Jump to content


Recommended Posts

Posted

have a 99 camry csx old remote busted so bought new remote from toyota ,cheap, but need to program it ,does anyone have the proceedure to progam it and remove the horn chirp,much appreciated.

Posted

They're in your book.

Ill try to explain my best, It has been quite some time since I reprogrammed my remote.

1) Turn the key to ACC (3 times , as quick as possible)

2) when you have done this right, the Security light will light up longer than usuall

im not sure the next step I forgot...

I think you press the unlock button (the button near your mirror switch), and press the remote and do the same for the lock button.

let me know how it goes.....I'll try to find the info for you.

Posted (edited)

close to what leasaunce said, is how i did mine.

Program remote:

1) Turn the key to ACC (3 times , as quick as possible)

2) when you have done this right, the Security light will light up longer than usuall

3) press the remote button, if you have 2 remotes you need to press them one after each other. Otherwise one of them will not work. so do all key remotes in one procedure. If it is successfull I think the blinkers flash.

Turn off horn chirp:

1) Turn the key to ACC (3 times , as quick as possible)

2) when you have done this right, the Security light will light up longer than usuall

3) press horn. it should chirp or flash the blinkers

This worked on my 99 Conquest.

Edited by BlindEyeSight

Posted

close to what leasaunce said, is how i did mine.

Program remote:

1) Turn the key to ACC (3 times , as quick as possible)

2) when you have done this right, the Security light will light up longer than usuall

3) press the remote button, if you have 2 remotes you need to press them one after each other. Otherwise one of them will not work. so do all key remotes in one procedure. If it is successfull I think the blinkers flash.

Turn off horn chirp:

1) Turn the key to ACC (3 times , as quick as possible)

2) when you have done this right, the Security light will light up longer than usuall

3) press horn. it should chirp or flash the blinkers

This worked on my 99 Conquest.

this is the correct way to do it.

  • 2 weeks later...
Posted
how much is the single button remote cost from toyota? anyone know....

the single button remote costs around $35au from toyota,cheap!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership