Jump to content


Camry Atara SL 2012 Lights Upgrade


50UNIQ

Recommended Posts

I am looking into upgrading my headlights, fog lights, number plate lights and reverse lights into white, since my car colour is white and Im pretty much sick of the orange/yellowish light look.

What do you guys recommend??

HID's or Standard Phillips white look bulbs?

I want to achieve a clean install and do not want to play around too much with the cables of the car.

Cheers

Link to comment
Share on other sites


Since the white look bulbs are easier n cheaper i think ill be goin that

route and yeah yellow light makes me wanna vomit. 50 - Do ya know what

the bulb fittings are for low and high beam and also for the fog lights? Also get some pics up of the atara with ya black roof in the other thread :-)

Link to comment
Share on other sites

Yea, I reckon I'll be going with that. I am actually not sure yet, gota check the Car manual. Thanks for your suggestion and advice, always a great help :)

I will upload the pics tonight for ya to see :)

Link to comment
Share on other sites

  • 4 weeks later...

Upgrading my lights this arvo, HID's for headlights, Phillips h11 5000k for fog lights, yellow/amber parkers, white led number plate lights and revers lights. Will be posting photos of installation and final results.

  • Like 1
Link to comment
Share on other sites


  • 2 weeks later...

Hey,

Just wanted to ask if you had any luck replacing the rear number plate lights on the SL.
I have tried so hard and referred to the manual but I just cannot get the bulbs to come out.

Also any suggestions on HID kits and quality park lights and best places to purchase?
I just have baby blue parkies on my right now but haven't had the time to change the main bulbs.
They have started to fade because they are the cheap LED parkies so I thought this time around I would change both.

Thanks!

Link to comment
Share on other sites

Hey,

Just wanted to ask if you had any luck replacing the rear number plate lights on the SL.

I have tried so hard and referred to the manual but I just cannot get the bulbs to come out.

Also any suggestions on HID kits and quality park lights and best places to purchase?

I just have baby blue parkies on my right now but haven't had the time to change the main bulbs.

They have started to fade because they are the cheap LED parkies so I thought this time around I would change both.

Thanks!

They're quite easy to replace. There's a thread over at TN (http://www.toyotanation.com/forum/310-7th-generation-2012/403873-interior-led-bulbs-replacement-license-plate-lights-2.html#post3783269) with pictures of how to do this.

HID kits, there's a $55 set on eBay, they seem to last about 3 years give or take depending on usage.

The HID replacement is a pain in the backside for the 2012 for some reason - I did it for 50UNIQ and the bulb kept refusing to twist in correctly.

Also, there's these parkers, which seem interesting: http://www.ebay.com.au/itm/PHILIPS-T10-W5W-6000K-XENON-HID-WHITE-ULTINON-LED-PARKER-HSV-FPV-GTR-EVO-STI-/110849608862 - just a bit expensive lol

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Hey Guys,

HID's gave me and Fivese7en an awful time changing!! Especially trying to get the bulbs into the stock bulb adapter. Where as for the number plate lights, you'd have to take off the boot lining clips off to replace them with leds.

  • Like 1
Link to comment
Share on other sites

Hey,

Just wanted to ask if you had any luck replacing the rear number plate lights on the SL.

Hey Rains,

Check this out...

If ya not doin reverse lights as well (Which means takin out the boot lining) and its just the license plate lights then check this video... im bout to try this in the next day or so. I'll let youse know how i go.

  • Like 1
Link to comment
Share on other sites

  • 2 months later...

Hey,

Just wanted to ask if you had any luck replacing the rear number plate lights on the SL.

Hey Rains,

Check this out...

http://www.youtube.com/watch?v=1SZajvbGHoU

If ya not doin reverse lights as well (Which means takin out the boot lining) and its just the license plate lights then check this video... im bout to try this in the next day or so. I'll let youse know how i go.

Hey man, sorry for the delay! Haven't gotten around to changing it but will have a go tonight!

The video is exactly what I'm looking for! Thanks dude!

Link to comment
Share on other sites

Hey man, sorry for the delay! Haven't gotten around to changing it but will have a go tonight!

The video is exactly what I'm looking for! Thanks dude!

No probs man... I used a smaller allen key as recommended in the video. I was worried that i was gonna break somethin but it pops out fairly easily. LEDs look so much better.

  • Like 1
Link to comment
Share on other sites

Just changed my low beam H7 lights last night to Philips Blue Vision! and Changed the Licence Plate Lights to LED Wedges.

Bought the Fog Bulbs as well H11 Blue Vision and haven't had the time to change it as yet. The passenger side low beam bulb was the most difficult to pull out because of its awkward position.

The Licence Plate lights were problematic to remove as well. It wasn't as easy as the video, I ended up doing it the difficult way by removing the boot lining. :/

Next on the purchase list is the interior lighting.

  • Like 1
Link to comment
Share on other sites

Nice work man. My local Toyota installed my new Phillips fog bulb at my 1000KM service for free hehe... The pins/screws that hold the cover for the front wheel well were annoying - maybe youll have better luck with em

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

I finally installed my HID fog lights, which took 10 mins to put in! Thanks to the special kit which just plugs in and twists in place!

The kit i used:

7xyv.jpg

Result and difference between stock and HID:

d5yg.jpg

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Forums


News


Membership