Jump to content

tacho / speed calculator

shaohaok
 Share

Recommended Posts



xoom Grand Master

xoom

Posted
Posted

hmmm thats very interesting shao as it indicates that at 8200 rpm's the car is doing over 100km/h in second.... Im gonna have to head out and take a look at this again ;) ;) ;)

Also without starting up the whole cut out debate on my last dyno run it wasnt cutting out according to the print out until exatly 8350 :ph34r::ph34r::ph34r::ph34r: hmmmm interesting .....

shaohaok Grand Master

shaohaok

Posted
  • Author
Posted
hmmm thats very interesting shao as it indicates that at 8200 rpm's the car is doing over 100km/h in second.... Im gonna have to head out and take a look at this again ;) ;) ;)

Also without starting up the whole cut out debate on my last dyno run it wasnt cutting out according to the print out until exatly 8350  :ph34r:  :ph34r:  :ph34r:  :ph34r:  hmmmm interesting .....

i've had mine cutout at 8445 before.

Danthuyer Grand Master

Danthuyer

Posted
Posted
hmmm thats very interesting shao as it indicates that at 8200 rpm's the car is doing over 100km/h in second.... Im gonna have to head out and take a look at this again ;) ;) ;)

Also without starting up the whole cut out debate on my last dyno run it wasnt cutting out according to the print out until exatly 8350  :ph34r:  :ph34r:  :ph34r:  :ph34r:  hmmmm interesting .....

mine has reved just over 8500+ before as recorded by the RSM

and 100+ in 2nd is very acheiveable ;)

shaohaok Grand Master

shaohaok

Posted
  • Author
Posted
wats the password shao?

just read only for now. coz i prefer it wasn't altered for now.

u can still alter the rpm cell tho.

Blade Hunter Grand Master

Blade Hunter

Posted
Posted

Or if you are sneaky like me you can still have some fun with it ;)

,Jun 28 2005, 08:56 AM]wats the password shao?

just read only for now. coz i prefer it wasn't altered for now.

u can still alter the rpm cell tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    2. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    3. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    4. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    5. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    6. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    7. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    8. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    9. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    10. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
×
×
  • Create New...

Forums

News

Membership