Danthuyer

I think the one on the left was a 200sx or a 180 and the one on the right is a forrester GT (look at his 60 FT )

there were a fair few silvias and 180's there this night...some fast ..others not so fast....but a fun night all the same in the rolla ;)

shop around

←

Soz my bad warwick forgot that your in here now also ;)

as per wawrick ...shop around ;)

good point from zee - but only time will tell :)

but its thx to forums like this and our thirst for knowledge about our beloved cars that makes the newer models coming out hopefully better through our heataches :D

Thx to you all again for all the well wishes and praise.

This has been one of my goals for a while now...and I finally managed to put it all together....even though Dave beat me to the goal, it's great to have a little rivalry bewteen states ;)

Zee - good point!!!! any VIC people pushing over 120 yet??? or into the 14's ??? :P

attached is finally the scan of the time slips :D...sorry but no video as I said before this was a spurr of the moment thing ...sorry guys..I will get some soon when im into the 13's :P

shhhh....azza dont tell Xanthe ;)

hahah now there is one HOT chick!!!!!

yer i spose ill go ;)

im there tonight

Congrats Craig you spam posting forum whore.

You are now officially annoying as that f*cking crazy frog ring tone.

←

LMAO

YAY! another Stivo in our little following...

enjoy the rush!!

" hi my names Craig ....and I'm a lift aholic :D "

hey guys...finally got my ADSL turned on again so i can reply.

Thx for all the thumbs up.....I have been wanting this for a while...and then Dave beat me to it

But now the bar has been set a little lower. so the challenge is out there for anyone to get into the 14.7's???????

Unfortunatley this was a spurr of the moment descision and no one else came with me...so all I have is the time slips...I will scan them in asap for you all ;)

Ciao

Sads

just a reminder to people

READ THE STICKY POSTS FIRST

and also try searching...its amazing what you can find in there ;)

1000 Posts

Can you beleive it?????????

I'd like to thank everyone over the past year/s for all their efforts in the forums.

Huge thx to Steve and Matt for all their hard work in getting the garage and gallery implemented and general stuff around the shops in not only here but TOC and TOCUSA

Big thx to all who post and contribute with interesting articles and tid bits on what to do and what not to do.

And to those who just take up room and air (dylan) :P thx for nothin' :P

I think I might retire now ...hahahaaaaaaa

unless ol man rent a cop tells us otherwise soon :P

Yeah I'm racing another mate from 'Velocity Import Performance' in his Turbo'd 1JZ Soarer

I won the first race - with bad start nad lost the second - bad 1-2

This event was at what we call a test'n'tune meet which is held every week to 2 weeks at Willowbank Raceway which is to the west of brisbane as Azza pointed out.

It costs $34 to race (as many time as you can fit in from 4.30 - 9.30) and that fee also allows an extra person in the door.

alot of fun :D

hi guys,

i'm d_mn interested in getting a unichip for my new car. i'll get my car this friday,.. yahoo...

i am not very experienced with all this, so please bear with my stupidity. according to Danthuyer, this unichip could be tuned so that the engine produces more torque at lower rev, right? can you tell me what parameters need to be adjusted to achieve this and what is the optimal setting for this?

is there any difference in price between 16bit and 32bit chips?

i reckon if i paid another 1k to get 12 kw on the wheel and more torque during low rev, it's worth it, isn't it?

thanks

←

Have a search around the forums and you'll find a bit of info on this topic.

basically you tune ignition timing and other settings with the chip to make the car run more efficient. this takes a few hours on a dyno machine and the end results are varied pending on who when and where you get the tune done.

32Bit chip has more tuning points from what I hear?

Its a personal choice if it is worth it....you can pay 1300$ for a set of headers and get only 5kW or you could spend similar money on a unichip and get 10kW ???

see its not just the unemployed dave :P :P :P :P

Steve/Matt any updates on this?

for shizzeles. i'll be there in my entertaining state. possible nudity and perversion may also be present.... :D

←

Possible nudity???? Don't know that I want to see Craig in his birthday suit although it"s his birthday. My eyesight is too precious!!!!

MMM Not good thoughts something along the line of Monty burns in the buff :o :o

←

So you coming brenden or not??? :P

getting closer ;)

Hi all, just found these forums, seems like a good idea, haven't been able to find anyother forums that has people modding newish cars, great work guys! My Corolla is nothing too spesh.

Pics

Clicky clicky

Mods:

16" Advanti chrome rims (dunno the name, couldn't care to much either way)

Hankook Sport K104 205/45Z/R16 tyres

Momo gear knob

Pioneer Mp3 headunit

Front speakers : Cadence 6" splits

Rear Speakers: Blaupunkt 6" splits (comp. grade)

Sub: Pov pack 12" Pioneer (pre-boxed POS)

Amps: 1600 watt Audiopipe (for more and better subs eventually)

          480  watt Coustik (running the splits)

Very flaming loud B)

Oh well have a good one all.

Andrew

←

Welcome Andrew :D

looks like your into your audio gear pretty well huh!? excellent

so where abouts are you from ???

any more plans for the rolla?

yeah there is shao,

its a tight circuit which involves starting at the entrance to milton maccas and proceeding through the crowd of habibs and their fully sik rexies then turning left onto milton road and hitting lift just before u reach the set of lights where u do a hard left then back on the gas into lift, slow for another hard left then watch the bumpy road and more habibs as u approach the entrance to the maccas again. 

←

Or you could always negotiate the slalom course at the dat#3 carpark...the only issue is concrete poles arent too forgiving on your bodywork :(

Download doesnt seem to work, takes you to a rapid share page and sits there doing nothing. If you want it hosted let me know, you can email it to me then I can whack it on Ausxbox for you :)

←

I just tested it and its fine...once you click on the link..select the type of download....free or premium...then wait 30 seconds and the link appears at the bottom ;)

I cant email as im only on dialup :(

Video Footage

This was taken by a friend of mine the other saturday night.

When you go to the page you have to select the free usage...then wait for the page to load (about 30 seconds) then click on the download link

WARNING file is 11 Meg

1st run - too much wheel spin off line :( a 2.6sec 60 ft (but landed 1-2)

2nd run - great launch :) (but missed 1-2 :( )

Enjoy :D

Steve - Still no space available to add attachments :( *starts to cry