Romp

It's turboed guys. Running a WRX turbo. Pretty much custom everything from the ground up!

Very cool to cruise with.

A Corolla with a blow off valve turns alot of heads!

i liek ur car mick

i not a fan of that turbo rolla rims tho !

id liek to have a ride tho!

really?? ... but wont the letters lose the adhesive when its wet ????

yer it wont be as permanent - but it stays on

ive got a sticker atm that is just a vinyl and it stays on - no adhesive

and it think once ur one with adhesive dries itll be sweet

Anyone else wanna confirm?

I got mine on. off center and not straight. and to top it off there are bubbles underneath... hrmm

guys use soapy water underneath before u put them on !!!!

then u can iron out the bubbles AND move it to the right spot without fudging it!

lol

its not that type of sticker ... this is on the outside ...

iniff - ... hmm maybe I also forgot to mention . before peeling anything off .... I used sticky tape to find the right position ... so I could stand back and have a look ... once you find the right position ... then I used some chalk to draw the line where i wanted it ..

then peel and stick according to the line ...

and use a credit card for bubbles ... take your time ..

sorry for not telling earlier .. i knew I forgot to post something ... though I already did it ...

yer i know its on the outside.. same rule applies

ever watched them apply window tint? its basically a sheet of darkened plastic with adhesive

they spray the window with soapy water then squeegee it out. the adhesive dries and bonds to the window .. just leave it in the sun after ur done or use a hairdryer - but dont leave the hairdryer on too long or the sticker will shrink and curl

they are but they look ugly In my own opinion...

then again every person have diferent taste :D

i agree - im not a fan of the altezzas

the dark looking ones are pretty cool tho.

But i like the jap standard style ones best (one with the lines)

Niiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiice!!!!

Man they are HOT!

what springs/coilovers u using?

I got mine on. off center and not straight. and to top it off there are bubbles underneath... hrmm

guys use soapy water underneath before u put them on !!!!

then u can iron out the bubbles AND move it to the right spot without fudging it!

lol

ok then!

i was considering getting a front spoiler from them! i think il take my chances else where. More than likely toyota! <_<

i want a front lip - i aint paying $650 for one tho lol

mate getting around the immobolisher is easy , just get are ecu from the us,make sure u get 00, 01 model as it has are higher rpm(8400) problem solved, wiring shouldn,t be that hard, since the echo has vvti, so it will be missing the wires for the all important lift, so probably end up using the echo harness, but im finding it hard to believe u got are 2zz with gearbox for 2500, when i was looking for mine, u couldn't touch it under 4k just for engine, and who is doing the install for 4k(got are name of the shop and number),1 week yeah right,i bet money on it, just waiting for custom stuff to come will pass that.

anyway gl

Looks like not much room to spare in that echo:)

yer these things always take longer and cost more !

i parked about 10 spot away from you on the right hand side. my mate said he recognised your car on forum but forgot your name.

SYDNEY

Silver pre facelift, grill I think chrome 17s and a sunroof driven by a lady with one of those muslim head dresses.

Love you sunroof! im jealous!

Was turning off homebush drive onto the bankstwon turnoff before the overpass to the south.

I think its milperra rd?

Parts have been ordered and latest news was that a fair part of the order had to come from Japan as we basically cleaned out what they had in NZ.

ETA?

PM sent regarding credit...

guys they are all busted or at least scratched according to Northy - he will credit ya up

blow the exhaust on it for a bit to warm the plastic up and cut it with a Stanley knife...

use one of those thin coping saws .. i think its called coping saw ... it looks like a letter D with a thin blade inside and its serrated .. it allows u to cut smooth shapes rather than straight lines... use wet and dry sandpaper to sand back any rough bits afterwards

and yes.. leave ur car exhaust blowing for a while to heat the plastic!

Hope that helps

Painting mudflaps... I think I might do that as well! :D

Let us know how you go Romp. :)

alright - gimme a few weeks tho - heaps bsuy at the moment

Ill try to take pics but my digi cam is old and crappy:)

im no motor sparky! so i might need help on installation! im keen Dan!

PAID 8:40am

I pm'ed you the details of where i want it shipped mate. For the 6000K kit for my rolla.

Cheers

PS - Corzza this kit is simple to install its plug n play. Should take 15mins for a newbie

yep, autobarn sell it all. Also get some prepsol to clean the surface of everything.

if its gonna cost close to $100 might as well get them done professionally.

nah coz if that goes well then ill do my front undergarnish as well

yep, it's easy to do. Just remember the finish you get will come down to your prep work.

You can buy custom-mix spray packs from autobarn for $26ea, one will do a set of mudflaps easily. I've done a whole bumper with two of them a couple of years ago.

Get the paint guys to put some flex-add into the paint so it had a bit of flex in it and wont crack, and use plastic bumper primer to prime the mudflaps after scuffing them with the scotch-brite pads or 800 grit wet/dry.

I give them a couple of coats of bumper prime then rub them back lightly with the 800 wet/dry so the colour coat can key properly to the smooth primer. After a couple of coats of the colour, I then give 5 or 6 coats of clear... Should turn out very nice. Just dont put the colour on too thick like pippy ;)

Sweet thanks man

Autobarn sell all that stuff right? i might as well give it a go

Would you have an instruction book you can post?

Not sure where that black box in the picture is susposed to connect.

When you say "There's 1 set of H4, and 1 set of H7's" does that mean for each pack that is sent out?

Anyone had experience with these Techone kits before I go and buy one?

Cheers

PM me if its negative:)

Hey guys

Wanna paint my rear mudflaps.

They are only small - so I thought I could buy a spray can and do them myself.

Anyone know if it will look shiet? or woul dbe ok since its a small piece.

Also what paint would i use ?

cheers

Mah gawd Habib! that price sounds goooddd,,, :o

but do you have any H3 kit ?????

if so , tell please, I'm up for one !

Where are these made?

Will they fit low beams on the rolla?

Does it come with bulbs and ballast?

Better than the other group buy ones? :)

If so I will put name down for 6000K ta

what about 5000K??

4800K is optimum temp for HID

but im willing to get 6000K for that price if its reasonable

I will be picking these up this sat ... If people wanna meet at the usual spot at about 8:20pm im more than happy to do that. As i usually leave greenacre about 7:45pm on a sat so no one stress if im not there at 8:20pm on the dot i will be there.

So people that want to pick them up ill be @ the usual meeting spot from 8:20pm or so and ill hang around for an hour or so.

If you dont come past it will have to wait till the monthly meet unless you can catch me at chatswood where i work.

cheers

Bill

Ill swing past chatswood next week

Cheers

how hard are these to install ..

id be interested ...

What brand are these?

Id be interested in 6000K unless u can get 4800-5000k :)

Cheers

packaged has just shown up and is pretty knocked around and some of the weather sheilds are busted, so if all those who sent me money please send me a PM and ill be crediting the funds back into your accounts.

PM sent

any chance of a photo that does a bit more justice to the tints? i dont really follow what u mean with this metalised thing

the tint is coloured by using metal instead of black dye. So it looks slightly reflective - not mirror tint tho.

When you go to get your tints done the guy has all the tints on his Maloo - u can check em out to see which u like best.

illegal would i be correct. Had much trouble with the good guys about it?

thanks for the number mate

yup illegal - i got metalised so its not noticeable that its really dark

no trouble from pigs - but i can see out of it with no dramas.. and at night its clear too

35% is the legal limit