DIY - LED reflectors

[dutchie101]

For those of you that love to fiddle...

Japlish conversion a go-go!

We have a genuine reflectors.

Use the acrylic cutter, was allocated from.

However, this still does not go into with an LED board (^_^;)

In addition to the base Kuri抜Kimasu.

At this time, so that machined flat substrate by placing the base portion of the mountain that is made.

To produce the LED.

Red from 16 並Bema****a FluxLED KingBright.

The resistance to the LED in the interest of space (^ ^ ゞ lighting method is, w used in the circuit

The images side by side reflector and the substrate and the base

(; ° Д °) ゙ Arayata

The size of the board to feel the sand to the base portion and the substrate and the same as the base reflector.

After the water is fixed at Basubondo also serves.

Of course, even with plenty of behind Basubondo (o ^ - ') b

Suddenly-illuminated image!

- Picture lights to change brightness

Now in the position and stop lights.

Original page here

Another quicker version(without removing the lens from the backing:

Part 1

Part 2

Another install, great idea, they added a little toggle switch to turn off the leds...

LED reflector switchable

[jeffy]

*saved* :D

[69.NIX]

/pete likes this *thumbs up*