look under the car and saw a big puddle of fluid about the size of a large Domino's pizza. I crawled underneath to see what I could see and saw fluid dripping from my bash plate so I traced the dried/stained fluid up the side of the bash plate to the bottom of the radiator. I had a good look at the radiator and saw what I took in the picture I posted earlier.

I had a good look at all the hoses and pipes and couldn't see any cracks at all. Same with the caps for the fluid tanks.

Cheers,

Alex

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership